Page 1
FLEX Numeric Pager
USER'S MANUAL
SUN TELECOM
INTERNATIONAL
TM
Congratulations on your purchase of a Pager. Your
new pager will instantly keep you in touch with
everyone important. The pager is reliable and easy
to use as well as affordable, and provides many features
that incorporate the most advanced electronic paging
technologies. Please read this manual carefully before
using your pager for a better understanding of pager
operation.
SUN TELECOM
INTERNATIONAL
TM
Page 2
1. FEATURES
2. BUTTONS
3. ICONS AND DESCRIPTIONS
4. TURNING PAGER ON
5. TURNING PAGER OFF
6. RECEIVING AND READING MESSAGES
7. DUPLICATE MESSAGES
8. LOW BATTERY INDICATOR
9. LOCKING AND UNLOCKING MESSAGES
10. MEMORY
11. DELETING INDIVIDUAL MESSAGES
12. DELETING ALL MESSAGES
13. CHANGING ALERT STATUS
14. ALARM
15. TIME AND DATE
16. AUTOMATIC ON / OFF
17. LIGHT
18. BATTERY INFORMATION
19. CANNED MESSAGE
4
5
6
7
8
9
10
10
11
12
13
14
15
16
17
18
19
19
20
CONTENTS
User selectable 8 melodies alert
& 4 beep tone
Receiving time stamping
Alarm
Erase all
Duplicate message indication
Memory retention when power off
Low battery alarm
12 programmable 12-digit canned
messages
30 message memories
15 locked messages
Date & time display
Message full indication
Vibrator / Chirp / Silent
Selective erase
Unread message indicator
Reflective backlighting
Auto on/off timer
Time display when power off
1. FEATURES
4
FEATURES
Page 3
READ BUTTON
Read messages
Select seting and features in Function
mode
2. BUTTONS
LAMP BUTTON
Turn the light On or Off
Turn pager Off
Select Function mode
Toggling: Select desired option in field by
pressing repeatedly
FUNCTION BUTTON
Turn pager on
Enter Function mode
Complete setting process in each function
Function button
Read button
Lamp button
5
BUTTONS
3. ICONS AND DESCRIPTIONS
: Message Lock
: Duplicate Message
: New Unreaded message
: Change Battery
: Message longer than 12 Char
:
Reception Area
: Alert (Beep) On
: Alert (Melody) On
: Alert (Vibrator) On
: Alarm On
: Automatic On/Off
6
ICONS AND DESCRIPTIONS
Page 4
4. TURNING PAGER ON
< Stand by screen>
Press the function button for 2 seconds or longer
while pager is in the Off mode.
Time and date will appear on the bottom center of
the screen.
Upon inserting a battery, pager will vibrate and
beep briefly as it enters the normal reception mode.
If unread new messages are, new icon and the
number of unread messages are displayed on the
screen.
And if all messages are read, the number of
messages in memory is displayed.
< Power off mode>
7
TURNING PAGER ON
5. TURNING PAGER OFF
Press and hold the Function button for 2 seconds to
enter the Function mode.
Press the Function button repeatedly until "POWER
OFF?" is displayed on the screen.
Press Lamp button for more than 2 seconds to enter
Pager Off mode.
8
TURNING PAGER OFF
Page 5
Reading Messages with 13 Characters or More
Messages with 13 or more characters will display
" " at the top right corner of the screen.
Press the Read button to read the rest of the message.
6. RECEIVING AND READING
MESSAGES
When a message is received, the selected Alert will
be activated.
Press the Read button to stop the Alert and to read
messages.
The following information will be displayed in the
order of the newest to the oldest message:
Message number, time stamp and message.
9
RECEIVING AND READING MESSAGES
8. LOW BATTERY INDICATOR
When the battery capacity falls below the operational
level, the Low Battery icon will be displayed and the
voltage alarm tone will be activated.
Duplicate Message Indicator will be displayed
on the screen when the pager receives a message
that is identical to a message in memory.
7. DUPLICATE MESSAGES
10
DUPLICATE MESSAGES / LOW BATTERY INDICATOR
Page 6
9. LOCKING AND UNLOCKING MESSAGES
A maximum of 15 messages can be locked.
Select a message to be locked and press the Function
button.
When "LOCK?" is displayed, press the Lamp button to
lock the message. The Lock icon will be displayed, and
the message will be locked.
To unlock messages, select the message to be unlocked
and then press the Function button to display "UNLOCK?"
on the screen.
