SUNVALLEYTEK RP WD007 User Manual

RP-WD007

www.ravpower.com

NORTH AMERICA

E-mail : support@ravpower.com(US) support.ca@ravpower.com(CA) Tel : 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST) Address: 46724 Lakeview Blvd, Fremont, CA 94538

EUROPE

E-mail: support.uk@ravpower.com(UK) support.de@ravpower.com(DE) support.fr@ravpower.com(FR) support.es@ravpower.com(ES) support.it@ravpower.com(IT) EU Importer: ZBT International Trading GmbH, Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

ASIA PACIFIC

E-mail : support.jp@ravpower.com(JP)

Manufacturer

Shenzhen NearbyExpress Technology Development Co., Ltd. Address: 333 Bulong Road, Shenzhen, China, 518129

Learn more about the EU Declaration of Conformity: https://www.ravpower.com/downloads-RP-WD007-CE-Cert.html

FILEHUB

User Guide

CONTENTS

English Deutsch

Francais Espanol Italiano

01/06 07/12

13/18 19/24

25/30

123456

Product Diagram

1. Internet-Anzeige

2. WiFi-Anzeige

3. 5G-Anzeige

4. SD-Karte-Anzeige

5. Akku-Anzeige

6. Einschaltknopf

7. USB A-Anschluss

8. USB C-Anschluss

9. Resetknopf

10. RJ45 Ethernet-Anschluss

11. WiFi-Taste

12. Steckplatz für die SD-Karte

13. SD auf USB-Backup-Taste

7 8 9

Schéma produit

1. Témoin Internet

2. Témoin WiFi

3. Témoin 5G

4. Témoin carte SD

5. Témoin de batterie

6. Bouton d’allumage

7. Port USB A

8. Port d’entrée USB C

9. Bouton réinitialisation

10. Port Ethernet RJ45

11. Bouton WiFi

12. Emplacement carte SD

13. Bouton sauvegarde SD vers USB

Product Diagram

1. Internet Indicator

2. WiFi Indicator

3. 5G Indicator

4. SD Card Indicator

5. Battery Indicator

6. Power Button

7. USB A Port

12 13

SD USB

8. USB C Input Port

9. Reset Button

10. RJ45 Ethernet Port

11. WiFi Button

12. SD Card Slot

13. SD to USB Backup Button

Diagrama del Producto

1. Indicador de Internet

2. Indicador Wi-Fi

3. Indicador 5G

4. Indicador de Tarjeta SD

5. Indicador de Batería

6. Botón de Encendido

7. Puerto USB A

8. Puerto de Entrada USB C

9. Botón de Reinicio

10. Puerto Ethernet RJ45

11. Botón de Wi-Fi

12. Ranura para Tarjetas SD

13. Botón de Copia de Seguridad a SD o USB

Diagrama del Prodotto

1. Indicatore Internet

2. Indicatore WiFi

3. Indicatore 5G

4. Indicatore Scheda SD

5. Indicatore Batteria

6. Pulsante di Accensione

7. Porta USB A

8. Porta in ingresso USB C

9. Pulsante Reset

10. Porta Ethernet RJ45

11. Pulsante WiFi

12. Slot per Scheda SD

13. Pulsante per Backup da Scheda SD a USB

Specif ications

CPU Operating System Battery Capacity Play Time

MTK MT7628AN+MT7610E iOS, Android, Windows, macOS 5200 mAh Li-ion

2.4G: 8.4 hours 5G: 6 hours

Battary Indicator

Turns on white Turns on red Fast ashes red Blinks every 2 seconds Blinks every 0.5 second

Work Status

≥ 30% < 30%

< 10% Charging Shutting down

Operating Temperature

Instructions

LED Indicators

Internet Indicator

Turns on white Turns o

WiFi Indicator

Flashes Stops ashing Turns solid

5G Indicator

Turns on

SD Card Indicator

Turns on white Flashes white Turns red

5°C – 35°C / 41°F – 95 °F

Work Status

Connected to interent Disconnected from internet

Work Status

Initiating Connecting Connected to WiFi

Work Status

5G WiFi connected

Work Status

SD card inserted SD card reading or writing Unable to back up or error

Button Controls

Power Button Press to turn on / o the FileHub Reset Button

WiFi Mode Button

Backup Button

SD Card Slot USB C Port

USB A Port

Press and hold for 5 seconds to resume factory setting

Press and hold for 3 seconds to cycle throgh

2.4GHz / 5GHz / 5GHz & 2.4GHz WiFi modes Press the Backup Button to start copying and

backing up data from the SD card to USB HDD Support up to 2TB SDXC

Charge the FileHub Data transfer with USB C devices

Support USB ash and HDD drive data transfer (FAT32, exFAT, NTFS) Provide 1A output current to compatible devices

Accessing Network Attached Storage (NAS)

1. Download “RAV FileHub” app from Apple App Store or Google Play. Access our website www.ravpower.com to download if you are using a Windows or macOS computer.

