SUNVALLEYTEK TT BH074 User Manual

MODEL: TT-BH074

WIRELESS STEREO EARPHONES

User Guide

IMPORTANT SAFETY INSTRUCTIONS

Thank you for choosing the TaoTronics TT-BH074 Wireless Stereo
Earphones. Please read this user manual carefully and keep it for future
reference. If you need any assistant regarding this product, please email

[e-mail] with details.

WARNINGS

• Contains small parts, which may be a choking hazard. Not suitable for
children under age 3.

• To reduce the risk of fire or electrical shock, do not expose the
product to rain or moisture.

• Do not expose this apparatus to dripping or splashing and do not
place objects filled with liquids on or near the apparatus. As with any
electronic product, use care not to spill liquids into any part of the
system. Liquids can cause a failure and/or a fire hazard.

• Do not place naked flame sources, such as lighted candles, on or near
the apparatus.

• Do not disassemble, heat above 100°C (212°F), or incinerate.

• Do not use your earphones while it is connected to the charger.

• Do not use the earphones at high volume for an extended period of
time. Doing so can cause hearing loss. Always listen at moderate
levels.

CAUTIONS:

• Make no modification to the system or accessories. Unauthorized
alterations may compromise safety, regulatory compliance, and
system performance and may void the warranty.

• Operate this product within the temperature range of -4°F to 113°F
(-20°C to 45°C) only. Damage caused by use out of the range may not
be covered by the warranty.

• Check and follow local laws regarding use of a mobile phone and
earphones/headphones while operating any vehicle or using
equipment that requires your full attention. If you use the
earphones/headphones while engaging in any such activity, be sure
to focus on safety.

PACKAGE CONTENTS

WIRELESS STEREO EARPHONES

3

MODEL: TT-BH074

User Guide

1 2

4 5

① 1 × TaoTronics Wireless Stereo Earphones (TT-BH074)
② 1 x USB Charging Cable
③ 6 x Ear Tips (two are attached to the earbuds)
④ 1 x Travel Pouch
⑤ 1 x User Manual

PRODUCT DIAGRAM LED INDICATORS

① Volume-/Previous Track
② Multifunction Button
③ Volume+/Next Track
④ USB Charging Port
⑤ Microphone
⑥ LED Indicator

BUTTON CONTROL

Function Operation Voice Prompt

Power On

Power Off Press and hold the

Pairing

Volume + / - Beep when

Next /
Previous Track

Answer /
Hang up Calls

Press and hold the
Multifunction Button until the
blue indicator lights up.

Multifunction Button until the
red indicator lights up.

When the earphone is off, press
and hold the Multifunction
Button for 6-8 seconds until the
LED indicator flashes blue and
red alternately.

Press the Multifunction Button
once

Press the Volume + / - Button
once

Press and hold the Volume + / ­Button

Press the Multifunction Button
once

Power On

Power Off

PairingBluetooth

/Play / Pause

maximum /
minimum volume is
reached

/

Ring tone for
incoming calls
Beep when answer
/ hang up

Reject Calls

Mute Calls During the calls, press the

Redial

Paired

Note:

The earphones automatically turn off when:

• No connection for 10 minutes

• Battery voltage under 3.2V

• Connecting with charging cable

Press and hold the
Multifunction Button for 1-2
seconds

Volume + and Volume –
Buttons simultaneously to
mute or unmute

Press the Multifunction Button
twice

/ ConnectedSuccessfully

Beep

/

BeepLast Number

LED Indicator Status

Red (Solid)

Blue (Solid)

Blue and Red (Flashing)

Blue (Flashes every 5s)

Blue (Flashes every 0.5s)

Red (Flashes every 5s)

HOW TO WEAR

Please wear the earphones as shown below:

1) Choose the tips that fit you best, and attach them onto the
earphones.

2) Wear the earphones and the hooks on your ears and adjust for the
best fit.

Charging

Fully charged

In Pairing mode

Paired with a Bluetooth® device

Not paired with any Bluetooth® devices

Battery low

www.taotronics.com

ASIA PACIFIC

E-mail: [e-mail](JP)
JP Importer: 株式会社SUNVALLEY JAPAN
Address: 〒104-0032 東京都中央区八丁堀3丁目18-6 PMO京橋東9F

EUROPE

E-mail:
[e-mail](UK)
[e-mail](DE)
[e-mail](FR)
[e-mail](ES)
[e-mail](IT)
EU Importer: ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

NORTH AMERICA

E-mail: [e-mail](US)
[e-mail](CA)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538

MANUFACTURER

Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129

Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/downloads-TT-BH074-CE-Cert.html

MADE IN CHINA

TT-BH074_V1.1 EN

Note:

• Please note the “L” and “R” marks on the earphone.

• Three pairs of different-sized ear tips are included (including one
pair on the earphone itself).

USE YOUR EARPHONES

1. Charging

1) Connect the charging port with any USB charging adapter or active
computer USB port.

2) Charging will start automatically with the LED indicator turning solid
red.

