Sunpentown SF-1522 Installation Manual

INSTRUCTION MANUAL

TOWER FAN: SF-1522

PLEASE READ BEFORE USE AND SAVE THIS MANUAL

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE

When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:

1、 Use this fan only as described in this manual. Other use not recommended may cause

fire, electric shock or injury to persons.

2、 This product is intended for household use ONLY and not for commercial, industrial or

outdoor use.

3、 To protect against electric shock: do not place fan on windowsills, immerse unit, plug or

cord in water or spray with liquids.

4、 This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. DO NOT attempt to defeat this safety feature.
5、 Close supervision is necessary when any appliance is used by or near children.
6、 Turn the fan OFF and unplug the fan from the outlet when not in use, when moving the

fan from one location to another and before cleaning.
7、 To disconnect the fan, first turn the unit OFF, grip the plug and pull it from the wall outlet.

Never pull the plug by the cord.
8、 Do not operate the fan in the presence of explosive and/or flammable fumes.
9、 Do not place the fan or any parts near an open flame, cooking or other heating

appliance.
10、 Do not operate fan with a damaged cord or plug, or if the product malfunctions, or

dropped and damaged in any manner (see warranty).
11、 Avoid contact with moving fan parts.
12、 The use of attachments not recommended by the manufacturer may be hazardous.
13、 Place the fan on a dry level surface.
14、 Do not hang or mount fan on a wall or ceiling.
15、 Do not operate if the fan housing is damaged.
16、 A loose fit between the AC outlet (receptacle) and plug may cause overheating and a

distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.

WARNING: To reduce the risk of fire and electric shock, do not use this fan with any
solid-state speed control device.