763
Small / Slim Object Detection Area Sensor
NA1-11
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
PARTICULAR
USE SENSORS
USE SENSORS
SENSOR
OPTIONS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
Related Information
General terms and conditions ............. P.1■ Sensor selection guide
Glossary of terms.......................... P.983 ~■ General precautions ..................... P.986 ~■
SUNX website
http://www.sunx.com
■
..... P.11~ / P.727~
Conforming to
EMC Directive
Make sure to use light curtains
when using a sensing device
for personnel protection.
Refer to p.477~ for light curtains.
PNP output
type available
(Excluding 5 m cable length type)
Cross-beam scanning system to detect slim objects
UL Recognition
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
Letter or visiting card detectable!
Slim objects can be
detected by using the
cross-beam scanning
system.
Wide area
Though being very slim,
it realizes a wide sensing
area of 1 m
and 100 mm
It is most suitable for
object detection on a
wide assembly line, or for
detecting the dropping
of, or incursion by, small
objects whose travel path is
uncertain.
3.281 ft length
3.937 in width.
1 m
3.281 ft
100 mm
3.937 in
Emitting and receiving element pitch: 10 mm 0.394 in
A minimum sensing
object size of ø13.5 mm
ø 0.531 in is realized by
using an emitting and
receiving element pitch
of 10 mm
0.394 in.
Just 10 mm 0.394 in thick
It is extremely slim, being just 10 mm 0.394 in thick.
Further, it can be mounted in a narrow space since you
can select from two cable orientation directions.
It is possible to select from two cable orientation directions.
Globally useable
It conforms to the EMC Directive and has UL Recognition.
Moreover, PNP output type, which is much in demand in
Europe, is also available.
ORDER GUIDE
P.765
SPECIFICATIONS
P.766
I/O CIRCUIT DIAGRAMS
P.767
Small / Slim Object Detection Area Sensor NA1-11
SENSING CHARACTERISTICS
P.767 ~
PRECAUTIONS FOR PROPER USE
P.768 ~
DIMENSIONS
764
P.769 ~
APPLICATIONS
Detecting post-cards Detecting falling objects whose
WARNING
Never use this product in any
personnel safety application.
No synchronization wire
Wiring is saved and made simple as no synchronization
wire is required between the emitter and the receiver.
path is uncertain
Clearly visible indicator
A clearly visible large indicator, having a 55 mm 2.165 in
width, is incorporated on both the emitter and the
receiver. Further, if the sensing output is directly
connected to the large indicator input, the indicator can
be conveniently used as a large operation indicator.
Moreover, its operation can be selected as lighting or
blinking.
Detecting edge of moving object
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
PARTICULAR
USE SENSORS
USE SENSORS
SENSOR
OPTIONS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
55 mm
2.165 in
Cross-beam Scanning System
In a conventional area sensor, slim objects cannot be detected since the emitting and the receiving elements are
scanned, synchronously, as a set. In contrast, in NA1-11, only the elements
obtain emission. The elements of the receiver are not scanned, so that when element
all the elements of the receiver receive light. Hence, even if there is one element on the receiver which does not
receive light, it results in light interrupted operation. With this technique, detection of slim objects is possible.
Conventional area sensor
Scanning
ReceiverEmitter
Scanning
Scanning
Emitter
1
to 11 of the emitter are scanned to
1
of the emitter emits light,
NA1-11
Non-scanning
Receiver
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
765
Small / Slim Object Detection Area Sensor NA1-11
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
INDUCTIVE
PROXIMITY
PARTICULAR
PARTICULAR
SYSTEMS
MEASURE-
CONTROL
MARKERS
Notes: 1) The sensing range is the possible setting distance between the emitter and the receiver.