3) Once fully charged, the LED indicator will turn solid blue.

Note:

• Charge the earphones at least once every 6 months when not using
for a long time.

• Make sure the battery is fully charged before putting the earphones
away for storage.

2. Initial Pairing

1) Make sure the earphones and your Bluetooth® device are next to
each other (within 3 feet / 1 meter).

2) Press and hold the Multifunction Button for 6-8 seconds to bring the
earphones into pairing mode with the LED indicator flashing blue
and red alternately.

3) Activate Bluetooth® feature on your phone and search for nearby
Bluetooth® connections.

4) Find “TaoTronics TT-BH074” in the search results. Tap the name to
connect. Once connected, the LED indicator will flash blue once
every 5 seconds with a warning tone "Connected".

Note:

• Automatic Re-pairing: The Bluetooth® earphones can remember
the devices paired previously, and will attempt to pair with the last
connected device (with Bluetooth® feature activated) automatically
without going into pairing mode.

3. Clear Pairing History

1) If the earphones fail to pair with your Bluetooth® device, clear the
pairing history by pressing and holding the Volume + and Volume ­ Buttons simultaneously when the earphones are on until the LED
indicator flashes purple twice indicating clearing successfully. Then
re-pair your Bluetooth® device as instructed in Pairing.

2) If you want to pair the earphones with another device when already
paired, deactivate the Bluetooth® feature on the paired device or
remove “TaoTronics TT-BH074” from the Bluetooth list.

TROUBLESHOOTING

Problem Solutions

Fail to turn on the
earphones

Fail to charge the
earphones

Fail to pair with your
Bluetooth® device

Cannot hear any music
from the earphone after
connecting with your
Bluetooth® device

No sound in one of the
earphones

• Make sure the earphones have enough
power.

• Charge the earphones.

• Check if the charging port is damaged

• Charge using a new charging cable

• Make sure both the earphones and your
device are turned on and the Bluetooth®
feature on your device is activated.

• Make sure the earphones and your
device are next to each other or within 3
feet.

• Closely follow the instructions in the
“Pairing” section.

• Try to reboot your device.

• Make sure the music volume is at an
audible level on both your device and
earphone.

• Make sure your device is playing music

• Make sure the channel setting on your
device is correct.

What you hear on the
earphone is not clear

What the other person
hears is not clear

A call disconnects
unexpectedly

• During a call, adjust the volume on your
device or on the earphone by pressing
Volume + / –.

• Check the signal strength of your device.

• Make sure the device is within 33 feet (10
meters) of the earphone.

• Clean the wire mesh under the tip.

• Move your device closer to the earphone.

• Make sure your device is not near other
wireless devices.

• Check the signal strength of your device.

• Try to reboot your device.

• Make sure the earphone is turned on and
has enough power.

• Make sure the device is within 33 feet
(10 meters) of the earphone.

• Check the signal strength of your device
and make sure the battery is sufficiently
charged.

CARE AND MAINTENANCE

Battery care

• Be sure to turn off the earphones when it is not in use.

• Charge the earphones at least once every 6 months when not using
for a long time.

• Make sure the battery is fully charged before putting the earphones
away for storage.

To clean the earphones

Use a soft, dry cloth to wipe the surface carefully. Do not use liquids or
sprays.

To clean the tip

Gently peel the tip from the end of the earpiece. Wash the tip with mild
soap and rinse. Dry with a soft cloth. Be sure the tip is completely dry
before reattaching to the earphones.

To clean the wire mesh under the tip

Gently peel the tip from the end of the earpiece. Lightly brush the mesh
screen with a soft, dry cloth. Avoid pressing on the mesh, which could
push debris through the mesh and into the earphones.

WARRANTY

TaoTronics headphones are covered by Taotronics parts and labor
warranty for 12 months from the date of its original purchase. If any
problem occurs, please contact us by email at [e-mail].
We will instruct you on how to return the defective unit back to us for
repair and replacement.
We only provide warranty cover for products purchased from TaoTronics
or TaoTronics authorized retailers and distributors. If you have purchased
your unit from a different seller, please contact your seller directly for
warranty cover and post-sales services.

EN The Bluetooth® word mark and logos are

SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is

under license. Other trademarks and trade names are those of their

respective owners.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party

registered trademarks owned by the Bluetooth

responsible for compliance could void the user's authority to operate

the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and(2) this device must

accept any interference received, including interference that may cause

undesired operation.

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic

Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the

product and its electronic accessories should not be disposed of with

other household waste at the end of their working life. To prevent

possible harm to the environment or human health from uncontrolled

waste disposal, please separate these items from other types of waste

and recycle them responsibly to promote the sustainable reuse of

material resources. Household users should contact either the retailer

where they purchased this product, or their local government office, for

details of where and how they can take these items for environmentally

safe recycling. Business users should contact their supplier and check

the terms and conditions of the purchase contract. This product and its

electronic accessories should not be mixed with other commercial

wastes for disposal.