2. Insert the USB ash drive, external HDD, or any USB storage devices into the USB port, or the SD card into the SD slot, to create a NAS.

3. Press and hold the Power Button for 3 seconds to turn on the FileHub.

4. Turn on the wireless connection and search for available network on your host device. Find ”FileHubPlus-XXXX” in the Wi-Fi list.

5. Connect to the “FileHubPlus-XXXX” network using default password 11111111 (8 x 1s).

6. Run the RAV FileHub App to access the storage wirelessly. 01/02

Note: The FileHub does not support smartphone, tablet, or camera used as USB storage.

Conguring your FileHub (AP / Router / Bridge)

Access Point (AP) Mode

In AP mode, the FileHub is connected to a wired network and other device can connect to the FileHub (and access the wired network) via its Wi-Fi connection.

Conf iguration

1. Turn on the FileHub.

2. Connect the FileHub to router or existing wired network.

3. Wait for the Wi-Fi LED to turn white.

4. Now the FileHub has become an AP and a new connection named “FileHubPlus-XXXX” will show in the list of Wi-Fi networks. Connect your devices to it (default password 11111111).

Router Mode

In this mode, the FileHub is connected to digital subscriber line (DSL) modem or cable modem and works as a regular router.

Conf iguration

1. Connect the FileHub to DSL Modem and turn on the FileHub.

2. Ensure your device (PC/ Smartphone / Tablet) is connected to

FileHub Wi-Fi already (follow the previous instructions).

3. Access: 10.10.10.254 via your web browser

(IE, Firefox, Safari, or an alternative browser).

4. Login with user name: “admin” (all lower case) and no password

(leave the password eld blank).

Turn on the Wi-Fi of your device

assword 11111111

Connected already

Username: admin

Password: leave it blank

5. Click “Network Settings” > “Internet” > “Wired Access”, where it

will show Dynamic IP, Static IP, PPPoE for router setup. Please consult your network administrator or refer to the user documentation of your network to check which one to select.

03/04

Choose the way to congure the

router mode

Bridge Mode

*Sta c IP/ Dynamic IP/ PPPoE? When you use your DSL or cable modem without the router, how does it work?

c IP: It requires you to go into the

Sta TCP/IP se and DNS se Dynamic IP: No IP address or DNS se PPPoE: It requires you to specify the username and password assigned by your ISP.

ng and specify the IP address

ng.

ngs are required to assign.

3. FileHub shall then broadcast the connection into a dierent SSID called FileHubPlus-xxxx.

In bridge mode, FileHub can create a secured Wi-Fi with a new SSID based on an existing wireless network.

NOTE: Setting your FileHub to Bridge Mode will disable all its router capabilities and turn it into an access point. It will cease to act as a DHCP server.

Conf iguration

1. Open the FileHub Login and Admin Page (Refer to Steps 1-5 from Previous section “Router mode”)

2. Go to “Network Settings” > “Internet” > “Wireless Access” to create the connection between your FileHub and your existing wireless Internet.

Use FileHub as a Power Bank

Use FileHub as a power bank to charge your mobile device by simply connecting it to your devices via USB charging cable. Check the remaining battery level by pressing the Power Button.

05/06

Spezif ikationen

CPU Betriebssystem Akkukapazität Betriebszeit

Betriebstemperatur

Anleitungen

LED-Anzeigen

Internet-Anzeige

Leuchtet weiß Leuchtet nicht

WiFi-Anzeige

Blinkt Blinken aufhaltet konstant leuchtet

MTK MT7628AN+MT7610E iOS, Android, Windows, MacOS 5200 mAh Li-ion 2,4 G: 8,4 Stunden

5 G: 6 Stunden 5°C – 35°C / 41°F – 95 °F

Status

mit Internet verbunden nicht mit Internet verbunden

Status

Starten Verbinden Mit WiFi verbunden

Akku-Anzeige

Leuchtet weiß Leuchtet rot Blinkt schnell rot Blinkt alle 2 Sekunden Blinkt alle 0,5 Sekunden

