TT-SK15
USER MANUAL
SOUND BAR
Contents
Features .....................................................................................................................2
For your Attention........................................................................................................3
Panel.......................................................................................................................4-5
Connections.............................................................................................................6-7
Remote Control........................................................................................................8-9
Basic Playback..........................................................................................................10
Trouble shooting........................................................................................................11
Specifications...........................................................................................................12
-1-
Contents
Features
Thanks for your purchase of our product. Please read through this manual before making
connections and operating this product. Retain this manual for future reference.
Line input
AUX input
Optical input
Coaxial audio input
Full function remote control
Bluetooth playback
Package Contents:
User manual
l
ua
an
er m
Us
Remote control
-2-
For Your Attention
IMPORTANT NOTES
Please read through this manual before making connections and operating this product. Retain this manual for
future reference.
Don't open the cabinet of this unit. No user-serviceable parts inside. Refer servicing to qualified personnel only.
Switch off the unit when you don't use it. Switch off the unit and disconnect it from the AC power supply when it is
not being used for a long time.
Don't install the unit in a place exposed to heating sources or direct sunshine.
Don't install the unit in a place exposed to moisture or rain.
The apparatus shall not be exposed to dripping or splashing and any object filled with liquids, such as vases shall
not be placed on it.
Install the unit on a horizontal, flat and firm surface with good ventilation. Never block the vents which will cause
malfunction resulted from overheating.
Use a soft and clean rag to clean the outside of the unit . Never clean it with chemicals or detergent.
This book is only a guide for user's operation, not a criterion for configuration.
Only use attachments/accessories specified by the manufacturer.
Where the Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.
The lightning flash is intended to alert the user to the presence of dangerous voltage within the
product's enclosure, and touching the internal components may result in a risk of electric shock
to persons.
The exclamatory mark is intended to alert the user to the presence of important operating
instructions.
CAUTIONCAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified
service personnel.
-3-
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. any Changes or modifications not expressly approved by the part y responsibl e for complia nce
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help .
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
-4-
FRONT PANEL:
Panel
Standby/ON
BT
LINE/AUX
COAX/OPT
11
22
33
66 77
44
55
88
1 STANDBY
Press to switch on the sound base; Press it again to put the sound base in standby mode.
(STANDBY--red indicator, BLUETOOTH--red and blue indicator is ready for pairing enabled device, blue indicator flahing means has
connected to the sound base.)
2 VOLUME+ (Press to turn up the volume)
3 VOLUME- (Press to turn down the volume)
4 SOURCE
Press repeatedly to switch among BLUETOOTH, LINE IN, AUX IN, ,OPTICAL IN and COAXIAL IN mode.
5 STANDBY/ON INDICATOR(STANDBY-red indicator)
6 BT INDICATOR(BLUETOOTH-blue indicator)
7 LINE/AUX INDICATOR(LINE-green indicator,AUX-red indicator)
8 COAXIAL/OPTICAL INDICATOR(COAXIAL-green indicator,OPTICAL-red indicator)
(Note: All the button on the front panel are touch keys)
-5-
REAR PANEL:
Panel
SIDE PANEL:
11
22
11
22
33
1 LINE INPUT
2 OPTICAL INPUT
3 COAXIAL DIGITAL AUDIO INPUT
4 AC INPUT
1 AUX INPUT
-6-
44
Connections
Digital Audio Input
COAXIAL
OPTICAL
Optical Input
AUX Input
Digital Audio Input
COAXIAL
OPTICAL
Optical Input
AUX Input
Digital Audio Input
COAXIAL
OPTICAL
Optical Input
This sound base has an extra group of
audio input terminals. You can input the
analogue stereo audio signals from extra
devices such as VCD, CD, VCR, DVD
player, etc.
Use the audio cable to connect the stereo
audio output terminals of a VCD, CD,
VCR,DVD player to the stereo input
terminals AUX IN/LINE IN of this sound
base.
Its corresponding signal source is AUX
IN/LINE IN which can be available by
pressing [AUX]/[LINE] on the remote
control.
Coaxial Digital Audio
Use a coaxial cable to connect the coaxial
input of this sound base to the coaxial
output of VCD, CD, VCR, DVD player .
Use the optical cable to connect the optical
input of this sound base to the optical
output of VCD, CD, VCR, DVD player.
