Sunrise Medical sunrise surf User Manual

User Manual

sunrise surf & talk verbindungen einrichten

sunrise surf & talk

Welcome!

sunrise surf & talk: surf the Internet, send and receive e-mails- and make phone calls also without a ﬁ xed network connection.

It’s the new way of communicating. Suitable for anyone who wants to make calls and have cheap access to the Internet without a ﬁ xed network connection. From home or wherever you have access to the mobile network.

Speed

With mobile broadband from sunrise, surf the Internet with your PC or laptop at speeds up to six times that of ISDN.

Flexibility

The sunrise surf & talk box gives you the capability to set up Internet access quickly and easily in the most varied locations – at home, in your ofﬁ ce or on the road. Even mobile project teams can quickly and simply create the accustomed network environment in any location. If UMTS is not available, EDGE is selected automatically. If EDGE is not available, the unit automatically selects GPRS.

Networking

The sunrise surf & talk box is conﬁ gured to enable you to take advantage of Internet access via a LAN or WLAN with multiple devices simultaneously (laptop, PDA or PC). It is possible, furthermore, to exchange data between connected devices. You can, for example, synchronize the e-mail on your laptop and your PC, simply and securely – regardless of whether you are using a LAN or a WLAN. The sunrise surf & talk box is already set up. All connected computers are linked together in a network and can access among each other the ﬁ les and printers available in the network.

Security

The sunrise surf & talk box offers comprehensive security measures. The integrated ﬁ rewall protects you against attacks from the Internet. And the sunrise surf & talk box offers comprehensive protection capabilities for WLAN networks. WEP, WPA1+2 encryption are available to you. This gives you ﬂ exibility in deciding which type of protection is right for you (the support for each depends on your computer‘s WLAN interface).

Simple installation

The sunrise surf & talk box is installed in a few steps. You can start surﬁ ng and talking in no time. Insert the SIM card for sunrise surf & talk, connect the wall power supply and enter the PIN for the sunrise surf & talk SIM card. Check the mobile broadband reception quality. Six luminescent bars indicate very good reception. If necessary, change the location of the sunrise surf & talk box to improve the quality of reception. There is now nothing left to stand between you and your surﬁ ng enjoyment.

sunrise surf & talk

Flexible conﬁ guration

The administrative interface is the central coordinating point from which to conﬁ gure your sunrise surf & talk box. To access the administrative interface, all you need is a browser on your computer. It is not necessary to install any additional software. You can log in comfortably through the protected administrative interface and change the security settings for a WLAN or an IP address. A context-sensitive help function provides you with support through every step in the conﬁ guration. Should you make a mistake during conﬁ guration, you can restore the sunrise surf & talk box to its factory defaults at any time.

Everything in one unit

The sunrise surf & talk box is a genuine multi-talent. In a single unit it unites a WLAN access point, a router or bridge, a ﬁ rewall, a DHCP server a mobile broadband modem and a telephone connection, despite dimensions of no more than 18.5 x 4.9 x 10 cm. Power consumption is correspondingly low at 5 W. As a result, there is nothing to stand in the way of long-term use of the sunrise surf & talk box.

sunrise surf & talk

Table of Contents.

Your sunrise surf & talk box. 6

Safety instructions 6

Included in delivery 6

LCD display 7

Control options and connections 7

Instructions for use 8

First Steps. 10

Setting up connections. 14

Setting up a WLAN connection 14

Setting up a LAN connection 21

Basics of administration. 25

Logging in and logging out 25

Changing your password 26

Changing the PIN of the SIM card for sunrise surf & talk 26

Unlocking the SIM card for sunrise surf & talk 27

Setting the time and date 27

Conﬁ guring automatic disconnection 28

Conﬁ guring your APN (Access Point Name) 29

Disconnecting from the Internet 29

Restarting the sunrise surf & talk box 30

Restore factory settings (reset) 30

Switching the SIM card for sunrise surf & talk 31

Conducting the self-test 32

Updating ﬁ rmware 32

Telephone. 33

Using the telephone 34

Managing SMS messages. 40

sunrise surf & talk

Security settings in detail. 42

Basic ﬁ rewall protection 42

Additional protection through encryption 43

Pro settings. 47

Changing a static IP address 47

Conﬁ guring the DHCP server 47

Conﬁ guring dynamic DNS 48

Conﬁ guring port forwarding 49

Selecting a WLAN channel 49

Adjusting the WLAN output power 50

Diagnostic tools. 51

Status of the sunrise surf & talk box 51

Ping diagnosis 52

Troubleshooting – Administration interface. 53

Glossary. 56

Speciﬁ cations/Technical data. 58

Range of applications 58

Features 58

sunrise surf & talk Your sunrise surf & talk box

Your sunrise surf & talk box.