Status

≥ 30% < 30%

< 10% Wird aufgeladen Wird heruntergefahren

Bedientasten

Einschaltknopf Drücken, um den FileHub ein-/auszuschalten Resetknopf

WiFi Modustaste

Backup-Taste

SD-Karte-Slot USB C-Anschluss

USB A-Anschluss

5 Sekunden gedrückt halten, um Standardeinstellungen wiederherzustellen

3 Sekunden gedrückt halten, um 2,4 GHz / 5 GHz / 5 GHz & 2,4 GHz WiFi Modus auszuwählen

Backup-Taste drücken, um Daten von der SDKarte auf USB HDD zu kopieren und zu sichern

Unterstützt bis zu 2 TB SDXC Zum Auaden des FileHubs

Datentransfer mit USB C-Geräten Unterstützt USB-Sticks und HDD-Festplatten

Datentransfer (FAT32, exFAT, NTFS) Bietet 1A Ausgangsstrom für kompatible Geräte

5G-Anzeige

Leuchtet 5G WiFi verbunden

SD-Karten-Anzeige

Leuchtet weiß Blinkt weiß Wird rot

Status

SD-Karte eingesteckt SD-Karte wird gelesen oder beschrieben Kann nicht speichern oder es Fehler gibt

Network Attached Storage (NAS) nutzen

1. Laden Sie die „RAV FileHub“ aus dem Apple App Store oder von

Google Play herunter. Besuchen Sie unsere Website, www.ravpower.com, wenn Sie einen Windows oder MacOS Computer benutzen, um Software herunterzuladen.

2. Stecken Sie den USB-Stick, die externe HDD-Festplatte oder

andere USB-Speichergeräte in den USB-Anschluss oder die Stecken Sie SD-Karte in den SD-Steckplatz, um ein NAS einzurichten.

3. Halten Sie den Einschaltknopf für 3 Sekunden gedrückt, um den

FileHub einzuschalten.

4. Schalten Sie die Wireless-Verbindung ein und suchen Sie nach

verfügbaren Netzwerken auf Ihrem Host-Gerät. Sie sollten “FileHubPlus-XXXX“ in der Wi-Fi-Liste nden.

07/08

5. Verbinden Sie Ihr Gerät mit “FileHubPlus-XXXX“ mit dem defaulten Passwort 11111111 (8 x 1).

6. Starten Sie die RAV FileHub, um auf den Speicher kabellos zuzugreifen.

Achtung: Der FileHub unterstützt keine Smartphones, Tablets oder Kameras, die als USB-Speicher benutzt werden.

Ihren FileHub kongurieren (AP / Router / Bridge)

Access Point (AP) Modus

Im AP-Modus ist der FileHub mit einem Netzwerk per Kabel verbunden und andere Geräte können auf den FileHub über die Wi-Fi-Verbindung zugreifen (und das verkabelte Netzwerk mitnutzen).

Connected already

Turn on the Wi-Fi of your device

assword 11111111

Router Modus

In diesem Modus ist der FileHub mit einem digitalen Subscriber Line-Modem (DSL) oder einem Kabelmodem verbunden und funktioniert wie ein normaler Router.

Konguration

1. Schalten Sie den FileHub ein

2. Verbinden Sie den FileHub mit dem Router oder einem bestehenden Netzwerk

3. Warten Sie, bis die Wi-Fi LED-Anzeige weiß wird

4. Jetzt ist der FileHub zum AP geworden und eine neue Verbindung mit dem Namen „FileHubPlus-XXXX” wird in der Liste der Wi-Fi Netzwerke aufgeführt. Verbinden Sie Ihre Geräte mit diesem Netzwerk (voreingestelltes Passwort: 11111111).

Konf iguration

1. Verbinden Sie den FileHub mit einem DSL Modem und schalten

Sie den FileHub an.

2. Stellen Sie sicher, dass Ihr Gerät (PC/ Smartphone / Tablet) bereits

mit dem FileHub per Wi-Fi verbunden ist (entsprechend der obigen Anleitung).

09/10

3. Zugang: 10.10.10.254 über Ihren Webbrowser (IE, Firefox, Safari oder ein anderer Browser)

4. Melden Sie sich mit dem Benutzernamen: “admin“ (alles kleingeschrieben) und ohne Passwort (lassen Sie das Passwortfeld leer) an.

