1 About Bluetooth Speakerphone
This portable mini-shape Bluetooth speakerphone is specially designed to give you
convenience and freedom of wireless communication which can be used as hands—free
car kit when you are in car or as conference speakerphone on desk-top when you are at
Echo Cancellation & Noise Suppression, this speakerphone creates an outstanding full
duplex sound quality for you.
2. About Bluetooth Technology
Bluetooth wireless technology is set to revolutionize the pe rsonal conn ect ivi ty by
providing freedom from wired connections-enabling links and connectivity between
notebook/laptop, mobile phones, portable handheld devices and other Bluetooth enable
Devices within in 10 meters, Utilizing global sound & digital data2.4G l S M transmission,
it makes global communication in the way you are never dreamed of!
3. Appearance and function
(1) Speaker
(2) Microphone
(3) Status indicator (LED)
(4) Charging Socket
(5) Mute button(Exchange Language and Private talking)
(6) MFB Button(Multi-Function Button) »
(7) Volume-+ (V+)
(8) Volume- (V-)
4. Charging the Battery
The Product with built-in rechargeable battery can be charged random by the equipped
charger. First use your Bluetooth speaker. Please charge the speakerphone fully.
(1) Prior to using the speakerphone, it is recommended to charge the battery fully for the
LED Indicator will be off and voice report 'Power off"
important Notice:
(1) Charging indication will be delayed for a few minutes if the speakerphone has not
been used for a longtime or the battery is drained.
(2) To prolong durability of battery and ensure the stability of Speakerphones functioning,
it’s recommended to charge the speakerphone immediately whenever low battery voltage
battery condition.
(3)
and turn off in 30 seconds.
5.Power On/off the Speakerphone
Power on: hands-free shutdown state long press "MFB" (Multi Function Button) button
for 2 seconds, until you hear a short beep, voice prompt "Power on" Will be automatically
connected to the mobile phone recently connected.
Power off: In standby mode, press and hold the "MFB“ button for 3 seconds until you
f”
6.Pairing
Automati c or manual connection after searching will appl y t o the mobile phone’s
with Bluetooth-enabled mobile phones .The paring process is as following:
(1)Place the speakerphone and mobile phone no farther than 1 meter apart.
(2) Ensure the speakerphone is under OFF mode.
Press and hold the 'MFB' button for 6 seconds until you hear voice report "Ready to pair",
(3)
(4) Activate your mobile phone’s Bluetooth function and search for available Bluetooth
devices by referring to your mobile phone user manual for details:
(5) Select “BT Speakerphone” from the list.
(6 ) Ent er the pre -pr ogr am med code" 0000" to pair the mobile phone wit h t he
speakerphone. When pairing is completed, you may hear a long beep and blue LED
“Phone connected”,then the speakerphone will go to standby mode in blue LED
(7) Ensure your Hands-free Bluetooth and mobile phone is placed within 10metersBluetooth sensing distance and there is no much interference around.
IMPORTANT NOTICE:
During the paring process, if you cannot get successful paring within 2 minutes, the
speakerphone will power off. Please repeat the above steps to pair again.
Automatic pairing between Speakerphone and Mobile Phone.
(1) The speakerphone will automatically connect to the mobile phone matched last time;
(2) When the speakerphone is power off or the connected mobile phone is more than 10
meters away from the speakerphone, they will be out of connection automatically and
Voice Prompt "Phone is disconnected".
(3) Once the speakerphone is powered on again within 10 meters from the Mobile phone
will automatically connect to the hands-free will be a long beep to indicate the pairing
was successful.
disconnec tion. (
(5) You may want to connect your speakerphone with another Bluetooth phone.
Select disconnect ing”. to remove connection from your phone list as a result, the
speakerphone will disconnect with its pre-paired phone and voice report "Phone is
disconnected".
Notice: When losing the connecting, the blue LED indicator will blink shortly and quickly,
then the speakerphone will power off automatically after 10 minutes.