Safety instructions.

To avoid hurting yourself or doing damage to the electronic device, please keep the following tips in mind when installing and using the sunrise surf & talk box.

• The sunrise surf & talk box is a mobile electronic device, and is only intended for use in heated, dry, and dust-

free spaces. The device may not be mounted or placed in a location subject to direct sunlight or the effects of heat. The air slots and openings in the device are for ventilation purposes. These openings must not be covered or obstructed.

• The device must not come into contact with any liquids, as this can lead to electric shock or short circuit, and

can cause irreparable damage to the device.

• Do not open the case of your sunrise surf & talk box. If the case is opened by unauthorized persons, or inexpert

repairs are attempted, all warranty agreements become null and void. Furthermore, such actions are dangerous for users and can lead to damage to the device.

• The device should not be exposed to ﬁ re or other heat sources, and it should not be used in locations with a

potentially explosive atmosphere.

• The device should not be installed during a thunderstorm, and should remain unplugged during installation

procedures.

• The electronic interference produced by the device may affect the electronic systems and navigational systems

in airplanes, and for this reason, the use of this device on board aircraft is prohibited by law in most countries.

• Do not operate the device near medical equipment without prior permission.

Included in delivery.

The carton with the sunrise surf & talk box includes

• 1 sunrise surf & talk box

• 1 power supply cord with connecting cable for attaching to the power supply

• 1 Fast Ethernet 10/100 BaseT network cable

• 2 screws and rawlplugs for mounting the device on a wall

• 1 CD ROM with user’s manual and log-in information for the sunrise surf & talk box administration interface

• 1 Quick Start guide

• 4 rubber feet

sunrise surf & talk Your sunrise surf & talk box

LCD display.

1. Barometer – shows the current weather situation: sunny, overcast and rainy

2. Current time – displayed in 24-hour format

3. Current date in the format: DD.MM.YYYY

4. Status indicator for the local network connection to the computer:

WLAN or LAN

5. Status indicator for the availability and type of network: U, E or G (U=UMTS, E=EDGE or G=GPRS)

6. Display of the current outgoing or incoming telephone number

7. Display indicates an SMS message has been received

8. Bar indicator for the signal quality of the network in use (U, E or G).

The more bars displayed, the better the signal quality. A blacked-in box indicates that the function/option is active.

9. Voice mailbox

10. Call diversion

7109

Control options and connections.

LAN connection

The LAN connection is used to connect the sunrise surf & talk box to a PC or laptop by means of a network cable. Menu option 4 in the LCD display shows the type of connection between your sunrise surf & talk box and the PC or laptop connected to it. If both devices are switched on, the box for LAN should be blacked-in.

Power supply

To connect the device to the electrical grid, insert the smaller end of the power cable into this connector.

Telephone connection

Here you can connect your telephone. If you wish to have a telephone connected to the device, you can attach it here.

sunrise surf & talk Your sunrise surf & talk box

Reset button

The reset button is located in the small hole on the left of the

1 2

telephone jack, when looking at the sunrise surf & talk box from above. Depending upon how long you press the reset button, you can initiate the following actions:

• Restart the sunrise surf & talk box

• Restore the factory settings, also see Restore factory settings (RESET), p. 30.

Buttons

1. This button is used to adjust the brightness of the display.

2. This button switches the device on and off.

3. This button is used to manually connect to a mobile network.

Instructions for use.

Wiring

The sunrise surf & talk box cables can be easily lengthened, if required. You can purchase cable in the lengths you need at a computer or electronics store. Keep the following tips in mind, however, when attaching cables.

• If you wish to connect your computer directly to the sunrise surf & talk box, without using a switch or hub, be sure to use a crossover Ethernet 10/100 BaseT cable with STP («shielded twisted pairs»).

• If you wish to attach your computer to the sunrise surf & talk box via a switch or hub, be sure to use a standard Ethernet 10/100 BaseT cable with STP.

• The cable should be a maximum of 100 m long.

