Sun Seeker Eco-Tad SX Supplemental Owner's Manual

Eco-Tad Supplemental Owner’s Manual



1

Go to www.sunseeker.bike for more information

Revised Date 1/2015



CONGRATULATIONS!

Congratulations and welcome to the Sun Seeker Recumbent family! You have selected one of the most comfortable and advanced recumbents on the
market. Please read this manual before riding your Sun Seeker Recumbent. In this manual you will find that we cover the basics for setting up and
understanding your new recumbent.

IMPORTANT:
This manual is only a supplement to the main Recumbent Bicycle/Tricycle Owner’s Manual.
Read it before you take the first ride on your new recumbent bicycle/tricycle, and keep it for reference.

NOTE:
This manual is not intended as a comprehensive use, service, repair or maintenance manual. Please see your dealer for all service, repairs or
maintenance. Your dealer may also be able to refer you to classes, clinics or books on bicycle use, service, repair or maintenance.

Eco-Tad Specifications

Model: Eco-Tad SX
Style: Tadpole Trike
Frame Material: Hi-Ten Steel
Fork Material: Hi-Ten Steel
Handlebar Material: Chromoly Steel
Steering System: Direct Linkage
Seat Type: 1-piece - Padded Base w/Steel Frame & Full Mesh
Wheelbase: 37-1/2″ (95cm)
Overall Length: 70-1/2″ - 78-3/4″ (179-199cm)
Width: 31″ (78.7cm)
Bottom Bracket Height: 13-3/4" (35cm)
Seat Height: 17″-18″ (43-46cm)
Weight: 46 lbs.
X-Seam : 31″ - 53″ (31-79cm)
Weight Limit: 300 lbs.
Gear Inch Range: 22 - 55
Headset: Threadless Steel
Drive Type: Direct 7 speed Derailleur
Pedals Type: Toe Clip Compatible
Crankset: Single Alloy 170mm 38t
Bottom Bracket: Square Taper Sealed Bearing
Chain Type: KMC Z-51
Front Derailleur: N/A
Rear Derailleur: Sunrace RD-M37
FW/Cassette Range: 13-32
Shifters Set: Sunrace TS-M28 Twist
Brake Levers: Promax Locking Linear Pull
Brake Caliper Front/Rear: Promax DSK-400 Mechanical Disc / nil
Rims / Spokes: Alloy Single Wall / Stainless Steel
Tires / Size: Kenda Kwest 20x1.50 40-65psi
Water Bottle Cage Mounts: 2-Handlebar / 2-Seat Back

Note: Specifications subject to change without notice.



2

Eco-Tad Reference Views

Side View

Top View



3

Eco-Tad Assembly Reference

ECO-TAD PARTS LIST

ITEM DESCRIPTION QUANTITY

1 Main Frame 1

2 Crank Boom Assembly 1

3 Right Front Wheel Assembly 1

4 Left Front Wheel Assembly 1

5 Rear Wheel Assembly 1

6 Chain Tube Assembly 2

7 Steering Linkage Assembly 1

8 Right Handlebar Assembly 1

9 Left Handlebar Assembly 1

10 Seat Frame Assembly (Not Pictured Above) 1

11 Seat Mesh 1

12 Upper Seat Strut 5/8"x 150mm 2

13 Lower Seat Strut 1/2"x 400mm 2

14 Rear Derailleur (Not Pictured Above) 1

15 Pedals 1

16 Headset Top Cap & Bolt 2

17 Quick Release Seat Pin M8*95mm 1

18 Quick Release for Rear Wheel M5*180mm 1

19 Headset Bearing 4

20 Headset Spacer 10mm 6

21 Headset Seal 4

22 Headset Compression Ring 2

23 Headset Adjust Cone 2

24 Chain (Not Pictured Above) 1

25 Cable Tie (Not Pictured Above) 2

26 Spare Bolt M8*110mm for optional Alloy Seat Frame (Not Pictured Above) 1

27 Seat Strut Pin 2



4