BASE FRAME ..................................................................................................................................................................................................5
LOCKING MECHANISM NEW ZIPPIE TS.....................................................................................................................................19
BIG BUTTON AXLE SPOKE WHEELS..........................................................................................................................................30
FRONT ANTI-TIP...........................................................................................................................................................................39
WHEEL LOCK PUSH TO LOCK....................................................................................................................................................40
WHEEL LOCK PULL TO LOCK.....................................................................................................................................................42
HIGH WHEEL LOCK PUSH (LONG SLIDE)..................................................................................................................................44
HIGH WHEEL LOCK PULL (LONG SLIDE)...................................................................................................................................45
HIGH WHEEL LOCK EXTENSION HANDLE.................................................................................................................................48
GRADE AID ONLY ASSEMBLY.....................................................................................................................................................49
BACK FRAME................................................................................................................................................................................56
ELR CALF PAD 14-15...........................................................................................................................................................83
ELR CALF PAD 16-20...........................................................................................................................................................84
ELR CALF PAD 14-15...........................................................................................................................................................97
ELR CALF PAD 16-20...........................................................................................................................................................98
HIGH MOUNT EXTENSION TUBE....................................................................................................................................... 101
POSITIONING BELT MOUNT........................................................................................................................................................ 125
BACKPACKS AND SEAT POUCHES..................................................................................................................................................... 131
LEG STRAPS.......................................................................................................................................................................................... 132
PLASTIC SIDE GUARD.......................................................................................................................................................................... 139
PAGE 4NEW ZIPPIE TS/TS
FRAME (RIGID)
NOTE: * THESE ITEMS USED FOR CHAIRS WITH 17"18" SEAT DEPTH (19"20" FRAME DEPTH).
** USED ONLY WITH 18" WIDTH.
NOTE: * THESE ITEMS USED FOR CHAIRS WITH 17"18" SEAT DEPTH (19"20" FRAME DEPTH).
** REPLACE 561018 WITH ITEM 561014 ON CHAIRS WITH 20", 22", AND 24" REAR WHEEL OPTIONS.
*** 660352 & 660353 USED ON 18" TS SE WIDTH.
[01/2008]
Pos.Item NumberDescriptionRemarks
1*483088REAR FRAME EXT .065 15"-16" ZPSEE NOTE ABOVE.
2483089SEAT TUBE PLUG S/A TS/P5
32261291/4-28 x 1 1/4 BH C/S
4201100-QU1/4-28 NYLOCK NUT THIN
55610041" SADDLE 1/4" HOLE
7262100-QU1/4 AN WASHER FLAT
82261501/4-28 x 2 BH C/S
9262110-QU1/4 AN WASHER FLAT THIN
102211271/4-28 x 1 3/8 HEX C/S
12881691LATCH STUD SUPPORT BLK
132261905/16-18 x 1 3/4 BH C/S SHLDR
14505251TILT BRACKET ZP TS 45°
NOTE: When growing chair to 15" or 16". an additional cylinder lock mechanism is needed and item 8B is used with 12" rear wheel.
NOTE: For locking mechanism, see Section16, Mechanical Lock and Strut Assemblies.
NOTE: Part 505250 (TILT BRACKET ZP TS 30° ) Discontinued (Parts Only) and is only used on chairs prior to 9/21/02.
** These items used for chairs with (15" 16") seat depth (17" 19" Frame Depth).
*** For serial numbers prior to ZP56988, in the 11", 13", 15" and 16" sizes, please order part number 483184 (STRUT SADDLE GROWING) QTY of
NOTE: * THESE ITEMS USED FOR CHAIRS WITH 17"18" SEAT DEPTH. (19"20" FRAME DEPTH).
** 505250 (TILT BRACKET ZP TS 30) DISCONTINUED (PARTS ONLY), AND IS USED ON CHAIRS PRIOR TO 9/21/02.
172261905/16-18 x 1 3/4 BH C/S SHLDR
18551310LATCH STUD SUPPORT BLK
19881691S/A LATCH STUD NEW
20550119STRUT TUBE MOUNT BRACKET
22201100-QU1/4-28 NYLOCK NUT THIN
232261501/4-28 x 2 BH C/S
24262110-QU1/4 AN WASHER FLAT THIN
1,4,5*920309TS S/A 2" SEAT EXT W/HDWRSEE NOTE:
1,4,5,15A660908SEAT TUBE S/A TS 19-20(NEW)SPECIFY COLOR.
2,4,5,15B660909SEAT TUBE S/A TS (NEW)SPECIFY COLOR.
3-5,10920461STRUT TUBE HDWR KT ZP TS GRW
5,17-19921295S/A LATCH ASSEMBLY W/ BOLT BLK
6A,10,11A675080TS STRT TBE KIT GROWING SMALLSADDLES NOT INCLUDED.
6B,10,11B675081TS STRT TBE KIT GROWING MEDSADDLES NOT INCLUDED.
6C,10,11C675082TS STRT TBE KIT GROWING LARGESADDLES NOT INCLUDED.