ACHTUNG: Wenn Sie bei Ihrem FileHub den Bridge-Modus aktivieren, werden alle Routerfunktionen ausgesetzt und es wird zu einem Access Point. Der Hub funktioniert dann nicht mehr als DHCP Server.

Konf iguration

Username: admin

Password: leave it blank

5. Klicken Sie auf „Network Settings“ > „Internet” > „Wired Access”. Dort sehen Sie Dynamic IP, Static IP, PPPoE für die Router Einstellungen. Bitte fragen Sie Ihren Netzwerkadmin oder schauen Sie in der Dokumentation Ihres Netzwerks nach, welches für Sie am besten ist.

*Sta c IP/ Dynamic IP/ PPPoE? When you use your DSL or cable modem without the router, how does it work? Sta

c IP: It requires you to go into the

Choose the way to congure the

router mode

TCP/IP se and DNS se Dynamic IP: No IP address or DNS se PPPoE: It requires you to specify the username and password assigned by your ISP.

ng and specify the IP address

ng.

ngs are required to assign.

Bridge Modus

Im Bridge-Modus kann der FileHub ein sicheres Wi-Fi mit einer neuen SSID auf Basis eines bestehenden Wireless-Netzwerkes erstellen.

1. Önen Sie die FileHub Anmeldungs- und Admin-Seite (siehen Sie

die Schritte 1-5 aus der Sektion „Router Modus”)

2. Gehen Sie zu „Network Settings” > „Internet” > „Wireless Access”,

um eine Verbindung zwischen Ihrem FileHub und Ihrem bestehenden wireless Internet herzustellen.

3. FileHub wird die Verbindung dann an ein anderes SSID namens

FileHubPlus-xxxx senden.

FileHub als externe Batterie nutzen

Nutzen Sie FileHub als externe Batterie, indem Sie einfach Ihre Geräte über USB-Ladekabel mit dem Gerät verbinden. Überprüfen Sie den verbleibenden Akkustand, indem Sie auf den Einschaltknopf drücken.

11/12

Spécif ications

CPU Système d’exploitation Capacité de batterie Temps de lecture

Température de fonctionnement

MTK MT7628AN+MT7610E iOS, Android, Windows, macOS 5200 mAh Li-ion

2.4G: 8.4 heures 5G: 6 heures

5°C – 35°C / 41°F – 95 °F

Instructions

Témoins LED

Témoin Internet

S’allume en blanc Connecté à internet

Statut

Déconnecté d’internetS’éteint

Témoin de batterie Statut

S’allume en blanc ≥ 30% S’allume en rouge Clignotement rapide rouge Clignote toutes les 2 secondes Clignote toutes les 0,5 secondes

< 30%

< 10% En charge Extinction

Boutons de commande

Bouton d’allumage Appuyez pour allumer / éteindre le hub Bouton de

réinitialisation Bouton de mode

WiFi

Bouton de sauvegarde

Appuyez et maintenez 5 secondes pour retourner aux réglages d’usine

Appuyez et maintenez pendant 3 secondes pour basculer entre les modes WiFi 2.4GHz / 5GHz / 5GHz & 2.4GHz

Appuyez sur le bouton sauvegarde pour commencer à copier et sauvegarder vos données de la carte SD au disque USB

Témoin WiFi Statut

Clignote Initialisation Ne clignote plus S’allume f ixe

Témoin 5G

S’allume WiFi 5G connecté

Témoin carte SD Statut

S’allume en blanc Carte SD insérée Clignote en blanc S’allume en rouge

Connexion Connecté au WiFi

Statut

Lecture ou écriture de la carte SD Impossible de sauvegarder ou erreur

Emplacement carte SD Port USB C

Port USB A

Supporte les cartes SDXC jusqu’à 2TB Charger le hub

Transfert de données avec appareils USB C Supporte les disques USB ash et disques durs

HDD pour les transferts (FAT32, exFAT, NTFS) Fournit un courant 1A de sortie aux appareils compatibles

Accès au stockage en ligne (NAS)

1. Téléchargez “RAV FileHub App” de l’App Store Apple ou Google

Play. Rendez-vous sur notre site www.ravpower.com pour télécharger si vous utilisez un ordinateur Windows ou macOS.