SENSORS
SENSORS
USE
USE
SENSORS
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
MENT
SENSORS
STATIC
DEVICES
LASER
ORDER GUIDE
Type Appearance Sensing range (Note1) Model No.(Note2) Output
NPN output
Sensing height:
5 m 16.404 ft
cable length
PNP output
The sensor can detect an object less than 0.17 m
Receiver cannot be
placed in this range
Emitter Receiver
100 mm 3.937 in
No. of elements
per emitter /
receiver: 11
Actual sensing range of the sensor
0.17 m 0.558 ft
Element
pitch: 10 mm
0.394 in
Setting range of the receiver
0.17 to 1 m
0.558 to 3.281 ft
0.558 ft away.
1 m 3.281 ft
Receiver
2) The model No. with suffi x “P” shown on the label affi xed to the product is the emitter, “D” shown on the label is the receiver.
(e.g.) Emitter of NA1-11: NA1-11P, Receiver of NA1-11: NA1-11D
NA1-11
NA1-11-C5
NA1-11-PN
NPN open-collector transistor
PNP open-collector transistor
OPTIONS
Sensor mounting bracket
Designation Model No. Description
MS-NA1-1•
Sensor
mounting
bracket
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
MS-NA1-1
MS-NA2-1
Four bracket set
Four M4 (length 15 mm
eight nuts, four hooks, four spacers and eight M4 (length
0.709 in) screws with washers are attached.
18 mm
(Spacers are not attached with MS-NA1-1.)
0.591 in) screws with washers,
M4 screws with washers, nuts
and hooks are attached.
MS-NA2-1•
M4 screws with washers, nuts,
hooks and spacers are attached.
Small / Slim Object Detection Area Sensor NA1-11
766
SPECIFICATIONS
Type NPN output PNP output
Item Model No. NA1-11 NA1-11-PN
Sensing height 100 mm 3.937 in
Sensing range (Note 2) 0.17 to 1 m 0.558 to 3.281 ft
Element pitch 10 mm 0.394 in
Number of emitting / receiving
elements
Sensing object ø13.5 mm
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption Emitter: 80 mA or less, Receiver: 100 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Output
•
•
Applied voltage: 30 V DC or less (between output and 0 V)
•
Residual voltage: 1 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current)
Utilization category DC-12 or DC-13
Output operation ON or OFF when beam channel is interrupted, selectable by operation mode switch
Short-circuit protection Incorporated
Response time In Dark state: 5 ms or less, In Light state: 10 ms or less
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED
Emitter
Operation indicator: Orange LED (lights up when the output is ON)
Indicators
Receiver
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED
Pollution degree 3 (Industrial environment)
Protection IP62 (IEC) (Refer to p.984 for details of standards)
Ambient temperature –10 to 55 °C
+14 to +131 °F (No dew condensation or icing allowed), Storage: –20 to +70 °C –4 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓ x at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance
Vibration resistance 10 to 150 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s
Emitting element Infrared LED (Peak emission wavelength: 880nm
Material Enclosure: Heat-resistant ABS, Lens: Acrylic, Indicator cover: Acrylic
Cable 0.3 mm
Cable extension Extension up to total 100 m
Weight Net weight: Emitter 80 g approx., Receiver 85 g approx, Gross Weight: 210 g approx.
Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m
away.
Receiver cannot be
placed in this range
Actual sensing range of the sensor
0.17 m 0.558 ft
Setting range of the receiver
11 Nos. each on the emitter and the receiver, respectively
ø0.531 in or more opaque object (Note 3)
PNP open-collector transistor
Maximum source current: 100 mA
•
•
Applied voltage: 30 V DC or less (between output and +V)
•
Residual voltage: 1 V or less (at 100 mA source current)
0.4 V or less (at 16 mA source current)
Power indicator: Green LED (lights up when the power is ON)
lights up or blinks when the
Large indicator: Orange LED
large indicator input is Low,
lighting pattern is selected
by operation mode switch
Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
lights up or blinks when the
Large indicator: Orange LED
large indicator input is Low,
lighting pattern is selected
by operation mode switch
2
acceleration (50 G approx.) in X, Y and Z directions for three times each
0.035mil, cross-beam scanning system)
2
4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable.