5,10,13A,2090173045° TS RETRO KIT
5,7-9,12-14,22-24920301ZP TS SIDE FRAME W/ HDWR
PAGE 16NEW ZIPPIE TS/TS
FRAME (SWING-AWAY) DISC. 11/16/99
NOTE: When growing chair to 15" or 16". an additional cylinder lock mechanism is needed and item 8B is used with 12" rear wheel.
NOTE: For locking mechanism, see Section16, Mechanical Lock and Strut Assemblies.
NOTE: Part 505250 (TILT BRACKET ZP TS 30° ) Discontinued (Parts Only) and is only used on chairs prior to 9/21/02.
** These items used for chairs with (15" 16") seat depth (17" 19" Frame Depth).
*** For serial numbers prior to ZP56988, in the 11", 13", 15" and 16" sizes, please order part number 483184 (STRUT SADDLE GROWING) QTY of
NOTE: * ITEM 4 USED WITH SMALL (1012") AND MEDIUM (1214") FRAME WIDTHS.
ITEM 4A USED WITH LARGE (1416") AND XLARGE (1618") FRAM WIDTHS.
(01/2008)
Pos.Item NumberDescriptionRemarks
1580110CYL LOCK LEVER ASSM QT/QR/P5
228112010/32 x 5/8 PAN HD PHIL
3349021TRIGGER REL PIN TS/QT/P5
4A*342057CYL LOCK CABLE ASSM
4B*342056CYL LOCK CABLE ASSM T45
520010010-32 NYLOCK NUT
63495111/2" ID PLST CLAMP BLK
7261204#10 AN WASHER .063
8226032-QU10-32 x 1 1/2 BH C/S BLK
92261311/4-28 x 1 1/4 BH C/S SHLDR
10500609FLDG ZTS MCHLCK MNT SEAT FRM
11201100-QU1/4-28 NYLOCK NUT THIN
12262100-QU1/4 AN WASHER FLAT
13201110-QU1/4-28 NYLOCK NUT
14342078MECH CYLINDER LOCK BR RCLNRRIGHT
14342079MECH CYLINDER LOCK BR RCLNRLEFT
15520916FLDG ZTS MCHLCK PVT SPCR FRM
NEW ZIPPIE TS/TSPAGE 19
(01/2008)
Pos.Item NumberDescriptionRemarks
16321141.650L x 6 COIL SPRING
173420001/4" E-CLIP
182261301/4-28 x 1 1/2 BH C/S
192211931/4-28 x 2 3/4 G8 HEX C/S
205610041" SADDLE 1/4" HOLE
2134204910mm ID SPLIT COLLAR
1-21920652MECH LOCK ASSM R SHT CBL NEW TSRIGHT
1-21920653MECH LOCK ASSM L SHT CBL NEW TSLEFT
1-3,4A,5-21920771MECH LOCKI ASSM R LNG CBL NEW TSRIGHT
1-3,4A,5-21920772MECH LOCKI ASSM L LNG CBL NEW TSLEFT
11,13,14,17922055ZTS MECH LOCK REPAIR KIT
1-4A,6,14-17,21922240LOCKING MECH KIT SML/MED ZPTSRIGHT
1-4A,6,14-17,21922241LOCKING MECH KIT SML/MED ZPTSLEFT
1-4B,6,14-17,21922242LOCKING MECH KIT LRG/XLG ZPTSRIGHT
1-4B,6,14-17,21922243LOCKING MECH KIT LRG/XLG ZPTSLEFT
PAGE 20NEW ZIPPIE TS/TS
LOCKING MECHANISM
(01/2008)
Pos.Item NumberDescriptionRemarks
128112010-32 x 5/8 PAN HD PHIL
2349021TRIGGER RELEASE PIN TS/QT/P5
3342057CYLINDER LOCK CABLE ASSEMBLY
434204910mm ID SPLIT COLLAR
52261291/4-28 x 1 1/4 BH C/S
62261301/4-28 x 1 1/2 BH C/S
7262100-QU1/4 AN WASHER FLAT
82261905/16-18 x 1 3/4 BH C/S SHLDR
9580110CYL LOCK LEVER ASSEMBLY QT/QR/P5
10A342078MECH CYLINDER LOCK R BR RECLINER
10B342079MECH CYLINDER LOCK L BR RECLINER
11201100-QU1/4-28 NYLOCK NUT THIN
12500140CYLINDER BRACKET 1" TS/P5
132021025/16-18 NYLOCK NUT THIN
14500141CYLINDER BRACKET TS 1 1/2"
152621306mm WASHER WAVE
163495111/2" ID PLASTIC CLAMP BLK
17560410ZIP TIE BLACK
183420001/4" E-CLIP
19321141.650L x 6 COIL SPRING
2020010010-32 NYLOCK NUT
21261204#10 AN WASHER .063
NEW ZIPPIE TS/TSPAGE 21
(01/2008)
Pos.Item NumberDescriptionRemarks
2222603210-32 x 1 1/2 BH C/S BLK
1-3,5-9,10A,11-22920493MECH CYL LOCK ASSM R TS 45° NEWRIGHT
1-3,5-9,10B,11-22920494MECH CYL LOCK ASSM L TS 45° NEWLEFT
PAGE 22NEW ZIPPIE TS/TS
LOCKING MECHANISM DISC.