2. Insérez un disque ash USB, disque dur externe ou tout stockage

USB, ou une carte SD dans l’emplacement SD, pour créer un NAS.

3. Appuyez et maintenez le bouton d’allumage pendant 3 secondes

pour allumer le FileHub.

4. Activez la connexion sans f il et recherchez les réseaux sur votre

appareil. Trouvez ”FileHubPlus-XXXX” dans la liste des réseaux WiFi.

13/14

5. Connectez-vous au réseau “FileHubPlus-XXXX” avec le mot de passe par défaut 11111111 (8 x 1).

6. Lancez l’application FileHub pour accéder au stockage à distance.

Note: Le hub ne permet pas d’utiliser un smartphone, une tablette ou un appareil photo comme stockage USB.

Conf igurer votre FileHub (AP / Routeur / Bridge)

Mode Point d’accès (AP)

En mode AP, le Hub est connecté au réseau laire et d’autres appareils peuvent s’y connecter (et accéder au réseau laire) via sa connexion Wi-Fi.

Connected already

Turn on the Wi-Fi of your device

assword 11111111

Mode Routeur

Dans ce mode, le FileHub est connecté à un modem DSL ou un modem câble et fonctionne comme un routeur classique.

Conf iguration

1. Allumez le FileHub

2. Connectez le FileHub au routeur ou au réseau laire existant

3. Attendez que la LED Wi-Fi devienne blanche

4. Le FileHub est maintenant un Point d’accès et la nouvelle connexion nommée “FileHubPlus-XXXX” s’achera dans la liste des réseaux Wi-Fi. Connectez-y vos appareils (mot de passe par défaut 11111111).

Conf iguration:

1. Connectez le FileHub au modem DSL et allumez-le.

2. Assurez-vous que votre appareil (PC/Smartphone/Tablette) est

connecté au Wi-Fi du Filehub (consignes précédentes).

3. Accédez à: 10.10.10.254 dans votre navigateur

(IE, Firefox, Safari, ou autre)

4. Connectez-vous avec le nom d’utilisation: “admin” (minuscules)

et sans mot de passe (laisser le champ vide)

15/16

Username: admin

Password: leave it blank

5. Cliquez sur “Réglages réseau” > “Internet” > “Accès laire”, où vous trouverez IP Dynamique, IP Statique, PPPoE pour la conguration du routeur. Veuillez consulter votre administrateur réseau ou vous référer à la documentation de votre réseau pour savoir quels paramètres sélectionner.

*Sta c IP/ Dynamic IP/ PPPoE? When you use your DSL or cable modem without the router, how does it work?

c IP: It requires you to go into the

Sta

Choose the way to congure

the

router mode

TCP/IP se

and DNS se

Dynamic IP: No IP address or DNS

PPPoE: It requires you to specify the

username and password assigned by

your ISP.

ng and specify the IP address

ng.

ngs are required to assign.

Conf iguration:

1. Ouvrez la page de connexion et d’administration du FileHub (Voir étapes 1-5 de la section “Mode Routeur” précédente)

2. Allez dans “Réglages réseau” > “Internet” > “Accès sans l” pour créer une connexion entre votre FileHub et votre réseau sans f il Internet existant.

3. Le FileHub diusera alors la connexion sur un SSID diérent appelé FileHubPlus-xxxx.

Mode Bridge

En mode bridge, le FileHub peut créer une connexion Wi-Fi sécurisée avec un nouveau SSID basée sur un réseau sans l existant.

NOTE: Régler votre FileHub en mode Bridge désactivera toutes ses capacités en tant que routeur et le transformera en point d’accès. Il arrêtera d’agir comme un serveur DHCP.

Utiliser le FileHub comme un Power Bank

Vous pouvez vous servir du FileHub comme une batterie externe en branchant votre appareil mobile à votre hub via son câble USB de charge. Consultez le niveau de batterie restante en appuyant sur le bouton d’allumage.

