Sunset Trading SUK1128045LS Assembly Guide

Set up instruction for the KIAN USA Chaise-Bed

1- Unpacking & Assembly

The Product comes in 2 Boxes, the Big box includes the chaise bed, the headboard panel & the RAF arm
and the small box includes the LAF arm only.

a- Unwrap all pieces
b- Screw in the legs
c- On each arm there are 2 metal brackets, consider them and then carefully slide them down to

their pair piece attached to the body of the chaise-bed

d- Connect the wireless charger power cable to the wall
e- On the headboard panel there are 2 metal brackets as well that attaches the headboard to the

chaise

2- Powering on/off

a- Find the plug-in socket on the back of the piece and make sure it is on the off position
b- Use the cable to connect it to 110-volt power outlet
c- Turn on the red-key on the socket and make sure the red light is on (if not go to

troubleshooting)

d- While sitting on the chaise push the key with forward arrow sign / reclining sign to recline and

backward arrow sign/closing

3- Troubleshooting

• If your chaise-bed has a remote control, please put the appropriate battery in it.

• If the red light on the back socket does not light up while it is in “ON” position make sure all the

connections are not loose otherwise reach us for further assistant.

• If the red light is ON and the remote does not work, check the batteries / control wire