7. Using the Speakerphone
a. Ensure your speakerphone and mobile phone is placed within 10meters-bluetooth
sensing distance.
b. Alter successful Bluetooth any incoming or outgoing call will automatically connected
to this speakerphone first, you can operate your mobile phone and transfer back to
mobile phone.
Once pairing is completed and battery is fully charted the follow functions would be
available for you.
(1) Making a call:
You can initiate calls from your mobile phone or directly from this speakerphone using
voice dialing commands. (if this feature is supported by your mobile phone).
Making a call from your mobile Dial directly from Bluetooth-connecte
the outgoing call will automatically connect to this speakerphone and with Voice Prompt
“Outgoing call 1" Voice-dialing:
Ensure your mobile phone can support the voice dialing function and your head set if
before you use this function. In standby mode, short press the MFB button to activated .
At this time the voice dialing function in mobile phone will be automatically activated,
please speak out the name of your expected toward the microphone, (Please refer to
mobile phones user manual). Caution: only apply to the mobile phone with function
(2) Answering a call:
Whenever there is an incoming call, or receive the call via your mobile phone in the
normal way.
Once the call coming, the speakerphone will ring when the call is coning, short press the
"MFB" button to receive call. If the phone is set under auto-answering mode, the user
needn’t press Talk to access calls. It’ll be diverted to speakerphone automatically.
(3) Ending a call:
During talking status, if you want to end this call, just short press the "MFB" button once
to end the call or end the call via your mobile phone in the normal way.
(4) Reject a Call:
Whenever you would like to reject incoming telegram , press and hold the "MFB" button
for 3 seconds until you hear a short beep. Or short press "MUTE" key Reject a Call.
(5) Last Number Re-dialing:
Under standby mode, short press “MFB” button twice for the last number redialing with
voice report "Outgoing calls".
Automati c or manual c onnection will appl y to the mobile phone’s
d mobile phone,
setunim 01 retfa yllacitamotua ffo rewop lliw enohprekaeps eht ,esiwrehtO )4(
(6) Adjusting the Volume:
Hands-free calls in the state, short press "V+" and "V-" key to adjust the volume, until the
required volume adjustment, voice minimum and maximum values will be issued when
the "Ding, Ding, Ding" sound, that have been transferred to the maximum and minimum.
(7) Conversation switch between mobile phone and the mobile phone.
A. From speakerphone to mobile phone:
When the conversation is in progress through the mobile phone, press the mode button
activate, then the conversation will be switched from the speakerphone to the mobile
phone, press the Mode button again, the conversation will be switched from the mobile
phone to speakerphone.
Remark: this function is not available for all Bluetooth-enabled device; it depends on the
compatibility of the paired device.
8. Disconnection.
You m ay disconnect the S peakerphon e f rom yo ur mobile by powering o ff the
Speakerphone or select: BT Speakerphone" on your phone and disconnected. Handsfree and voice prompt "mobile phone has been disconnected".
In case of disconnection from the mobile phone when the Speakerphone is on, the
speakerphone will be shut down automatically after 10 minutes.
Voice Prompt selection.
9.
The speech the product supports two languages, Chinese, English, playing default to
Chinese, if you want to switch English speech, press "MUTE" button for 3 seconds and
will hear English voice prompt, "has been selected English" when heard English when
prompted, loosen the hand, can be selected that language is English.
Also, need to switch back to the Chinese, long press "MUTE" button for 3 seconds and
will hear Chinese voice prompt, "has been selected Chinese" when you hear the Chinese
when prompted, loosen the hand, can be selected for Chinese language tips.
Note: the original version of the product only speech default language tips, speech
upgraded version can support multiple languages, methods of operation with the above
operation.
10 .Restore to Default settings-Remove Previous Pairing & Connection
To reset the speakerphone with its default settings and cle
ar the previous pairing
information, please take the following steps.