Press the Lamp button.
Locked messages will remain in memory even during low
battery power, and while the battery is being changed.
11
LOCKING AND UNLOCKING MESSAGES
10. MEMORY
Pager has the memory capacity to store 30 numeric messages,
with a maximum of 20 characters per message.
12
MEMORY
Page 7
11. DELETING INDIVIDUAL MESSAGES
To Delete Individual Messages:
After reading messages, enter into Function mode by
pressing the Function button repeatedly until "CLEAR?" is
displayed on the screen.
Press Lamp button.
Message is deleted and another message is displayed.
To Delete a Locked Message:
It is necessary to convert the locked message into
unlocked condition before the message can be deleted.
13
DELETING INDIVIDUAL MESSAGES
12. DELETING ALL MESSAGES
Deletion of All Messages:
Press and hold the Function button for 2 seconds to
enter the Function mode.
To display "Clear All?"sign, press Function Button
repeatedly.
On "Clear All?"sign, press Lamp button to delete
all message except locked messages and Unread
message.
14
DELETING ALL MESSAGES
Page 8
Press and hold the Function button for 2 seconds
to enter the Function mode.
Press the Function button repeatedly until
"ALERT?" is displayed on the screen.
Press the Lamp button repeatedly until desired
Alert is selected.
Press the Function button to complete the
process.
13. CHANGING ALERT STATUS
15
CHANGING ALERT STATUS
Press and hold the Function button for 2 seconds to enter
the Function mode.
Press the Function button repeatedly until "ALARM?" is
displayed on the screen.
Press Lamp button on "ALARM?" indicator to enter into
Alarm-setting mode.
To choose and set desired condition, press Lamp button to
toggle (Ex. YES NO).
To move to each field (hour, minute, am/pm), press the
Read button.
Press Function button to complete the process.
14. ALARM
16
ALARM
Page 9
Press and hold the Function button for 2 seconds to
enter the Function mode.
Press the Function button repeatedly until "TIME?"
indicator is displayed on the screen and press Lamp
button.
Time/Date setting process is exactly the same as Alarm
setting process.
Press the Lamp button to change the month, then press
the Read button to move to the next field.
Press the Function button to complete the process.
15. TIME AND DATE
17
TIME AND DATE
Press and hold the Function button for 2 seconds to
enter the Function mode.
Press the Function button repeatedly until "AUTOMATIC
ON-OFF?" is displayed on the screen.
Press the Lamp button on "AUTOMATIC ON-OFF?"
indicator to enter into Automatic On-Off mode.
Automatic On-Off time setting process is the same as the
Alarm setting process.
Press the Function button to complete the process.
16. AUTOMATIC ON/OFF
18
AUTOMATIC ON/OFF
Page 10
17. LIGHT
Press the Lamp button to turn the light on.
Press the Lamp button again to turn the light off.
18. BATTERY INFORMATION
The pager is designed to operate with a "AAA" size alkaline battery.
Note: Do NOT use carbon zinc batteries.
19
LIGHT / BATTERY INFORMATION
19. CANNED MESSAGE
The pager comes with 12 pre-programmed messages,
which will be displayed on the LCD when the corresponding
code is entered.
To send a canned message:
1. Dial the pager number on a telephone and
wait for a beeping sound.
2. Enter the number from 1 to 12.
3. Upon reception of a canned message, a designated melody
will be activated unless Vibrate or Silence is selected.
20
CANNED MESSAGE
Page 11
CODE
1
2
3
4
5
6
7
8
9
10
11
12
Following is a list of pre-programmed canned message.
Displayed Message
Honey
Friend
Love you
Home
Office
Congratulate
Urgent
Miss You
Good Night
Hello
Reminder
Sorry
21
CANNED MESSAGE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)this device may not cause harmful interference,
and (2)this device must accept any interference received, including
interference that may cause undesired operation.
FCC COMPLIANCE STATEMENT:
PRODUCT NAME : Numeric Pager
MODEL NUMBER : Z2F
FCC RULES : TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC
DECLARATION OF CONFORMITY
Page 12
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. if this equipment does cause
harmful interference to radio or television reception (which can be
determined by turning the equipment off and on), the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient / Relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
INFORMATION TO USER:
Caution : Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's authority
to operate this equipment.
The party responsible for product compliance
11321 Decimal Drive Louisville, KY 40299
SUN TELECOM
INTERNATIONAL
Loading...