17/18

Especif icaciones

CPU Sistema Operativo Capacidad de la Batería Tiempo de Reproducción

Temperatura de Operación

MTK MT7628AN+MT7610E iOS, Android, Windows, Mac OS 5200 mAh Li-ion

2.4G: 8.4 horas 5G: 6 horas

5°C - 35°C / 41°F - 95°F

Instrucciones

Indicadores LED

Indicador de Internet

Se ilumina blanco Conectado al internet

Estado de Trabajo

Desconectado del internetSe apaga

Indicador de la Batería

Se ilumina en blanco Se ilumina en rojo Rápidamente parpadea en rojo Parpadea cada 2 segundos Parpadea cada 0.5 segundos

Estado de Trabajo

≥ 30% < 30%

< 10% Cargando Apagando

Controles de los Botones

Botón de Encendido Presiona para encender/apagar el FileHub Botón de Reinicio

Botón de Modo Wi-Fi

Botón de Copia de Seguridad

Manténgalo presionado durante 5 segundos para reanudar la conf iguración de fábrica

Manténgalo presionado durante 3 segundos para circular entre los modos de Wi-Fi de

2.4GHz / 5GHz / 5 GHz y 2.4 GHz Presione el botón de copia de seguridad para

crear un respaldo de los datos a una tarjeta SD o a una USB HDD

Indicador de Wi-Fi Estado de Trabajo

Parpadea Iniciando Para de parpadear Se queda iluminado

Indicador 5G

Se enciende Wi-Fi 5G conectado

Indicador de Tarjeta SD Estado de Trabajo

Se ilumina blanco Tarjeta SD insertada Parpadea blanco Se ilumina rojo

Conectando Conectado a Wi-Fi

Estado de Trabajo

Lectura o grabado de tarjeta SD No se pudo hacer una copia de

seguridad o error

Ranura para Tarjetas SD Puerto USB C

Puerto USB A

Soporta hasta 2TB SDXC Cargue el FileHub

Transferencia de datos con dispositivos USB C Soporta transferencia de datos a una Memoria

ash USB o a un disco duro ( FAT32 , exFAT, NTFS ) Proporciona una corriente de salida de 1A a los dispositivos compatibles

Acceso al Almacenamiento Conectado a la Red (NAS)

1. Descargue la "Aplicación RAV FileHub " del Apple App Store o del Google Play Store. Acceda a nuestro sitio web www.ravpower.com para descargarla si está usando una computadora Windows o Mac OS .

2. Inserte una unidad ash USB, disco duro externo o cualquier dispositivo de almacenamiento USB en el puerto USB, o una tarjeta SD en la ranura SD, para crear un NAS.

3. Mantenga presionado el Botón de Encendido por 3 segundos para encender el concentrador (FileHub).

4. Encienda la conexión inalámbrica y busque la red disponible en su dispositivo central. Encuentre "FileHubPlus-XXXX" en la lista de conexiones Wi-Fi.

19/20

5. Conéctese a la red "FileHubPlus-XXXX" utilizando la contraseña de fabrica 11111111 (8 unos).

6. Ejecute la aplicación RAV FileHub para acceder al almacenamiento de forma inalámbrica.

Nota: El concentrador (FileHub) no es compatible con Smartphone, tabletas o cámaras utilizadas como almacenamiento USB.

Conf igurando su Concentrador (FileHub) (AP/ Router / Puente de Red)

Modo de Punto de Acceso (AP)

En modo AP, el FileHub está conectado a una red cableada y otro dispositivo puede conectarse al FileHub (y acceder a la red cableada) a través de su conexión Wi-Fi.

Turn on the Wi-Fi of your device

assword 11111111

Connected already

Modo Enrutador

En este modo, el concentrador está conectado al módem de línea de abonado digital (DSL) o cable módem y funciona como un enrutador normal.

Conf iguración:

1. Encienda el FileHub.

2. Conecte el FileHub al router o a la red cableada existente.

3. Espere a que el LED se ilumine blanco.

4. Ahora el FileHub se ha convertido en un AP y una nueva conexión llamada " FileHubPlus-XXXX " aparecerá en la lista de redes Wi-Fi. Conecte sus dispositivos a ella (contraseña de fabrica 11111111).

Conf iguración

1. Conecte el FileHub al DSL Modern y enciéndalo.

2. Asegúrese de que su dispositivo (PC / Smartphone / Tablet) ya esté conectado al Wi-FI del FileHub (siga las instrucciones anteriores) .

3. Entre a: 10.10.10.254 a través de su navegador web (IE, Firefox, Safari, o un navegador alternativo)

4. Inicie sesión con el nombre de usuario: "admin" (en minúsculas) y sin contraseña (deja el campo de contraseña en blanco)

21/22

Username: admin

Password: leave it blank

5. Haga clic en " Conguración de Red " > " Internet " > " Acceso Alámbrico " , donde se mostrará IP dinámica, IP estática, PPPoE para la conguración del enrutador. Por favor consulte a su administrador de red o consulte la documentación de usuario de su red para vericar cuál seleccionar.