NOTE: 45 DEG MECHANICAL CYLINDER LOCK ASSEMBLY IS STANDARD BEGINNING 11/13/93.
* ITEM 4 REQUIRED ON ALL MECH LOCK ASSEMBLIES FOR CHAIRS WITH
THE FOLLOWING CONFIGURATIONS: FIXED FRONT 15" AND 16"; 10" SEAT
DEPTH; S/A MODELS WITH 6" AND 8" CASTERS.
AND 2" EXTENSIONS; FIXED MODELS WITH 8" CASTER AND 2" EXTENSION.
(01/2008)
Pos.Item NumberDescriptionRemarks
128112010-32 x 5/8 PAN HD PHIL
2349021TRIGGER RELEASE PIN TS/QT/P5
3342057CYLINDER LOCK CABLE ASSEMBLY
4*34204910mm ID SPLIT COLLAR
52261291/4-28 x 1 1/4 BH C/S
62261301/4-28 x 1 1/2 BH C/S
7262100-QU1/4 AN WASHER FLAT
82261905/16-18 x 1 3/4 BH C/S SHLDR
9580110CYL LOCK LEVER ASSEMBLY QT/QR/P5
10A342078MECH CYLINDER LOCK R BR RECLINER45° RIGHT
10A342079MECH CYLINDER LOCK L BR RECLINER45° LEFT
10B347051MECH CYLINDER LOCK R30° RIGHT
10B342052MECH CYLINDER LOCK L30° LEFT
11201100-QU1/4-28 NYLOCK NUT THIN
12500140CYLINDER BRACKET 1" TS/P5
NEW ZIPPIE TS/TSPAGE 23
(01/2008)
Pos.Item NumberDescriptionRemarks
132021025/16-18 NYLOCK NUT THIN
14500141CYLINDER BRACKET TS 1 1/2"
152621306mm WASHER WAVE
163495111/2" ID PLASTIC CLAMP BLK
17560410ZIP TIE BLACK
183420001/4" E-CLIP
19321141.650L x 6 COIL SPRING
2020010010-32 NYLOCK NUT
21261204#10 AN WASHER .063
2222603210-32 x 1 1/2 BH C/S BLK
1-3,5-9,10A,11-22920415MECH CYL LOCK ASSEMBLY 45° R TSRIGHT
1-3,5-9,10A,11-22920405MECH CYL LOCK ASSEMBLY 45° L TSLEFT
1-10B,11-22920315MECH CYL LOCK ASSEMBLY 30° R TSRIGHT
1-10B,11-22920305MECH CYL LOCK ASSEMBLY 30° L TSLEFT
PAGE 24NEW ZIPPIE TS/TS
AXLE BRACKET
NOTE: WHEN USING MAG WITH A HEIGHT ADJUSTABLE ARM, ORDER PART NUMBERS 920129 AND 920117.
NOTE: ITEM 4 USED ON QUICKIE TS BEGINNING SERIAL NUMBER QT2802.
* ORDER ITEMS 1 AND 1A FOR QUICKIE TS AMPUTEE AXLE PLATE.
(01/2008)
NEW ZIPPIE TS/TSPAGE 25
(01/2008)
Pos.Item NumberDescriptionRemarks
1A*505320QR AXLE PLATE ZP TS RSTANDARD SHORT)
1B*505321QR AXLE PLATE ZP TS LSTANDARD (SHORT)
1C*506120QR AXLE BRACKET ZP TS PLUS REXTENDED ( LONG)
1D*506121QR AXLE BRACKET ZP TS PLUS LEXTENDED (LONG)
22261401/4-28 x 1 3/4 BH C/S
3201110-QU1/4-28 NYLOCK NUT
45610851 1/8" HALF SADDLE 2 HOLE QTS
5920117MAG SPACER 6S W/SET SCREW
6A920129QR AXLE W/NUT
6B349069QR AXLE AND NUT CLEAR BIG BTTN
5,6A920138QR AXLE W/SPACER FOR 6S MAG
1A,1B,2-4,6B920132ZP TS QR AXLE ASSEMBLY SPKPAIR
1A,1B,2-6A920142ZP TS QR AXLE 6S MAG W/HDWRPAIR
1C,1D,2-4,6B920135ZP TS QR AXLE ASSEMBLY SPOKE X-LONGPAIR
1C,1D,2-6A920143ZP TS QR AXLE 6S MAG W/HARDWARE X-LONGPAIR
PAGE 26NEW ZIPPIE TS/TS
AXLE BRACKET 12"
NOTE: * ITEM 7, MAG SPACER, NOT REQUIRED EFFECTIVE SERIAL NUMBER ZP32173.