AUX IN/LINE IN
Optical Input
Line Input
L
R
R
L
Line Output
AUDIO INPUT
AUX Input
AUX IN
AUX Output
AUDIO OUTPUT
Digital Audio Input
COAXIAL
COAXIAL
Digital Audio Output
Optical Input
OPTICAL
Optical Output
-7-
Connections
BLUETOOTH
Press standby button to power on the sound base, then
press source button to switch the corresponding bluetooth
mode, the blue indicator flashing , the sound base is in
searching bluetooth signal status,
search the bluetooth signal of the sound base, select
HSB3818 on your list, input the password 0000 if need the
password prompt, the sound base will synchronize to play
songs on your mobile phone while they connected
successfully.
The blue indicator keeps solid blue means bluetooth was
connected, d
isconnected the bluetooth on the smart phone
to switched off the bluetooth connection.
Note: Bluetooth connection range in 10 meters.
The model HSB3818 in your device was not deleted.
In bluetooth mode,[PLAY/PAUSE],[NEXT], [PREVIOUS],
[VOLUME+/-] etc. are also active.
use your smart phone to
Bluetooth
Standby/ON
BT/USB
LINE/AUX
COAX/OPT
Model:HSB3818
-8-
Remote control
Remote Control Operation
Insert the batteries into the remote control. Point the remote control at the remote sensor on the front
panel. The remote control works within a distance of about 8 metres from the sensor and within an
angle of about 30 degrees from the left and right side.
Battery Installation
Remove the battery
compartment cover on
the back of the remote
control.
Note:
Remove the battery when you do not intend to use the remote control for a long time.
Weak batteries can leak and severely damage the remote control.
The battery must not be exposed to excessive heat source, such as sunshine, fire or any other
things like that.
Be environmentally friendly and dispose of batteries according to your government regulations.
Load one AAA/1.5V battery into the
battery compartment making sure that
the battery have been inserted with the
correct polarities matching the symbols +,
- as indicated inside the battery
compartment.
Replace the cover.
-9-
Remote Control
1
2
3
4
5
6
7
9
1 STANDBY
2 BT
3 VOLUME+
10
4 PREVIOUS
5 PLAY/PAUSE
6 VOLUME7 COAXIAL
11
8 MUTE
9 LINE/AUX
10 NEXT
8
11 OPTICAL
-10-
Operation
STANDBY
LINE/AUX
MUTE
Basic Playback
Press to switch on the unit. Press it again to put the unit in standby mode.
Press to enter to bluetooth..
Press to enter to COAXIAL IN mode.
Press to enter to OPTICAL IN mode.
Press repeatedly to switch between LINE and AUX IN mode.
Press to temporarily pause a playback. Press it again to resume the playback.
Hold down this button for 3 seconds to disconnect bluetooth.
Press to skip to the next chapter/track.
Press to return to the previous chapter/track.
Press to temporarily switch off the sound . Press it again to switch it on.
Press [VOLUME+] to turn up the volume.
Press [VOLUME-] to turn down the volume.
-11-
Troubleshooting
Before resorting to maintenance service, please kindly check by yourself with the following chart.
Symptom Cause(s)
No Power
Sound
There is no sound or
the sound is
distorted.
The buttons on the
unit doesn't work.
The remote
control does not
function.
The DC power cord is not connected to the power
supply or is not connected to a power supply
securely.
The audio cables aren't connected securely.
The volume is set to the minimum level.
The sound is switched off.
The unit is being interfered with static electricity
etc.
There is no battery in the remote control.
The batteries are out of charge.
The remote control isn't pointed to the remote
sensor.
The remote control is out of its operating area.
The unit is shut down.
Please check that the DC power cord
is connected securely.
Connect the audio cables securely.
Turn up the volume.
Press [MUTE] on the remote control to
switch on the sound.
Press [PLAY/PAUSE].
Switch off and unplug the unit.
Then connect the plug to the power supply
and switch it on again.
Install one AAA/1.5V battery in it.
Replace the batteries with new ones.
Make sure that the remote control is
pointed to the remote control sensor.
Make sure the remote control is within
the operating area.
Switch off the unit and disconnect it from
the DC outlet. Then power on the unit again.
Remedy
-12-
Specifications
Power supply
Working
environment
Power output (Max)
Frequency response
Temperature
Relative humidity
AC ~100-240V,50/60Hz 20W
-10~+35
5%~90%
20WX2
3dB(20Hz~20kHz)
-13-
Loading...