*Sta c IP/ Dynamic IP/ PPPoE?

When you use your DSL or cable modem

without the router, how does it work?

c IP: I t requires you to go into the

Sta

Choose the way to congure the

router mode

TCP/IP se

and DNS se

Dynamic IP: No IP address or DNS

PPPoE: It requires you to specify the

username and password assigned by

your ISP.

ng and specify the IP address

ng.

ngs are required to assign.

Conf iguración

1. Abra la página FileHub de Iniciar Sesión y Admin (consulte los pasos 1-5 de la sección anterior " Modo enrutador " )

2. Vaya a " Conguración de Red " > " Internet " > " Acceso Inalámbrico " para crear la conexión entre su FileHub y su Internet inalámbrico existente .

3. El concentrador (FileHub) luego transmitirá la conexión a un diferente SSID llamado FileHubPlus-xxxx.

Modo Puente

En modo puente, el concentrador (FileHub) puede crear una red de Wi-Fi segura con un nuevo SSID basado en una red inalámbrica existente.

NOTA: Congurando su FileHub al Modo Puente deshabilitará todas las capacidades como enrutador y lo convertirá en un punto de acceso. Dejará de actuar como un servidor DHCP.

Use el Concentrador (FileHub) como un Banco de Energía

Use FileHub como un banco de energía para cargar su dispositivo móvil simplemente conectándolo a sus dispositivos a través de un cable de carga USB. Revise el nivel de batería restante presionando el Botón de Encendido.

23/24

Specif iche

CPU Sistemi Operativi Capacità della Batteria Tempo di Riproduzione

MTK MT7628AN+MT7610E iOS, Android, Windows, macOS 5200 mAh agli Ioni di Litio

2.4G: 8,4 ore 5G: 6 ore

Indicatore Batteria

Bianco Rosso Rosso Lampeggiante (veloce) Lampeggia ogni 2 secondi Lampeggia ogni 0,5 secondi

Condizione

≥ 30% < 30%

< 10% In carica Spegnimento in corso

Temperatura di Esercizio

Istruzioni

Indicatori LED

Indicatore Internet

Bianco Spento

Indicatore WiFi

Lampeggiante Smette di lampeggiare Luce ssa

Indicatore 5G

Acceso

5°C – 35°C / 41°F – 95 °F

Condizione

Connesso ad interent Disconnesso da internet

Condizione

Inizializzazione Connessione Connesso al WiFi

Condizione

Connesso al WiFi 5G

Pulsanti di Controllo

Pulsante di Accensione Premere per accendere / spegnere FileHub Pulsante Reset

Pulsante Modalità WiFi

Pulsante Backup

Slot per scheda SD Porta USB C

Porta USB A

Premere e tenere premuto per 5 secondi per riportare alle impostazioni di fabbrica

Premere e tenere premuto per 3 secondi per passare tra le modalità WiFi 2.4GHz / 5GHz / 5GHz e 2.4GHz

Premere il Pulsante Backup per iniziare a copiare e a fare il backup dei dati dalla scheda SD all’HDD USB

Supporta SDXC no a 2TB Ricarica FileHub

Trasferimento dati con dispositivi USB C Supporta unità ash USB e trasferimento dati

per dischi HDD (FAT32, exFAT, NTFS) Fornisce una corrente in uscita di 1A ai dispositivi compatibili

Accesso ad unità NAS (Network Attached Storage)

Indicatore Scheda SD

Bianco f isso Bianco lampeggiante Rosso

Condizione

Scheda SD inserita Lettura o scrittura scheda SD Impossibile eettuare il

backup o errore

1. Scaricare “"RAV FileHub App” dall’Apple App Store o da Google Play. Accedere al nostro sito web www.ravpower.com per scaricare se si sta usando un computer Windows o macOS.

2. Inserire l’unità ash USB, l’HDD esterno o qualsiasi altro dispositivo external HDD nella porta USB port, o la scheda SD nello slot SD slot per creare un’unità NAS.

3. Premere e tenere premuto il Pulsante Accensione per 3 secondi per accendere FileHub.

25/26

4. Accendere la connessione wireless e cercare le reti disponibili sul proprio dispositivo host. Trovare “FileHubPlus-XXXX” nella lista delle WiFi disponibili.

