SUPER-CAN INDUSTRY GROWING GROUP CO.,LTD. LD611-54043, LD611-54041, LD401-5403 User Manual

User Manual

LED PAR 54*3W RGBW

Model: LD401-5403 / LD611-54043 / LD611-54041

2018.03.22

This product manual contains important information about the safe installation
and use of this product. Please read and follow these instruction carefully and
keep this manual in a safe place for future reference.

- 1 -

1 Understanding of Product

1.1 Safety Warning

 When unpacking and before disposing of the carton, check if there is any transportation damage

before using the product. Should there be any damage caused by transportation, consult your
dealer and do not use the apparatus.

 This product is suitable for indoor and outdoor, its protection grade is IP65.
 Do not install the product or project the beam onto inflammable surfaces. Minimum distance is 5 M

.

 The product is only intended for installation, operation and maintenance by qualified personnel.

And read the user manual and labels on the lighting carefully before use.

 Product should install in a cool place. Keep away from the wall 50cm.
 Do not look directly at the lamp light (especially for epilepsy), so as not to cause damage to the

eyes.

 Keep the optical system clean. Do not touch the LED lens with bare hands. Do not use any alcohol

liquid or any other liquid to clean the optical system. Use medicinal absorbent cotton to clean it.

 Please do not attempt to dismantle and/or modify the product inner structure. Otherwise, would not

provide 1 year of free warranty.

 Electrical connection must only be carried out by qualified personnel.
 Before installation, ensure that the voltage and frequency of power supply match the power

requirement of the product.

 It is essential that each product is correctly earthed and that electrical installation conforms to all

relevant standards.

 Do not connect this device to any other types of dimmer apparatus.
 Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the

power-cord come into contact with other cables. Only handle the power-cord by the plug. Never
pull out the plug by tugging the power-cord.

 There is no user serviceable parts inside the product, do not open the housing and never operate

the product with the cover removed.

 Place the unit where kids can't reach.

If you have any questions, don't hesitate to consult our dealer or manufacturer.

Important: Before any installation, maintenance and cleaning, please
ensure that the power cut off!

- 2 -

1.2 Technical Parameters

Power supply

 Power Rated: AC100~240V 50~60Hz ± 10%
 Max Power: 180W

LED

 LED Chips: 54pcs x 3W 14xRed / 14xGreen / 14xBlue / 12xWhite
 Drive Current: 650-700mA
 Refresh Frequency: 4KHz
 Colors: 16.7 million colors
 Life Time: > 20K hours

Control

 Control Signal: DMX-512
 Channel Mode: 5 kinds channel modes. 4Chs / 5Chs / 6Chs / 7Chs / 10Chs Change by menu.
 Control Mode: DMX-512, Auto-Run, Master-Slave mode, Static mode.
 Auto Effect: 5 kinds of Auto-Run effects.

Optical System

 Dimming mode: Normal Dimming 0-100% or Fading Dimming Mode.
 Flashing rate: 1~20Hz sync or async.
 Beam angle: 15~60° (fix by lens)

Physical

 Dimensions: 294 x 220 x 324mm
 Net Weight: 2.5kgs
 Housing color: Black
 Connection: DMX cable IN/OUT, Power cable IN/OUT

Security

 Cooling System: Fan Cooling
 Operating Environment: Indoor
 Operating Temperature:-20°C～40°C

- 3 -

1.3 Product Features

Using the latest LED driver technology from SUPER-CAN, newest intelligent LED Par light can realize

intelligent operation and control through its special menu at the back. It’s more convenient and easy to

operate. This product is designed for building large area spread light, large concerts, outdoor landscape
lighting, wedding scene, small performances, night club, KTV or various performance occasion.

Features:

1) Static color Settings (STATIC).

2) 4K refresh frequency for video camera.

3) Fading dimming technology..

4) Overheating protection function

5) 5 kinds of DMX channel mode.

6) Master-slave control, multi-units for synchronous control.

7) Sync and async strobe function.

2 Product Installation

2.1 Power Connection Method

Please connect power as following ：
L（live wire）=brown wire E（earth wire）=yellow/green double color wire N（null wire）=blue wire
When connecting power, ensure that the voltage and frequency of power supply match the power
requirement of the product.
This equipment belong to class 1 protection equipment, therefore, the yellow-green double colors wire
must be earthed correctly by qualified personnel. Before installation, ensure that the voltage and
frequency of power supply match the power requirements of product. In power supply and voltage
fluctuation large areas, we suggest you to use 110V or 230V or use voltage regulator to supply power.
After electrical connection, this product will have a few seconds self-check action, self-check finished
can be used.

Input / output power cable should be 2.5 square millimeter copper core.
220V: Each series should be <16 units.
110V: Each series should be <8 units.

Important: It is essential that Yellow/green double color wire is correctly earthed
and that electrical installation conforms to all relevant standards.

- 4 -

2.2 DMX Connection Method

 If the lighting working on DMX mode it needs be connected to the DMX controller
 For example: if the lighting setup to DMX 8 channels mode, the first DMX address value must be

1st, next device should be plugs 8 (e.g., 1,9,17,25...).

 Every DMX address can be reused as needed.
 DMX address can be any data between 001 and 512.

Note:

1. As this DMX cable connection should parallel connection, please
don’t connect more than 32 units in one series.

2. If the signal cable between DMX controller and device over 300 meter,
DMX amplifier should be installed.