Sun Seeker Bicycles Fat-TadCX User Manual
Fat-Tad Supplemental Owner’s Manual
Find us online at SunSeeker.Bike Revised 8/2015
CONGRATULATIONS!
Model:
Fat-Tad CX
Style:
Tadpole Trike
Frame Material:
Tig Welded Chromoly with Rear Coil Over Suspension
Fork Material:
High Tensile Steel with Integrated Suspension
Handlebar Material:
Chromoly Steel
Steering System:
Direct Linkage
Seat Type:
1-piece - Padded Base w/Alloy Frame & Full Mesh
Wheelbase:
59″ (150cm)
Overall Length:
78″ - 83-1/2″ (198-212cm)
Width:
33-1/4″ (92cm)
Bottom Bracket Height:
20"-21-1/2" (51-55cm)
Seat Height:
16-1/2″-17-3/4″ (42-45cm)
Weight:
57 lbs.
X-Seam :
37″ - 50-1/2″ (94-128cm)*
Weight Limit:
300 lbs.
Gear Inch Range:
15 - 88
Headset:
Sealed Mechanism Steel
Drive Type:
Direct 24-speed Derailleur
Pedals Type:
Platform
Crankset:
Triple Alloy 170mm 42/32/22T
Bottom Bracket:
Sealed Cartridge
Chain Type:
KMC Z-71
Front Derailleur:
Sunrace
Rear Derailleur:
Sram
FW/Cassette Range:
11-34 8 Speed
Shifters Set:
Sram
Brake Levers:
Promax Locking Linear Pull
Brake Caliper Front/Rear:
Promax Mechanical Disc / nil
Rims / Spokes:
Alloy Fat Single Wall / Stainless Steel
Tires / Size:
Fat Bike Knobby / 20x4.0
Water Bottle Cage Mounts:
2-Handlebar / 2-Seat Back
Note: Specifications subject to change without notice.
* Boom modification may be required from 37" - 40"
Congratulations and welcome to the Sun Seeker Recumbent family! You have selected one of the most comfortable and advanced recumbents on
the market. Please read this manual before riding your Sun Seeker Recumbent. In this manual you will find that we cover the basics for setting up
and understanding your new recumbent.
IMPORTANT:
This manual is only a supplement to the main Recumbent Bicycle/Tricycle Owner’s Manual.
Read it before you take the first ride on your new recumbent bicycle/tricycle, and keep it for reference.
NOTE:
This manual is not intended as a comprehensive use, service, repair or maintenance manual. Please see your dealer for all service,
repairs or maintenance. Your dealer may also be able to refer you to classes, clinics or books on bicycle use, service, repair or
maintenance.
Fat-Tad Specifications
2
Side View
Top View
Fat-Tad Reference Views
3
Fat-Tad Assembly Reference
FAT-TAD PARTS LIST
ITEM
DESCRIPTION
QUANTITY
1
Main Frame
1
2
Crank Boom Assembly
1
3
Right Front Wheel Assembly
1
4
Left Front Wheel Assembly
1
5
Rear Wheel Assembly
1
6
Quick Release for Rear Wheel (Not Pictured Above)
1
7
Headset Seal
4
8
Headset Bearing
4
9
Headset Adjust Cone
2
10
Headset Compression Ring
2
11
Headset Spacer 10mm
6
12
Headset Top Cap & Bolt
2
13
Right Handlebar Assembly
1
14
Left Handlebar Assembly
1
15
Steering Linkage Assembly
1
16
Seat Frame Assembly
1
17
Quick Release Seat Pins (Not Pictured Above)
2
18
Seat Mesh (Not Pictured Above)
1
19
Upper Seat Strut (16.3mm x 150mm)
2
20
Lower Seat Strut (19.1mm x 400mm)
2
21
Seat Strut Pin
2
22
Rear Derailleur
1
23
Chain Tube Assembly
2
24
Chain (Not Pictured Above)
1
25
Pedals (9/16”)
1
4
Loading...