Sunwe Electronic Technology IAEB16 User Manual

FCC WARNINGS
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
ADDITIONAL WARNINGS
• WARNING: To prevent or shock hazards, do not expose this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• WARNING: to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands handling.
product meets and complies with all Federal regulations.
To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. gradually turn up the volume until you reach a comfortable listening level.
should never be disposed of in normal
product may contain chemicals known
placing headphones in/on your ears,
International Support
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
Para descargar este Manual del Usuario en Inglés, Español y Francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en:
Warranty
For Warranty Information and the most up-to-date version of this User’s Guide, go to:
Pour télécharger ce guide de l’utilisateur en Anglais, Espagnol ou Français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur:
.
Made Green
Protect for Today
Sustain for Tomorrow
Wireless Stereo Earbuds
User’s Guide for Model IAEB16-1599-01
Features
Overview & Controls
Battery Power
Pairing a Bluetooth Device Playing Audio Wirelessly
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Digital volume control
• Built-in microphone
• Micro-USB port for battery recharge
• Wireless range: 33 feet
• DC battery power: built-in rechargeable
lithium ion battery
• Battery life: approx. 4 hrs at 100% volume 6 hrs at 50%
Includes
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
Microphone
DC Power Input
Use with USB charging cable
Pairing/Power Indicator
Volume Up
Power / Pair / Play / Pause /Speakerphone
Press and hold to power ON or OFF. Press & Hold for 4 seconds to Pair.
Press to play or pause audio. Press to answer
incoming call.
Volume Down
Initial charge time is approximately 2 hours.
1. Using a Micro-USB to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor to charge the unit. Charge fully before use.
LED Indicators
Status Indicators
Power On Flashing blue light
Low Battery Flashing red light
Charging Red light
Finished Charging Blue light
Pairing Wireless Flashing red and blue lights
If your device should become unpaired, or you nd it is unable to connect normally, repeat the steps below.
1. Power on the unit by pressing and holding the Power/Pair button for approximately 4 seconds. The indicator will ash red and blue. (When
pairing, remain within 3 feet of the unit.)
2. Using the controls on your Bluetooth device, select IAEB16 in your Bluetooth settings to pair. (If your device requests a password, enter the
default password 0 0 0 0 )
3. Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices. After initial pairing, the unit will stay paired unless unpaired manually by the user, or erased due to a reset of the device.
1. Use the controls on the connected Bluetooth device to select and begin playing an audio track. (Audio from the connected Bluetooth device
should now be heard through the earbuds.)
2. To play or pause audio, press the Play/Pause button, or use the controls on the connected Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button, or use the controls on the connected phone.
2. To end a call, press the Speakerphone button, or use the controls on the connected phone.
3. To re-dial the last dialed number, press
the Speakerphone button twice.
Loading...