sunpentown SF18M45 User Manual
OWNER’S MANUAL
18" OUTDOOR MISTING FAN
MODEL: SF-18M45
READ AND SAVE THESE INSTRUCTIONS
CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
1. To reduce the risk of re or electric shock, do not use this fan with any solid state speed control device.
2. This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. Plug into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
3. This fan is provided with a ground fault circuit interrupter (GFCI) built into the power supply cord. This device
provides additional protection from the risk of electric shock. Should replacement of the plug or cord
become necessary, use only identical replacement parts that include GFCI protection.
4. Do not leave the fan running unattended.
5. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a
short-circuit may be present and the product should be discarded or returned to an authorized service facility
for examination and/or repair.
6. Risk of re. Do not replace attachment plug, which contains a safety device (fuse), that should not be removed.
Discard product if the attachment plug is damaged.”
RULES FOR SAFETY OPERATION
1. Fan should be used under rated voltage.
2. Connect power only after the fan is fully assembled.
3. Never insert ngers, pencils, or any other object through the guard when fan is running.
4. Unplug from outlet when: not in use, when moving fan from one location to another, before putting on or
taking off parts, and before cleaning.
5. Disconnect fan when removing grilles for cleaning.
6. Be sure fan is on a stable surface when operating to avoid overturning.
7. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility
for examination and/or repair .
8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,or similar coverings. do not
route cord under furniture or appliances. Arrange cord away from trafc area and where it will not be
tripped over.
9. “Press the TEST button (then RESET button) every month to assure proper operation.”
User Servicing Instructions
a) Grasp plug to remove from the receptacle. Do not unplug by pulling on cord.
b) Fuse is located on the plug. Slide the fuse cover towards the blade to open.
c) Remove fuse carefully. Using a tweezer, insert the tip of your tool into
fule slot and grasp one end. Remove the fuse gradually and slow do not
overexert. If it feels tight, wiggle gently to remove little by little. When one
side of the fuse has come loose, the entire fuse can be removed.
d) Risk of re. Replace fuse only with 5 Amp, 125 Volt fuse.
e) Slide to close the fuse access cover.
f ) Risk of re. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment
plug is damaged.
1
Loading...