Wireless Local Area Network (WLAN)

The two WLAN standards used today, 802.11b and 802.11g, were developed by the Institute of Electrical and Electronic Engineers (IEEE). Using the 802.11b technology, a transfer rate of up to 11 Mbit/s can be obtained, while the 802.11g standard allows transfer speeds of up to 54 Mbit/s.

The sunrise surf & talk box supports both standards. With a WLAN adapter based on one of the two standards, you can connect to the sunrise surf & talk box. The range of the WLAN depends a lot on the WLAN adapter used, as well as structural considerations of the location of the network. WLAN devices of different standards can be used simultaneously to set up connections with the sunrise surf & talk box.

The sunrise surf & talk box is equipped with an internal WLAN antenna, which is not visible from the outside of the case.

sunrise surf & talk Your sunrise surf & talk box

Administration interface

The administration interface of the sunrise surf & talk box can be accessed either through the log-in link on the CD ROM, or with an Internet browser. The browser has to support JavaScript and CSS (e.g., Microsoft Internet Explorer version 5.5 or higher, or Mozilla Firefox).

Note: Please make sure that JavaScript is activated in your browser program.

DHCP server

The sunrise surf & talk box is equipped with its own DHCP server. The server is activated by default when it ships from the factory. Each computer connected to the device is issued an IP address by the DHCP server.

This means that you can assign ﬁ xed IP addresses to computers connected to the sunrise surf & talk box, directly within their network settings. The following IP addresses are reserved, and may not be used:

• 192.168.0.1

• 192.168.0.10 up to 192.168.0.200

Note: Please keep in mind that when you change an IP address, you no longer have the ability to access the

user interface using the log-in link on the CD ROM.

Note: If you use the sunrise surf & talk box in a network, no other DHCP server must be active in the network.

sunrise surf & talk First steps

First steps.

Set up the sunrise surf & talk box at a suitable location, one that meets the following criteria:

• The site should be dry and free of dust, and must not be exposed to direct sunlight.

• If you want to connect the device with your computer via network cable, keep in mind that the maximum cable length is 100 m, and situate the device near your computer.

• If you wish to establish a wireless WLAN connection from one or more computers to the sunrise surf & talk box, set up the device in a central location in your ofﬁ ce or at home, in a spot with good mobile broadband coverage.

• Be sure to allow for sufﬁ cient distance from any possible sources of interference or disturbance such as microwave ovens or electronic devices with large metal cases.

• On the bottom of the sunrise surf & talk box there are recesses into which you can place the rubber feet (included). They will help protect your furniture from being scratched.

• To mount the sunrise surf & talk box to the wall, use the drilling diagram included for this purpose. You can ﬁ nd the diagram at the end of this manual.

Step 1 – Insert the SIM card for sunrise surf & talk.

The SIM card is inserted in the same way as with your mobile phone: the SIM compartment is on the underside of the box, on the bottom of the device. Slide the sunrise SIM card into the compartment all the way, until it clicks into place. Important: The sunrise surf & talk box will not work without a SIM card for sunrise surf & talk.

Note: If the sunrise surf & talk SIM card is inserted improperly or is defective, the following text will be displayed after Step 3 has been completed: “Error SIM card”. In such an event, disconnect the device from the power supply and re-insert the sunrise surf & talk SIM card into the device, as shown in the diagram. If this still doesn’t solve the problem, your sunrise surf & talk SIM card may be defective.

Step 2 – Set up the sunrise surf & talk box

If possible, place the sunrise surf & talk box close to a window, as the reception is best there.

Note: If the message “No network” appears on the display after you’ve completed Step 3, you should choose another location to set up the device.

sunrise surf & talk First steps

Step 3 – Connect to power supply.

Be sure to use the original sunrise surf & talk box power cord. Other power cords may damage or destroy the device. If other power cords are used, sunrise does not assume responsibility for damages. First insert the small connector in the upper round slot in the sunrise surf & talk box, and then insert the larger connector in the power outlet. The device generally takes between 60–90 seconds to start up. The “Welcome” picture from the sunrise surf & talk box will appear, along with the message “Please wait...”. After the warm-up phase, you will see the message “Network search”. If a “Connection failure” message appears on the display, unplug the power plug, wait 20 seconds, and plug the power cord back in. Repeat this process until you are requested to enter a PIN number. If this has already occurred, the start screen will appear on the display. The connection bars on the right edge of the display show the quality of the connection.

Note: Please note that the type of connection is shown at the bottom of the display, “WLAN” on the left or “LAN” in the middle. The available network is shown on the bottom right ((U=UMTS, E=EDGE, G=GPRS).

