SUNTEC
PERFORMANCE-PROVEN FUEL UNITS
AND VALVES
...for residential and commercial applications
SUNTEC, THE INDUSTRY LEADERS z
BUILT ON OUR COMMITMENT
Knowing the industry’s need and responding to them with the right products and services is one of the
responsibilities of leadership. Over the years, Suntec has been committed to being involved, asking
questions, listening and providing answers. Today, as the industry leaders, our involvement is as
strong as ever. We still work hard to earn your trust in us as the experts in our field. You shouldn’t
have to settle for less.
MODEL A-7000 z SINGLE-STAGE FUEL UNITS
y Single-pipe installations to 6” hg. vacuum
y Two-pipe installations to 12” hg. vacuum
y Lift or gravity feed applications with 10 psi maximum
inlet/return pressure
y Choice of 1725, 2850, 3450 rpm
y Suitable for no. 2, no. 1 fuel oil, or kerosene
y Mounting in any position
y Factory-set at 100 psi
y Adjustable range 100-150 psi at 3450 rpm, 100-135 psi
at 1725 rpm. Models available to 200 and 300 psi.
I-1
SPECIFICATIONS* /ORDERING INFORMATION
Model
Number
A2VA-3006
RPM
Rotation
1
Nozzle
Port
Location
1
Strainer &
Nozzle Rating
at 100 psi
7 gphR.H.R.H.3450/2850A2YA-7743
3 gphR.H.L.H.3450A2VD-7519
Solenoid dumping fuel unit3 gphR.H.R.H.3450A2VA-7416
3 gph at 200 psi7 gphR.H.R.H.3450A2YA-7916
Solenoid dumping fuel unit3 gphR.H.R.H.3450A2YA-7430
Solenoid dumping fuel
unit .32mm hub
Waste oil application2.5/.4 gphR.H.R.H.3450/100A2RA-7710
Waste oil application2.5/2.5**gphR.H.R.H.3450/1725A2RA-7736
10-20 psi waste oil application2.5/2.5**gphR.H.R.H.3450/1725A2RA-7737
Waste oil application2.5R.H.R.H.1725A1RA-7738
30-50 psi waste oil2.5/1.5 gphR.H.R.H.3450/1725A2RA-7739
*Also apply to “-6” model numbers (shown on fuel unit).
1
For example: “7916-6,” etc.
Viewed from shaft end.
**Use gage port for rated flow @ 1725 rpm, no cut off.
Note: All ports shown in diagram are reversed for left-hand nozzle fuel units.
Special
Features
--3 gphR.H.R.H.1725A1VA-7112
--3 gphL.H.R.H.1725A1VB-7113
--3 gphL.H.L.H.1725A1VC-7114
3-bolt mtg. hub3 gphR.H.L.H.1725A1VD-7741
--7 gphR.H.R.H.1725A1YA-7912
--2.25 gphR.H.R.H.2850A2VA-7142
--3 gphR.H.R.H.3450A2VA-7116
--3 gphL.H.R.H.3450A2VB-7117
--3 gphL.H.L.H.3450A2VC-7118
I-2
Typical Model Number Nomenclature
(Model A & Model B):*
*The model number appears on the fuel unit label.
MODEL B-8000 • TWO-STAGE FUEL UNITS
y Two-pipe installations up to 17” hg. vacuum
y Lift or gravity feed applications with 10 psi
maximum inlet/return pressure
y Capacities to 7 gph, except boost pumps
y Factory-set at 100 psi
y Pressure adjustable from 100 to 150 psi at 3450
rpm, 100 to 135 psi at 1725 rpm. Models
available to 200 and 300 psi
y Choice of 1725, 2850, 3450 rpm
y Suitable for no.2, no.1 fuel oil, or kerosene
y Mounting in any position except upside down.
I-3
SPECIFICATION*/ORDERING INFORMATION
1
Strainer
& Nozzle
Rating at
100 psi
Special
Features
Model
Number
RPM
Rotation
1
Nozzle
Port
Location
3 gph at 200 psi7 gphR.H.R.H.3450B2YA-8916
3 gphR.H.R.H.3450B2VA-8416
Solenoid
dumping fuel unit
--R.H.R.H.3450B2VA-8241
Boost pump, 20
gph at 10-20 psi
*Also apply to “-8” model numbers (shown on fuel unit). For example: “8212-6,” etc.
1
Viewed from shaft end.
--3 gphR.H.R.H.1725B1VA-8212
--3 gphR.H.R.H.3450B2VA-8216
--2.25 gphR.H.R.H.2850B2VA-8242
I-4
Loading...