RF RGBW Controller
SR-2819T8 with SR-1009FA series
8 zones,long press can turn on/off each zone
Press-button RGBW controller
Receivers work with WIFI-RF convertor to be controlled by smart phone
5
Brief introduction of buttons
Working status indicator, the sender is in dormant status when the indicator is off. The
sender is under working when the indicator is flashing rapidly. If the indicator continues
flashing at the frequency of 1 second, it indicates that the sender batteries low and
needs to replace new batteries.
Touch wheel for selecting R/G/B colors
R G B W
S- S+
W+
B- B+
P- P+
1
2 3
5
6 7
R G
B W
Short press: switch on/off each channel;
Long press: dim up/down each channel
Note: If you press R, then press G, then it is mix color of R and G. If you want
to get G color directly, please press R to switch off of R first. Then press G.
4
S-
8
Speed down when color is changing
B-
Brightness down
Turn ON/OFF
P- P+
Build-in 10 Dynamic modes,P- is previous mode,P+ is next mode.
3
1 2
5 6
4
are zone numbers,long press switch on/off each zone.Short press is to choose a
zone.To synchronize several zones,short press 2 or more buttons one after another.
7
8
Wiring diagram
1)Receiver Connection Diagram for Single Unit
S+
Speed up when color is changing
B+
Brightness up
Parameter
Remote
Part No.
SR-2819T8 4.5VDC
Receiver
Part No.
SR-1009FA 12-36VDC
SR-1009EA 12-36VDC
SR-1009FA3 12-36VDC
SR-1009FA7 12-36VDC
Product Size
43.8
Operation Voltage
Input Voltage
131.6
Operation
Frequency
916.07MHz
Output Current
4x5A
4x350mA
DIMENSIONS
ΓΈ/h (mm)
43.8x131.6x24.5
Output Power
4x(60-180)W
4x(96-288)W4x8A
4x(4.2-12.6)W
4x(8.4-25.2)W4x700mA
Remarks
Constant voltage
Constant voltage
Constant current
Constant current
24.5
2) Connection Diagram for Multiple UnitsReceiver
Power Supply
12-36VDC
Learning Key
Power Supply
12-36VDC
Learning Key
Learning Key
Learning Key
SR-1009FA
LED CONTROLLER
SR-1009FA
LED CONTROLLER
SR-1009FA
LED CONTROLLER
SR-1009FA
LED CONTROLLER
110V-230VAC
LN
1234
white
110V-230VAC
LN
1234
white
1234
white
1234
white
Operation
1. Do wiring according to connection diagram and install battery into remote control.
2. How to learn&delete ID process?
a. Turn on the remote by .
b. Short press at Learning Key on receiver.
c. Press any zone button(which you desire to control) on remote, for example .
d.Then touch color wheel.
e.Connected LED light will blink to confirm zone designation.
How to reset to factory default: Long Press Learning Key on receiver for over 5 seconds until connected LED light flash off,
to delete the learned ID, the receiver will be reset to factory default. If you want to learn receiver into another zone, please follow
learning ID process operation 2.
1
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
Warranty Agreement
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Loading...