5. Collegarsi alla rete “FileHubPlus-XXXX” utilizzando la password di default 11111111 (8 volte 1).

6. Far partire l’App RAV FileHub per accedere all’unità in modalità wireless.

Nota: FileHub non supporta smartphone, tablet o fotocamere utilizzate come unità di memorizzazione USB.

Congurazione di FileHub (AP / Router / Bridge)

Modalità Access Point (AP)

Turn on the Wi-Fi of your device

assword 11111111

Connected already

In modalità AP, FileHub è connesso ad una rete cablata e l’altro dispositivo può connettersi a FileHub (ed accedere alla rete cablata) attraverso la sua connessione WiFi.

Conf igurazione

1. Accendere FileHub

2. Collegare FileHub al router o ad una rete cablata esistente

3. Attendere che il LED del WiFi diventi bianco

4. Ora FileHub è diventato un AP. Sarà presente una nuova connessione chiamata “FileHubPlus-XXXX” nella lista delle reti WiFi, ai quali potranno essere connessi i propri dispositivi (con la password di default 11111111).

Modalità Router

In questa modalità, FileHub è connesso ad una linea DSL (Digital Subscriber Line) con modem o modem cablato e funzionerà come un normale router.

Conf igurazione

1. Collegare FileHub ad un modem DSL e accendere FileHub.

2. Assicurarsi che il proprio dispositivo (PC / Smartphone / Tablet) sia già collegato al Wi-Fi di FileHub (seguire le istruzioni precedenti).

3. Accedere all’indirizzo 10.10.10.254 attraverso il proprio web browser (IE, Firefox, Safari o un browser alternativo)

4. Eettuare il login con il nome utente “admin” (tutto minuscolo) e senza password (lasciare bianco il campo password)

27/28

Username: admin

Password: leave it blank

5. Cliccare “Impostazioni di Rete” > “Internet” > “Accesso Cablato”, dove verranno mostrati IP Dinamico, IP Statico e PPPoE per il setup del router. Si prega di consultare il proprio amministratore di rete o di fare riferimento alla documentazione utente della propria rete per controllare quale selezionare.

*Sta c IP/ Dynamic IP/ PPPoE? When you use your DSL or cable modem without the router, how does it work?

c IP: I t requires you to go into the

Sta

Choose the way to congure the

router mode

TCP/IP se and DNS se Dynamic IP: No IP address or DNS se PPPoE: It requires you to specify the username and password assigned by your ISP.

ng and specify the IP address

ng.

ngs are required to assign.

Conf igurazione:

1. Aprire la pagina di Login e di Amministrazione di FileHub (fare riferimento ai punti 1-5 della precedente sezione “Modalità Router”)

2. Andare su “Impostazioni di Rete” > “Internet” > “Accesso Wireless” per creare la connessione tra FileHub e la propria connessione internet wireless.

3. FileHub potrà quindi trasmettere la connessione su un SSID diverso chiamato FileHubPlus-xxxx.

Modalità Bridge

In modalità Bridge, FileHub può creare una rete sicura WiFi con un nuovo SSID basato su un rete wireless esistente.

NOTA: Impostando FileHub in modalità Bridge, verranno disabilitate tutte le caratteristiche di router e il dispositivo verrà trasformato in un access point. Smetterà di funzionare come server DHCP.

Utilizzo di FileHub come Power Bank

E’ possibile utilizzare FileHub com power bank per ricaricare il proprio dispositivo mobile semplicemente connettendolo al proprio dispositivo con il cavo di ricarica USB. E’ possibile controllare il livello rimanente della batteria premendo il Pulsante di Accensione.

29/30

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement:

This device meets the government's requirements for exposure to radio waves. The guidelines are

based on standards that were developed by independent scientific organizations through periodic

and thorough evaluation of scientific studies. The standards include a substantial safety margin

designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC)

is 1.6 W/kg averaged over one gram of tissue for body. Device types: FileHub (FCC ID:2AFDGRP-WD007)

has also been tested against this SAR limit. SAR information on this and other pad can be viewed on-line

at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was

tested simulation typical 10mm to body. To maintain compliance with FCC RFexposure requirements, use

accessories should maintain a separation distance between the user's bodies mentioned above, the use of

belt clips, holsters and similar accessories should not contain metallic components in itsits assembly, the use

of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements,

and should be avoided.

www.ravpower.com

POWER YOUR LIFE

SUNVALLEYTEK RP WD007 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual