Sun Telecom AN1000 User Manual

1. FEATURES

2. BUTTONS

3. ICONS AND DESCRIPTIONS

4. TURNING PAGER ON

5. TURNING PAGER OFF

6. RECEIVING AND READING MESSAGES

7. DUPLICATE MESSAGES

8. LOW BATTERY INDICATOR

9. LOCKING AND UNLOCKING MESSAGES

10. MEMORY

11. DELETING INDIVIDUAL MESSAGES

12. DELETING ALL MESSAGES

13. CHANGING ALERT STATUS

14. ALARM

15. TIME AND DATE

16.

17. BACKLIGHT

18. BATTERY INFORMATION

AUTOMATIC ON/OFF

4
5
6
7
8

9
10
10
11
12
13
14
15
16
17
18
19
19

30 message slots

14 locked messages

Date & time display

Message full indication

Vibe / Chirp / Silent(No alert) option

Individual Message Delete

Delete all Message

Unread message indicator

Backlight display

Automatic On/Off

Time display when power off

12 user selectable alerts

Message Time Stamp

Alarm

Duplicate message indication

Low battery alert

Message retained during battery
replacement

Read messages.
Select setting and features in Function.
Turn pager on.

READ BUTTON

Enter Function mode.

Turn the light on or off.

FUNCTION BUTTON

Press the Read Button and Function button
simultaneously to escape to the main screen.

: Reception Area

: Beep Alert On

: Melody Alert On

: Vibe Alert On

: Alarm On

: Automatic On/Off

: Message Lock

: Duplicate Message

: New Unread Message

: Low Battery

: Message Continuation

Press and hold the Read button for 2 seconds while
pager is in the Off mode.
Time and date will appear on the bottom center of the
screen.

When inserting the battery, the pager will vibrate and
beep briefly as it powers on.

If there are new unread messages, the icon will
appear. The number of unread messages will also be
displayed on the screen. If all messages are read, the
number of messages in memory will be displayed.

Press the Function button to enter the Function mode.

Press READ to turn Pager Off .

Press the Function button 2 times until "POWER
OFF?" is displayed on the screen.

Press the Read and Function buttons simultaneously
to escape to the main screen.