Sunvision Scientific SV101 IGUANA Hardware Installation Manual

Sunvision Scientific Inc.

SV101 IGUANA Active Surveillance

System

Hardware Installation Manual

Version 1.25

Sep. 2006

Revision History

Date Version Remark

2006/4 1.2
2006/9 1.25 PAL

2007/02/27 2.0 System requirements and setup

1

Sunvision Scientific Inc.

1 SYSTEM CONFIGURATION DIAGRAM.....................................................3

2 SYSTEM REQUIREMENTS AND SETUP....................................................4

3 SV101 COMPONENTS .........................................................................6

3.1 SV1018 IGUANA Active Surveillance module.............................8

3.2 SV1010 MPEG4 real time hardware compression video card..13

3.3 Watchdog reset cable setup......................................................17

4 SV1010 PC END CONNECTOR...........................................................18

4.1 SV1010 PC end connector Introduction....................................18

4.2 SV1010 PC Side Connector Connection...................................19

4.3 RJ45 connector PIN definition...................................................20

5 SV1015 RELAY I/O CONTROL BOARD .................................................21

6 CAMERA SETUP STEPS ......................................................................22

7 CAMERA MODULE INSTALLATION TIPS................................................26

7.1 Introduction................................................................................26

7.2 The Camera Module Installation Guidelines .............................26

7.3 Where to Install the Camera Module.........................................28

2

Sunvision Scientific Inc.

1 System Configuration Diagram

SV101 IGUANA Active Surveillance System

3

Sunvision Scientific Inc.

2 System requirements and setup

Recommended specifications of computer

z CPU
z RAM
z Individual VGA Card
z SATA HD Control

Card

z VGA Card Slot
z Hard disc
z Operation System

Intel PD or Core 2 Dual (or above)
1GB or more of DDR (DDR II ) RAM
AGP x 8 Interface or PCI-E x 16 Interface
PCI-E Interface or PCI-X Interface

PCI Interface or PCI-X Interface
120GB x1 + 250GB or more x1
Windows XP Home Edition or Professional

z Note 1: There could be bias oblique on the preview screen when your computer

system is operated under a high load (Recording and realtime preview of 8
channels at the same time which is under the setup of 720 x 240 resolution，15 fps

or more. These conditions mean the data flow on the PCI channel was
overloaded and data has been lost .It was recommanded that you DO NOT add
any other PCI interface cards besides our SV1010 video compression card.
Individual VGA Card and SATA HD Control Card please use other interface
besides PCI, e.g. PCI-E interface or PCI-X interface.

z Note 2: Please disable the function of Hyper Threading Technology on the

CPU setup page of BIOS, or the PC will crash more often.

z Note 3: The PC system should have minimum three (3) partitions. The first

partition (C:\) is reserved for the Operation System, IGUANA software and other
application software, minimum two partitions are required for IGUANA recording
files. The second HD for recording should be divided into at least two partitions. If
only one HD is available, it should be divided into at least three partitions.

4

Sunvision Scientific Inc.

BIOS Setup

z Note 4: It needs very high system resources to operate the SV101 Iguana

recording system. We recommended that you DO NOT install any other
unnecessary applications besides the OS and SV101 recording system to avoid
the recording system not working properly.

5

Sunvision Scientific Inc.

3 SV101 Components

When you receive the package of SV101, please open it and check the following
items in the package.

1. SV1018 Camera Module

2. SV1018 Camera Module warranty card

3. SV1010 Package
A. SV1010 warranty card
B. PC side connector
C. SV1010 Video Card
D. Watchdog cable

4. Mounting kit

5. Screws

6. CD

6

Sunvision Scientific Inc.

SV1018Monitor

SV1010 Package

Screw Sets

CD

Mounting
Kit

SV1018
Warranty
Card

SV1010 Video Card

SV1010 Warranty Card

PC Side Connector

Watchdog reset cable

7

Sunvision Scientific Inc.

3.1 SV1018 IGUANA Active Surveillance module

3.1.1 Dimension of camera module and mounting kit

Method 2 Method 1

8

Sunvision Scientific Inc.

3.1.2 Camera module allocation map

9. Screws

8. IR module

5. Motor & Mirror

module

6. Wild angel camera

7. Telescopic camera

4. Terminal board

3. Motor control

circuit board

2. Power supplier

1. Upper housing

3

2

4

1

758 6 9

3.1.3 Camera Setup

3.1.3.1 Wild angle camera setup

1: BLC (Backlight Compensating function)
2: ATW/AWC (White Balance auto tracing/auto locking)
3: MIRROR (Video mirror function)
4: ZOOM (2 times digital amplification)

9

Sunvision Scientific Inc.

The function will be activated when the switch is set on the position
of ON. The default is as the above figure shows.
Note: The function of 2x two times digital zoom can be used in the
applications where the area of interest is narrow and long. 2x digital
zoom can be activated by switching SW4 to ON position. (Please
refer to chapter 7, Camera Module Installation Tips.)

3.1.3.2

Telescopic camera setup

1: AES/ALC (Auto Electrical Shutter)
2: BLC (Backlight Compensation function)
3: AGC (Auto Gain Control)
4: ATW/AWB (White Balance auto tracing/auto locking)
5: MIRROR (Video mirror function)
6: ZOOM (2 times digital amplification)

10