Sunpentown SF-1666M Installation Manual

16” OUTDOOR MISTING FAN

Model: SF-1666M

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:

1. Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock or
injury to persons.

2. This product is intended for household use ONLY and not for commercial or industrial use.

3. To protect against electric shock, do not immerse unit, plug or cord in water or spray with liquids.

4. Close supervision is necessary when any appliance is used by or near children.

5. Unplug fan from outlet when not in use, when moving from one location to another or before cleaning.

6. Avoid contact with moving parts.

7. Do not operate in the presence of explosives and/or flammable fumes.

8. Do not place fan or any parts near an open flame, cooking or heating appliance.

9. Do not operate fan with a damaged cord, plug or after the fan malfunctions or has been dropped or damaged in
any manner.

10. Do not let cord hang over the edge of a table or counter, or let it touch hot surfaces.

11. To disconnect, grip plug and pull from wall outlet. Never yank on cord.

12. Always use on a stable and level surface.

13. Do not hang or mount fan on a wall or ceiling.

14. Do not operate without fan grills properly in place.

15. To reduce the risk of electric shock, do not use extension cord with this fan.

16. To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch the plug with wet
hands.

17. Do not operate fan until fully assembled.

18. Ensure the correct voltage is being used prior to plugging in your fan (120V AC electrical outlet).

19. Do not immerse fan or expose fan to any form of liquid.

20. Do not operate the fan directly adjacent to curtains, plants, window covering, etc. to avoid accidental
entanglement.

21. While your fan is tolerant to exposure of most weather situations, we recommend that you bring the fan indoors
or to a covered location during periods of extreme cold, snow or rain.

22. Always keep your fan covered when not in use to prevent excessive exposure to moisture and sun.

23. Do not submerge your fan under water and keep a safe distance from pools, outside water features or irrigation
sprinklers.

24. To avoid potential fire hazards, never place your fan or its electrical cord under rugs or carpeting.

25. DO NOT use when raining. Rain may create electrical hazard.

SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire or electrical shock and injury to persons, DO NOT use in a window.
WARNING: Do not use this fan with any solid state speed control device.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DO NOT UNDER ANY CIRCUMSTANCES REMOVE THE GROUND PRONG OR GROUND FAULT UNIT.
Removal or tampering of the power cord will void warranty

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electrocution. Check with a
qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the product. If it does not fit the outlet, have a proper outlet installed by a qualified
electrician. Do not use any type of adaptor with this product.

GROUND FAULT CIRCUIT INTERRUPTER (GFCI)

This fan is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This
device provides additional protection from the possibility of electric shock.
Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI
protection.
Press the TEST button (then RESET button) every month to assure proper operation.

UNPLUG THE FAN WHEN NOT IN USE.
This fan is intended for outdoor use but may be used indoors WITHOUT THE MISTING FEATURE.

1

PARTS IDENTIFICATION

Nozzle Plug

Accessories

• Extra nozzle x 1

• Nozzle plug x 1: replace misting nozzle with nozzle plug to block water atomization where mist is not

desired or needed.

The important safety instructions of the fan shall include the following statements:

• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit

situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per instructions and
check the product. If the replacement fuse blows, a short-circuit may be present and the product should be
discarded or returned to Sunpentown for examination and/or repair.

• Do not operate any fan with a damaged cord or plug. Discard fan or return to Sunpentown for examination

and/or repair.

• Do not run cord under carpeting. Do not cover with throw rugs, runners or similar coverings. Do not route

cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

1. Grasp plug and remove from receptacle; do not unplug by pulling on cord.

2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.

3. Remove fuse carefully.

4. Risk of fire. Replace fuse only with 5 amp, 120 volt fuse.

5. Close fuse cover. Side close the fuse access cover on top of attachment plug.

2