(1) Ensure that the speaker in the shutdown state.
(2) Long press "MFB" key and do not put, the first boot, then enter pairing, always
according to the hands-free automatic shutdown to loosen the hand, the hands-free has
restore factory settings (without any Bluetooth hands-free memory device is matched),
restart the restore factory settings.
11. Lower voltage protection of battery.
When the battery voltage is low to 3.3V, will hear the voice prompt "low battery", the red
free automatically shut down.
12. LED indication
Speakerphone Status Red LED Blue LED Sound Voice report
Off Mode Off Off
Power On On for 2 sec On for 3 sec Yes
Power Off On for 3 sec Yes
Standby before pairing Flash on every 3 sec
Standby after pairing Flash on every 3 sec Yes
Standby low Voltage Flash on every 3
Call state Flash on every 3 secretary Yes
pairing in progress Flash on
pairing Completed Flash on every 3 sec Short beep
Charging in Progress Steady on
Charging Completed Off
13. Care and Maintenance
(1) Do not expose the speakerphone to liquid, moisture or humidity, as it is not water proof
(2) Do not use abrasive cleaning solvents to clean the speakerphone.
(3) Do not place the speakerphone in high temperature, as it may result in an explosion
(4)
Do not expose the speakerphone to sharp objects as this will cause scratching and damage.
(5) Do not attempt to disassemble the speakerphone, as it does not contain serviceable
components.
(6) If you do not use the speakerphone for the long time, be sure to store it in a dry
Place, room temperature. The hands-free battery should be stored separately.
14. Safety information
(1) Check local laws regarding use of a mobile phone and speakerphone while driving.
if
you use the speakerphone while driving, ensure your attention and focus remains on
your responsibility of driving safety.
(2)
Never allow children to lay with the speakerphone. Small parts may be a choking hazard.
(3) Observe all signs that require an electrical device or RF radio product to be switched
off in the designated areas. These could include hospitals, blasting areas, and potentially
explosive atmosphere.
(4) Turn off your speakerphone prio r to boarding an aircraft. Do not use your
Speakerphone on an airplane.
(5) Never place or store the speakerphone over the area of the automobile’s safety
airbag deployment, or it may cause serious injury when a safety airbag deploys.
Trouble shooting
15.
If you are unable to connect the speakerphone and mobile phone, please try as follows:
(1) Ensure the speakerphone is paired with your mobile phone.
(2) Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your
(3) Ensure the speakerphone is within a maximum of 10 meters of your mobile * phone(s)
and there are no obstructions, such as wall or other electronic device in between as it
may cause shorter of interfere transmission.
secretary
alternately
Flash on every 3 secretary Yes
Yes
(4)
If all the above steps do not resolve your problem, please remove your battery for a while.
The Bluetooth speakerphone is compliant with and adopts the Blu
However Interoperability between the device and other Bluetooth-enable products Is not
guaranteed because it depends on compatibility.
Operating Frequency Band--------2.4GHz to 2.48GHz unlicensed ISM band
Rechargeable------:3.7Vdc 650Mah (#BL-5B compatible)
AD/DC Charger------:DC5-6V 500Mah
Normal Charge Time ------Up to 3hrs.(approx)
Talking time ------Up to 16hrs
Standby time ------Up to 1000hrs
Dimension------Bluetooth Speakerphone: L11.5CM*W4.5CM*H1.4CM
Weight------: Bluetooth Speakerphone:45g(Without battery)
Not e: The abov e configuration m ay change or upgrade according to the product
development plan
Without any prior notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following.
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
7KHGHYLFHKDVEHHQHYDOXDWHGWRPHHWJHQHUDO5)H[SRVXUHUHTXLUHPHQW7KHGHYLFH
FDQEHXVHGLQSRUWDEOHH[SRVXUHFRQGLWLRQZLWKRXWUHVWULFWLRQ
Loading...