Step 4a – Connect your PC/laptop to the sunrise surf & talk box.

There are two ways of connecting the sunrise surf & talk box to your PC or laptop: either using WLAN (wireless) or with the enclosed network cable (LAN).

Note: You need not shut down your computer in order to attach the network cable.

Step 4b – Attach telephone.

If desired, you can use the telephone in “stand alone” function, for example if you do not have a computer. Before you can use the telephone functions of the sunrise surf & talk box, you must activate the SIM card for sunrise surf & talk by entering the PIN. The PIN is saved in the sunrise surf & talk box. If you switch the sunrise surf & talk SIM card, you have to enter the PIN for the new sunrise surf & talk SIM card.After you connect a telephone to the sunrise surf & talk box and enter the PIN, you can make and receive calls immediately.

1. Pick up your receiver. The SIM card card for sunrise surf & talk is not yet activated. On the sunrise surf & talk box display, the following message appears: “Please enter PIN”. You will hear the dial tone, and an additional signal tone.

2. Press the button, enter your PIN and conﬁ rm by pressing the button.

If the PIN you entered is correct, you will hear a conﬁ rmation tone.

If the PIN you entered is incorrect, you will hear a warning tone and the following message will appear on the

display: “Incorrect PIN. X attempts remaining”.

3. Make a call or put the receiver back down.

Step 5 – Register the network with Windows.

You can ﬁ nd more detailed information in the chapter «Setting up connections», p. 14.

Note: The ﬁ rst steps for Mac OS users are not described in this manual. Mac OS users should consult their Apple manual, or contact Apple directly.

Step 6 – Connect to the Internet.

When getting started, you will need the PIN for the sunrise surf & talk SIM card that you inserted into the device. The PIN can be found in the enclosed SIM letter.

Note: The PIN is saved in the sunrise surf & talk box. After a SIM card for sunrise surf & talk has been changed, you will have to enter the new PIN for the new SIM card.

1. Log on to the administration interface of the sunrise surf & talk box. To do this, choose the «Security Wizard»

option from the main page of the CD ROM.

12sunrise surf & talk First steps

2. When prompted, enter «admin» as the user name and «admin» as the password. Press OK.

3. Step 1 of the Security Wizard: Activate the SIM card card for sunrise surf & talk. In the two ﬁ elds PIN and Con- ﬁ rm PIN, enter the PIN supplied with the SIM card for sunrise surf & talk, shipped with the sunrise surf & talk box. Click on Continue.

Note: The SIM card for sunrise surf & talk automatically chooses the fastest available network connection wit-

hout any input from the user.

4. Step 2 of the Security Wizard:

Access Point

The APN (Access Point Name) is a term with which you can specify your provider. The pre-set value here should be correct for use in the sunrise network.

Activate mobile broadband

If you have activated mobile broadband, the device will automatically connect to the mobile broadband network when you attempt to set up a connection to the Internet. (Variation: If you attempt to set up an outgoing connection from a client computer and have activated mobile broadband, the sunrise surf & talk box will automatically set up the connection.)

Disconnect when inactive

If you don’t use a mobile broadband connection for a set length of time once this connection has been established, the connection will be aborted automatically to save costs.

5. Step 3 of the Security Wizard:

It is essential that you activate encryption for your network. Otherwise, unexpected costs may arise. An unen-

cryptd access point allows other individuals to access your network from outside your premises, and to surf at your cost.

SSID

The SSID (Service Set Identiﬁ er) is a network identiﬁ cation code used by the device in a wireless network. You can choose this code on your computer, in order to connect with the device.

SSID transmissions

Normally, the device sends out its SSID to client computers to show availability. You can stop these transmissions, however, to further increase security. In this case, you have to enter the SSID manually at each client computer.

WLAN encryption

To prevent unauthorized outside individuals from connecting to your device and using it or monitoring your data trafﬁ c, you should deﬁ nitely encrypt your WLAN connection. The most secure methods of encryption, are, in order of security: WPA 1+2, WEP 128 Bit, WEP 64 Bit. You should choose the most secure method that is supported by your computer. The most up-to-date versions of Windows and Mac OS both support WPA 1+2.

WLAN encryption code

If you decide to encrypt your WLAN, you have to choose an encryption code. With the WPA encryption methods, you can choose either a password or a hexadecimal character code. The WEP encryption methods require a hexadecimal code with a length of 26 characters (128 bit) or 10 characters (64 bit).