1 m 3.281 ft
lights up or blinks when the
large indicator input is High,
lighting pattern is selected
by operation mode switch
lights up or blinks when the
large indicator input is High,
lighting pattern is selected
by operation mode switch
0.558 ft
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
PARTICULAR
USE
USE
SENSORS
SENSORS
SENSOR
OPTIONS
WIRESAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
Emitter Receiver
Receiver
3) Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected
differs with the setting distance. When this sensor is used to detect slim objects, make sure to confi rm stable detection using the actual objects.
767
Small / Slim Object Detection Area Sensor NA1-11
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
PARTICULAR
USE
USE
SENSORS
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
I/O CIRCUIT AND WIRING DIAGRAMS
NA1-11
I/O circuit diagram
Sensor circuit
Notes: 1) The emitter does not incorporate the output
Symbols … D : Reverse supply polarity protection diode
NA1-11-PN
I/O circuit diagram
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
Sensor circuit
Notes: 1) The emitter does not incorporate the output
Symbols … D : Reverse supply polarity protection diode
SENSING CHARACTERISTICS (TYPICAL)
Correlation between setting distance and excess gain
100
50
Color code
(Brown) +V
D
Tr
Large indicator
lighting / blinking circuit
D
Z
E
(Black) Output (Note 1)
100 mA max.
(Blue) 0 V
(Pink) Input
Users’ circuitInternal circuit
Load
*1
(black).
2) Unused wires must be insulated to ensure that
they do not come into contact with wires already
in use.
D
: Surge absorption zener diode
Z
Tr : NPN output transistor
E : Large indicator (INDICATOR)
Color code
(Brown) +V
D
Z
Tr
D
Large indicator
lighting / blinking circuit
100 mA max.
(Black) Output (Note)
(Blue) 0 V
(Pink) Input
E
Load
*1
Users’ circuitInternal circuit
(black).
2) Unused wires must be insulated to ensure that
they do not come into contact with wires already
in use.
D
: Surge absorption zener diode
Z
Tr : PNP output transistor
E : Large indicator (INDICATOR)
+
12 to 24 V DC
± 10 %
–
1*
Non-voltage contact or
NPN open-collector transistor
Input
•
Low (0 to 2 V): Lights up or blinks
High (5 to 30 V, or open): Lights off
+
12 to 24 V DC
± 10 %
–
1*
Non-voltage contact or
PNP open-collector transistor
Input
•
Low (4 V or more): Lights up or blinks
High (0 to 0.6 V, or open): Lights off
Wiring diagram
or
Wiring diagram
or
NPN output type
Color code
Brown
Black (Note 1)
Blue
Pink
Load
*1
+
12 to 24 V DC
± 10 %
–
Notes: 1) The emitter does not incorporate the black
lead wire.
2) Unused wires must be insulated to ensure
that they do not come into contact with
wires already in use.
PNP output type
Color code
Brown
Black (Note 1)
Load
Blue
*1
Pink
Notes: 1) The emitter does not incorporate the black
lead wire.
2) Unused wires must be insulated to ensure
that they do not come into contact with
wires already in use.
+
–
12 to 24 V DC
± 10 %
10
Excess gain
5
1
0
3.281
1
Setting distance L (m ft)
3
2
9.843413.123516.404
6.562
Small / Slim Object Detection Area Sensor NA1-11
768
SENSING CHARACTERISTICS (TYPICAL)
Parallel deviation
Vertical direction
ℓ
Receiver
Emitter
Horizontal direction
ℓ
Receiver
Emitter
1
3.281
0.5
1.640
Setting distance L (m ft)
0
400
200
15.748
7.874
(Down) Left Center Right (Up)
Operating point ℓ (mm in)
Vertical direction
Horizontal
direction
0
7.874
200
400
15.748
Correlation between setting distance and minimum length of detectable object
7.874
5.906
3.937
1.969
Min. length of detectable object a (mm in)
200
150
100
50
0
Setting distance L (m ft)
0.5
1.640
1
3.281
The minimum length of the detectable object, which lies in a plane perpendicular to
the sensor front surface, varies with the setting distance, as shown in the left graph.
