Sunrise Medical One-Arm Drive Quickie 2, One-Arm Drive Zippie GS, One-Arm Drive Zippie 2, One-Arm Drive Breezy Series, One-Arm Drive Quickie IRIS User Manual
...
User
Instruction
Manual
One-Arm Drive Option
Supplement to Quickie 2, Quickie TS, Quickie IRIS,
Zippie 2, Zippie GS, Breezy Series
Note: This supplement contains information on the
assembly and adjustments for the One-Arm Drive
Components of a Quickie 2, Quickie TS, Quickie IRIS,
Zippie 2, Zippie GS & Breezy Series wheelchairs
ONLY.
Please refer to the Quickie 2, Quickie TS, Quickie IRIS,
Zippie 2, Zippie GS, or Breezy Series User Instruction
Manual for Safety Tips,Troubleshooting, Maintenance,
Tool List, Accessories,Warranty, etc.
930331 Rev. F 930331 Rev. F
2 3
SUNRISE LISTENS
Thank you for choosing the One-Arm Drive Option. We want to hear your
questions or comments about this manual and the service you receive from
your supplier. Please feel free to write or call us at the address and telephone
number below:
Sunrise Medical
Customer Service Department
7477 East Dry Creek Parkway
Longmont, CO 80503
(303) 218-4500
Let us know if you change your address. This will allow us to keep you up to date
with information about safety, new products and options to increase your use and
enjoyment of your wheelchair.
FOR ANSWERS TO YOUR QUESTIONS
Your authorized supplier knows your One-Arm Drive best and can answer most
of your questions about chair safety, use and maintenance. For future reference,
fill in the following:
Supplier: ______________________________________________________________________________
Address: ______________________________________________________________________________
______________________________________________________________________________________
Telephone: ____________________________________________________________________________
Serial #: _____________________________________ Date/Purchased: ________________________
1. SUNRISE LISTENS II. TABLE OF CONTENTS
1. SUNRISE LISTENS .......................................................................... 2
11. TABLE OF CONTENTS ................................................................ 3
111. SPECIFICATIONS AND FEATURES ...................................... 3
1V. ASSEMBLY ............................................................................................ 5
V. ADJUSTMENTS ................................................................................ 6
930331 Rev. F
5
930331 Rev. F
4
IV. ASSEMBLYIII. SPECIFICATIONS AND FEATURES
A. INSTALLING AXLES
1. Installation
a. Mount axle plates on each side of the chair Breezy 500 & 510 (Fig. 1), Breezy
600 & Quickie LXI (Fig. 2), Zippie GS (Fig. 1a), Breezy (Fig. 3), Zippie 2 (Fig. 1a),
Quickie TS (Fig. 4), and Quickie IRIS (Fig. 5) must use bushings for proper
installation.
NOTE: DO NOT use camber with one-arm drive.
1. Inner Handrim
2. Outer Handrim
3. Drive Shaft Assembly
4. Drive Shaft Mounting (Storage)
Brackets (not visible)
5. Axle Tabs
6. Crossbraces
Fig. 1 Fig. 1a
Fig. 2
1
2
1
2
3
4
5
6
(Rear views of the wheelchairs)
Fig. 3
Fig. 4 Fig. 5
3
4
5
ONE-ARM DRIVE
Quickie TS
Loading...