13sunrise surf & talk First steps

Note: To guarantee the highest degree of security, the WPA 1+2 encryption method should be activated.

Furthermore, we would like to remind you that an unencrypted connection can lead to high costs for you, since an outside individual can use your network: «Your neighbor surfs at your cost».

For more detailed information, see chapter Setting up connections, p.14.

6. Step 4 of the Security Wizard:

Security level

The security level allows you to choose a pre-set security conﬁ guration. In particular, these conﬁ gurations affect which type of data trafﬁ c is allowed by the device, e.g. www or FTP services, e-mail, etc. If you require a detailed conﬁ guration of the security settings, you can modify one of the basic settings selected here at a later time, in the «Security» menu.

Your sunrise surf & talk box is now conﬁ gured. To exit the administration interface, you can either close the browser or enter a URL of your choice in the address line of your browser, thus proceeding into the wide domain of the Internet.

• The Internet connection is terminated automatically if it is inactive for a longer period of time.

• You can view the mobile broadband connection status in the Status menu, in the tab, mobile broadband.

sunrise surf & talk Setting up connections

Setting up connections.

You can connect your PC/laptop to the sunrise surf & talk box using WLAN (wireless) or with a network cable. In this section you will ﬁ nd the following directions:

• Microsoft Windows XP: Setting up WLAN connection on page 14

• Microsoft Windows 2000: Setting up WLAN connection on page 18

• Microsoft Windows XP: Setting up LAN connection on page 21

• Microsoft Windows 2000: Setting up LAN connection on page 23

If you use an operating system other than Microsoft Windows XP (Service Pack 2) or Microsoft Windows 2000, please read the user documentation from the respective manufacturer.

Setting up a WLAN connection.

In order to connect the sunrise surf & talk box using WLAN, the PC/laptop to be connected must support the WLAN standard IEEE 802.11b or IEEE 802.11g. If your PC/laptop does not support any of these standards, you can use an external WLAN adapter (e.g. on USB basis) or an internal WLAN board.

Microsoft Windows XP: Setting up a WLAN connection.

In order to be able to use a WLAN connection between your PC/laptop and the sunrise surf & talk box, the following steps are necessary:

1. Conﬁ gure a WLAN connection

2. Establish a WLAN connection

3. Deactivate any proxy server

4. Conﬁ gure encryption for the sunrise surf & talk box

5. Conﬁ gure encryption for your PC/laptop

Note: The following describes how to set up a WLAN connection, as an example, for the WLAN adapter «Intel®

PRO/Wireless 2200BG Network Connection». If you use a different WLAN adapter or a WLAN card, please read the user documentation of the respective manufacturer.

sunrise surf & talk Setting up connections

Step 1 – Conﬁ gure WLAN connection.

1. Start your PC/laptop.

2. Click on the START button in the taskbar of your PC and choose Settings > Network Connections. The Network Connections dialogue is opened.

3. Right click on Wireless Network Connection and select Properties in the context menu. The Wireless Network Connection Properties dialogue is opened.

4. Make sure that on the General tab the Internet protocol (TCP/IP) box is checked.

5. Highlight Internet protocol (TCP/IP) and click on the Properties button. The Internet protocol (TCP/IP) Properties dialogue is opened.

6. Check the Obtain an IP address automatically option ﬁ eld on the General tab and click on the OK button.

7. In the Wireless Network Connection Properties dialogue, click on the OK button.

You will be asked, if necessary, to restart your computer.

Step 2 – Establish WLAN connection

1. Click on the START button of the taskbar of your computer and select Settings > Network Connections. Der The Network Connections dialogue is opened.

2. Right-click on

Wireless Network Connection and select Display available wireless networks from the

context menu. The Wireless Network Connection dialogue is opened.

3. Mark the «sunrise surf & talk box» wireless network and click on the Connect button. It takes about ten seconds for the connection between your PC/laptop and the sunrise surf & talk box to be established.

sunrise surf & talk Setting up connections

Step 3 – Deactivate proxy server

If you use a proxy server for access to the Internet, deactivate it.

Note: As an example, the following describes the procedure for Microsoft Internet Explorer. If you use a different browser, please read the appropriate user documentation.

1. Start Internet Explorer.

2. Select Tools > Internet Options. The Internet Options dialogue is opened.

3. Click on the Connections tab.

4. Click on the LAN Settings button in the Local Area Network (LAN) Settings area. The Local Area Network (LAN) Settings dialogue is opened.