However, note that the minimum length of the detectable object also varies with the
object thickness.
* The sensing object is considered to be placed at the center of the sensing area.
Angular deviation
Emitter angular deviation
Receiver
Receiver angular deviation
Receiver
L (m ft)
a (mm in)
Emitter
b = 30 mm 1.181 in or more
Thickness = 0.8 mm 0.031 in
Emitter
Emitter
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
L
θ
L
θ
b
Receiver
1
3.281
0.5
1.640
Setting distance L (m ft)
0
20
(Down) Left Center Right (Up)
Emitter &
receiver angular
deviation
0
10
Operating angle θ ( ° )
10 20
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
PARTICULAR
USE
USE
SENSORS
SENSORS
SENSOR
OPTIONS
WIRESAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PRECAUTIONS FOR PROPER USE
Never use this product as a sensing device
•
for personnel protection.
For sensing devices to be used as safety
•
devices for press machines or for personnel
protection, use products which meet laws
and standards, such as OSHA, ANSI or IEC
etc., for personnel protection applicable in
each region or country.
If this product is used as a sensing device for
•
personnel protection, death or serious body
injury could result.
For a product which meets safety standards,
•
use the following products.
Type 4: SF4B series (P.481~)
Type 2: SF2B series (P.515~)
Mounting
Use M4 screws with washers and M4 nuts. The tightening
•
torque should be 0.5 N·m or less.
(Please arrange the screws and nuts separately.)
M4 screws with
washers
M4 nuts
Refer to p.986 ~ for general precautions.
Selection of large indicator operation
Lighting / Blinking is selected by the operation mode
•
switch on the emitter and the receiver.
Operation of
large indicator
Lighting
Blinking
Operation mode switch
Emitter Receiver
BLINKLIGHT
BLINKLIGHT
BLINKLIGHT
BLINKLIGHT
Selection of output operation
The output operation mode is selected by the operation
•
mode switch on the receiver.
The switches must be set with the power supply off.
The operation mode does not change if the switch setting
is changed with the power supplied.
Operation mode switch
(Receiver)
D-ON
L-ON
L/OND/ON
L/OND/ON
Output operation
ON in Dark state
OFF in Dark state
Note: LIGHT / BLINK switch is not related to the output operation selection.
Operation indicator
(Orange)
Lights up when the
output is ON
Lights up when the
output is ON
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
769
v
Small / Slim Object Detection Area Sensor NA1-11
FIBER
SENSORS
LASER
SENSORS
ELECTRIC
SENSORS
ELECTRIC
SENSORS
SENSORS
COMPONENTS
PRESSURE
INDUCTIVE
PROXIMITY
PARTICULAR
PARTICULAR
SYSTEMS
MEASURE-
CONTROL
MARKERS
Others
PHOTO-
MICRO
PHOTO-
AREA
SAFETY
SENSORS
SENSORS
USE
USE
SENSORS
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
MENT
SENSORS
* Refer to “Parallel deviation” on p.768 .
STATIC
DEVICES
LASER
PRECAUTIONS FOR PROPER USE
Do not use during the initial transient time (0.5 sec.) after
•
the power supply is switched on.
Although this sensor can detect slim objects by using the
•
cross-beam scanning system, the size of the slim object
which can be stably detected differs with the setting
distance. Hence, when the sensor is used to detect slim
objects, make sure to confi rm stable detection using the
actual objects.
In case of this sensor, light from the emitter spreads
•
above and below the sensor. Hence, take care that if
there is a refl ective object above or below the sensor it
will affect the sensing.
