![](/html/6f/6fa4/6fa4743c9b108e84215c12161095f466594ce19d4e8309bbf705157b0c646619/bg1.png)
Eco-Delta Supplemental Owner’s Manual
Find us online at SunSeeker.bike Revised 12.2014
![](/html/6f/6fa4/6fa4743c9b108e84215c12161095f466594ce19d4e8309bbf705157b0c646619/bg2.png)
CONGRATULATIONS!
1-piece - Padded Base w/Steel Frame & Full Mesh
42-1/2″ - 63″ (126 – 160 cm)
68-3/4″ – 82-1/4″ (125 – 209 cm)
20-1/2″ – 22-3/4″ (52-58cm)
Direct 7 speed Derailleur
Promax Locking Linear Pull
Brake Caliper Front/Rear:
Promax Linear Pull / Promax DSK-400 Mechanical Disc
Alloy Single Wall / Stainless Steel
Kenda Kwest 20x1.50 40-65psi
Water Bottle Cage Mounts:
2-Handlebar / 2-Seat Back
Note: Specifications subject to change without notice.
Congratulations and welcome to the Sun Seeker Recumbent family! You have selected one of the most comfortable and advanced recumbents on the
market. Please read this manual before riding your Sun Seeker Recumbent. In this manual you will find that we cover the basics for setting up and
understanding your new recumbent.
IMPORTANT:
This manual is only a supplement to the main Recumbent Bicycle/Tricycle Owner’s Manual.
Read it before you take the first ride on your new recumbent bicycle/tricycle, and keep it for reference.
NOTE:
This manual is not intended as a comprehensive use, service, repair or maintenance manual. Please see your dealer for all service, repairs or
maintenance. Your dealer may also be able to refer you to classes, clinics or books on bicycle use, service, repair or maintenance.
Eco-Delta Specifications
![](/html/6f/6fa4/6fa4743c9b108e84215c12161095f466594ce19d4e8309bbf705157b0c646619/bg3.png)
Eco-Delta Reference Views
Side View
Top View
![](/html/6f/6fa4/6fa4743c9b108e84215c12161095f466594ce19d4e8309bbf705157b0c646619/bg4.png)
Eco-Tad Assembly Reference
Crank & Front Wheel Boom Assembly
Seat Mesh (Not Pictured Above)
Upper Seat Strut 5/8"x 150mm
Lower Seat Strut 1/2"x 400mm
Quick Release Seat Pin M8*95mm
Chain (Not Pictured Above)
Cable Tie (Not Pictured Above)
Spare Bolt M8*110mm for optional Alloy Seat Frame (Not Pictured Above)
Rear Wheel Nylock Retaining Nut M14
Rear Wheel Washer M15*2mm