Page 1
Nov/04 MNCB8169S001
1
10/100/1000 Gigabit Ethernet
CardBus Adapter
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
Respective owners.
Page 2
Nov/04 MNCB8169S001
2
Overview
This CardBus Ethernet PC Card supports 10Mbps, 100Mbps and
1000Mbps and automatic speed detection and connection. With its
32-bit high speed bus, the card provides high bandwidth networking
capability to notebook PCs.
General Features
z Realtek RTL8169SBL chipset
z Auto-Negotiation with Next Page capability
z Crossover Detection & Auto-Correction
z Wake-on-LAN and remote wake-up support
z Support Full Duplex flow control(IEEE 802.3X)
z Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
z Supports IEEE 802.1P Layer 2 Priority Encoding
z Supports IEEE 802.1Q VLAN tagging
System Requirements
z Windows® 98SE, Me, 2000, XP
z 64MB of RAM
z Available Type II CardBus Slot
z CD-ROM Drive (for driver installation)
Page 3
Nov/04 MNCB8169S001
3
Package Contents
z One CardBus Ethernet PC Card
z One Driver CD
Hardware Setup And Driver Installation
Before installing the PCMCIA 10/100/1000 Ethernet Adapter,
understand the usage of the connectors on the CardBus Card.
LED Status
LED Indicators Color State Indication
On Connection at 1000Mbps F Red
Flash Sending/Receiving Data
On Connection at 100Mbps L Green
Flash Sending/Receiving Data
Page 4
Nov/04 MNCB8169S001
4
Windows® 98SE/ME/2000/XP Driver Installation
Note: Please take notice of the installation order. First, run the
InstallShield Wizard, and then plug in the PCMCIA Ethernet
Adapter to the CardBus Slot.
1. Power on your computer and boot to Windows.
2. Insert the Driver CD into the CD-ROM Drive, and then please
browse CD and locate the Driver Folder “\Cardbus\Gigabit
LAN” and double click the InstallShield driver setup program
“Setup.exe” to start the application installation procedure, and
follow the on-screen instructions to complete the installation.
Loading...