Reflective ceiling
Emitter
Reflective floor
DIMENSIONS (Unit: mm in)
Recei
The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com
Refer to p.986 ~ for general precautions.
NA1-11 NA1-11-PN
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
2-ø4.6 ø0.181 supplementary
mounting holes, 1.1 0.043 deep
(on both sides)
10
0.394
Large indicator
(Orange)
Power indicator
(Green)
15
0.591
100
3.937
(Sensing height)
Emitter Receiver
2-ø4.5 ø0.177 mounting holes
with M4 nut seats, 3.3 0.130 deep
(1.1 0.043 deep on back side)
30
1.181
18
0.709
5 0.197
Operation
mode switch
140
130
5.512
5.118
5 0.197
ø3.7 ø0.146 cable,
2 m 6.562 ft long
2-ø4.5 ø0.177 mounting holes
with M4 nut seats, 3.3 0.130 deep
(1.1 0.043 deep on back side)
5 0.197
Operation
mode switch
130
140
5.118
5.512
5 0.197
ø3.7 ø0.146 cable,
2 m 6.562 ft long
2-ø4.6 ø0.181 supplementary
mounting holes, 1.1 0.043 deep
(on both sides)
30
1.181
18
0.709
0.591
3.937
(Sensing height)
15
Large indicator
(Orange)
100
Power indicator
(Green)
Operation indicator
(Orange)
0.394
Sensor
10
Small / Slim Object Detection Area Sensor NA1-11
770
DIMENSIONS (Unit: mm in)
MS-NA1-1
20
0.787
6
10
0.236
0.394
18
0.709
40
1.575
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Four bracket set
Four M4 (length 15 mm
with washers, eight nuts, four hooks and
eight M4 (length 18 mm
with washers are attached.
M4 (length 18 mm 0.709 in) screws with
washers are not used for NA1-11.
MS-NA2-1
0.197
20
0.787
0.236
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Four bracket set
Four M4 (length 15 mm
eight nuts, four hooks, four spacers and eight M4
(length 18 mm
0.591 in) screws
0.709 in) screws
75
2.953
45
1.772
30
1.181
5
6
18
0.709
0.591 in) screws with washers,
0.709 in) screws with washers are attached.
0.787
6
0.236
0.236
2-ø4.6 ø0.181 holes
4-ø4.6
ø0.181
holes
20
0.787
20
6
The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.com
Sensor mounting bracket (Optional)
Assembly dimensions
Mounting drawing with the receiver
2-M4 screws with washers
0.787
10
32
1.260
20
(18.6)
(0.732)
2-hooks
6
0.236
4.6
0.181
4.6
0.181
2-M4 nuts
10
0.394
110
4.331
10
0.394
10
0.394
0.236
t 1.6
t 0.063
0.181
4.6
0.866
6
1.181
40
1.575
t 2
t 0.079
22
6
0.236
4.6
0.181
4.6
0.181
140
5.512
5
0.197
130
5.118
30
1.181
2-M4 nuts
18
0.709
25
10
0.984
0.394
15
0.591
100
3.937
Sensing
()
height
Sensor mounting bracket (Optional)
Assembly dimensions
Mounting drawing with the receiver
75
2.953
45
1.772
20
0.787
4.6
30
0.181
1.181
37
30
1.457
80
3.150
30
1.181
6
0.236
6
0.236
2-hooks
18
0.709
30
0.394
1.181
15
0.591
100
3.937
Sensing
()
height
2-M4 screws
with washers
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
PARTICULAR
USE
USE
SENSORS
SENSORS
SENSOR
OPTIONS
WIRESAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
Selection
Guide
Wafer
Detection
M-DW1
HD-T1
Liquid Leak
Detection
EX-F70 /
EX-F60
Liquid Level
Detection
EX-F1
Color Mark
Detection
LX-100
FZ-10
Small / Slim
Small / Slim
Object Detection
Object Detection
NA1-11
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
Loading...