5. Uncheck the following boxes:

• Automatically detect settings

• Use a proxy server for your LAN

6. In order to save this conﬁ guration, click on the OK button.

7. Close the Internet Options dialogue by clicking on the OK button.

Step 4 – Conﬁ gure encryption for the sunrise surf & talk box

Please make sure that encryption is activated since otherwise additional costs could arise under certain circumstances. An uncoded access makes it possible for someone from the outside who accesses your network to surf at your expense.

Note: WPA encryption is preferable to WEP encryption. For this reason, conﬁ guration of WPA encryption is

described below as an example.

1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25).

2. Click on Encryption in the Security menu.

3. Select WPA1+2 from the Encryption mechanism selection list.

4. Check the Pass phrase option ﬁ eld in the WPA Settings area.

5. Enter any string into the Key ﬁ eld.

The string serves to dynamically produce the WPA key.

Please note! Please make a note of the string entered. You will need it in the next step for the conﬁ guration of your PC/laptop.

6. Click on the OK button.

The encryption is now activated for the sunrise surf & talk box, but not yet for your computer. This is why the

WLAN connection between the devices is interrupted. It is possible your browser will display the message «The document contains no data.»

sunrise surf & talk Setting up connections

Step 5 – Conﬁ gure encryption for your computer

1. Click on the START button of the taskbar of your computer and select Settings > Network Connections. The Network Connections dialogue is opened.

2. Right-click on Wireless Network Connection and select Properties from the context menu. The Wireless Network Connection Properties dialogue is opened.

3. Click on the Wireless Networks tab.

4. Mark «sunrise surf & talk box» in the Preferred Networks area and click on the Properties button. The sunrise surf & talk box Properties dialogue is opened.

5. Carry out the following settings in this dialogue:

• Select «WPA-PSK» in the Network Authentication selection list.

• Select «AES» in the Data Encryption selection list.

• Enter the string that you chose in the previous step for encryption the sunrise surf & talk box into the Network

Key and Conﬁ rm Network Key ﬁ elds.

6. Click on the OK button.

7. In the Wireless Network Connection Properties dialogue, click on the Close button.

The encryption is now activated for the sunrise surf & talk box and for your computer. The WLAN connection is automatically established between the devices.

You can now continue with Step 6 – Connect to the Internet (page 12).

sunrise surf & talk Setting up connections

Microsoft Windows 2000: Setting up a WLAN connection.

In order to be able to use a WLAN connection between your PC/Laptop and the sunrise surf & talk box, the following steps are required:

1. Conﬁ gure a WLAN connection

2. Establish a WLAN connection

3. Deactivate any proxy server

4. Conﬁ gure encryption for the sunrise surf & talk box

5. Conﬁ gure encryption for your PC/Laptop

Note: The following describes the setting up of a WLAN connection, as an example, for the WLAN adapter

«D-Link AirPremier AG DWL-AG530 Wireless PCI Adapter». If you use a different WLAN adapter or a WLAN card, please read the user documentation of the respective manufacturer also.

Step 1 – Conﬁ gure WLAN connection

1. Click on the START button of the taskbar of your computer and select Settings > Network and Dial-up Connections. The Network and Dial-up Connections dialogue is opened.

2. Right-click on the Local Area Connection of your WLAN card or your WLAN adapter and select Properties from the context menu. The Local Area Connection Properties dialogue is opened.

3. Make sure that on the General tab the box for Internet Protocol (TCP/IP) is checked.

4. Highlight Internet Protocol (TCP/IP) and click on the Properties button. The Internet Protocol (TCP/IP) Properties dialogue is opened.

5. On the General tab, click on the Obtain an IP address automatically option ﬁ eld and then click on the OK

button.

6. In order to save the conﬁ guration, click on the OK button in the Local Area Connection Properties dialogue.

You will be asked, if necessary, to restart your computer.

Step 2 – Establish WLAN connection

1. Start your PC/laptop.

2. Double-click on the D-Link AirPremier symbol in the taskbar of your computer. The D-Link AirPremier AG Utility dialogue is opened.

3. Click on the Conﬁ guration menu

4. Enter the SSID of the sunrise surf & talk box in the SSID ﬁ eld.

The SSID is registered as «sunrise surf & talk box» from the factory.

5. Click on the Save button.

6. Click on the Environment Overview menu.

+ 42 hidden pages