PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
18" FRAME WIDTH
23" FRAME HEIGHT
23" DEPTH
Designer Series, Raised Style - 18"
Single Bin Trash Drawer
18" Wide Single Bin Trash
Drawer
Item No. DE-TRD18
18" WIDTH x23" HEIGHT x23"
DEPTH (PRODUCT SIZE) 16-1/2"
WIDTH x21" HEIGHT x22" DEPTH
(CUT-OUT)
16-1/2" WIDTH
2. REMOVE DRAWERS
Product Installation
INSERT CABINET
ROD HANDLE
SOFT-CLOSING DRAWER TRACK
See SUNSTONE manufacture website for additional
product support and product tutorials:
www.sunstonemetalproducts.com
Product Dimensions Product Features
COMPONET FEATURES
A 1/16" RAISED FRAME
VISIBLE EDGE ENABLING
YOU TO PLACE TWO OR
MORE COMPONETS SIDE
BY SIDE OR ONTOP OF
ONE ANOTHER CREATING
ONE SINGLE LARGER
FUNCTIONING COMPONET
OF YOUR OWN CHOOSING
COMBINE MULTIPLE COMPONENTS TOGETHER
INTO UNLIMITED COMBINATIONS
DE-DPCF23
DE-TRD18
USE DRILL TO SECURE SCREWS
IN PLACE THROUGH HOLES
SCREW NOT
INCLUDED
USE GLOVE TO HAND SCREW
PEG-LEG DOWN TO FLOOR
BASE - USE LEVELER TO
CONFIRM ELEVATION
3. MOUNT DRAWER & LOWER LEGS
REMOVE DRAWERS IN
ORDER TO MOUNT BOX
•Pull the drawer fully
open so Levers are
visible.
•Push "DOWN" on the
right lever, and "UP" on
the left lever.
•Holding levers in place,
pull drawer toward you.
1 . INSERT COMPONET
IMPORTANT!! - ROD HANDLES ARE MOUNTED TO INSIDE OF EACH
PANEL, YOU MUST UNSCREW EACH ONE AND MOUNT ON OUTSIDE OF
DRAWER OR DOOR PANEL.
21"
HEIGHT
HAVE 22"
CLEARANCE
INSIDE DEPTH
REMOVABLE SINGLE TRASH
BIN IS INCLUDED
ISLAND WALL CUT-OUT SIZE IS
16-1/2" WIDTH BY 21" HEIGHT BY 22" DEPTH
Frame is made from 16 gauge 304 SS,
and panel's are made from 18 gauge
304 SS. Trash Bin Bracket is 18 gauge
201 SS. Handle is Solid 304 SS.
•EXTERIOR FINISH -----------------3 YEARS
•ROD HANDLES---------------------3 YEARS
•DRAWER TRACK------------------ 1 YEAR
•PEG-LEGS--------------------------- 1 YEAR
Loading...