Sunpentown SD-2202S Installation Manual
Instruction Manual
SD-2202W
SD-2202S
Dishwasher
Read this Manual
Safety Information
Grounding Instruction............................1
Safety Instructions.................................1
Dear Customer,
Please read this manual thoroughly before use.
Understanding the unit will help you use and maintain
the dishwasher properly.
Please keep in a safe place for future reference.
Pass it on to any subsequent owner of the appliance.
For your safety, the information detailed in this manual
should be followed. Improper use/handling can cause
serious damage to the appliance and/or to the user,
including but not limited to fire, explosion, electric shock,
resulting in personal injury or death.
Before Calling for Service
Review the section on Troubleshooting Tips - it may
help you solve some common issues.
If you can not resolve the troubles by yourself ,
please ask for the help of professional technicians.
Parts Identification
Front & Back View.................................2
Accessories...........................................2
Installation
Unpacking.............................................3
Positioning.............................................3
Electrical Requirements........................3
Connecting the Dishwasher...............4-5
Disconnecting the Dishwasher..............5
Operating Instructions
Checklist................................................6
Control Panel.........................................6
Loading the Dishwasher........................7
Cutlery Basket.......................................8
Detergent Dispenser..............................9
Rinse Aid Dispenser............................10
Wash Cycle Table................................11
Starting a Wash Cycle.........................11
Changing the Wash Program..............12
Forgot to Add a Dish?..........................12
At the End of the Wash Cycle..............12
Maintenance
Filter System.......................................13
Filter Assembly....................................13
Cleaning the Filters.............................13
Cleaning the Dishwasher....................14
Cleaning the Door...............................14
Cleaning the Spray Arm......................14
Protect Against Freezing.....................14
Keeping Your Dishwasher in Shape....15
NOTE:
The manufacturer, following a policy of constant
development and updating of the product, may
make modifications without giving prior notice.
Troubleshooting.......................16-17
Error Indications...........................17
Technical Information.................18
Warranty
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING
WARNING!
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of
least resistance of electric current. This appliance
is equipped with a cord having an equipmentgrounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with
all local codes and ordinances.
WARNING! PROPER USE
Use this appliance only for its intended purpose
as described in this manual.
This appliance is not intended for use by children.
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not touch the heating element during or
immediately after use.
(This instruction is only applicable to machines
with a visibal heating element.)
Do not operate your dishwasher unless all
enclosure panels are properly in place. Open
the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects or stand on the
door when it is open. The appliance could tip
forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely
to damage the door seal;
2) Wa rn in g: K ni ve s an d ot he r ut en si ls w it h
sharp points must be loaded in the basket
with their points down or placed in a
horizontal position.
Check that the detergent receptible is empty
after completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent. For plastic it ems
notm
manufacturer’s recommendations.
Use only detergent and rinse additives
designed for an automatic dishwasher.
Never use soap, laundry detergent, or hand
washing detergent in your dishwasher. Keep
these products out of the reach of children.
When using your dishwasher, follow the precautions listed below:
WARNING!
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or service
representative if you are in doubt whether the
appliance is properly grounded. Do not modify the
plug provided with the appliance; If it does not fit the
outlet. Have a proper outlet installed by a qualified
electrician.
Keep children away from detergent and rinse aid, keep
children away from the open door of the dishwasher,
there could still be some detergent left inside.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
Children should be supervised to ensure that they do
not play with the appliance.
arked as dishwasher safe, refer to the
concerning use of the appliance by a person responsible
for their safety.
Dishwasher detergents are strongly alkaline, they
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.
The door should not be left in the open position
since this could present a tripping hazard.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.
Remove the door before discarding an old dishwasher.
Please dispose of packing materials properly.
Use the dishwasher only for its intended function.
During installation, the power supply must not
be excessively or dangerously bent or flattened.
Do not tamper with controls.
Use new set of hoses to connect this appliance to the
water mains. Do not reuse old hose sets.
The maximum number of place settings to be
washed is 6.
The maximum permissible inlet water pressure is
1Mpa.
The minimum permissible inlet water pressure is
0.04Mpa.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY
SAVE THESE INSTRUCTIONS
1
PARTS IDENTIFICATION
Cup Shelf
FRONT VIEW
Cutlery Basket
Detergent
1
Dispenser
3
2
Rinse Aid
Dispenser
7
Main Basket
Spray Arm
Filter
Assembly
Drain Port
BACK VIEW
Inlet Port
Power Cord
ACCESSORIES
Your dishwash er comes equipped with a 'quick connect' assembly (includes inlet a nd drain hose ). The
fauc et adapter mu st be install ed on the faucet before you can connect the dishwasher. This adapter is
incl uded inside y our dishwas her. The faucet adap ter is compat ible with fau cets inclusive of either male
(out side) or fema le (inside) t hreaded faucet connections.
WARNING!
In order t o av oid water pressure build up, pl ea se turn off th e faucet after each use.
2
INSTALLATION
Attention:
The installation of the pipes
and electrical equipments
should be done by professionals.
Warning
Electrical Shoc k Ha za rd
Disconnect elec tr ic al power before
installing dish wa sh er.
Failure to do so can re su lt i n death
or electrical sho ck .
Unpacking
Have at least two people to move and install the dishwasher to prevent personal injuries.
Remove all packaging materials: shipping tape, foam pieces, etc. before use. Do not use
sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners. Check and
make sure all parts necessary for installation are included. If parts are missing, please
contact Sunpentown at 1-800-330-0388. The dishwasher must be placed on a level and
flat surface that can support the weight when the dishwasher is fully loaded.
Positioning
This dishwasher is designed for countertop installation. The dishwasher is equipped
with water supply and drain hoses that can be positioned to the right or the left
to facilitate proper installation. Make sure water supply/faucet connection is within
reach of the inlet and drain hose assembly (5 ft).
Electrical Requirements
Read all safety precautions listed at the beginning of the manual. Make sure the
electrical outlet is within reach of the power supply cord (4.5 ft). It is recommended
to not use receptacles that can be turned on/off by a switch or pull chain.
Refer to the rating label and be sure the voltage and frequency corresponds to the
power supply. Use a dedicated circuit that is rated for 10 amps.
The dishwasher is equipped with a power supply cord with a 3-prong grounding plug.
The cord must be plugged into a mating 3-pronged wall receptacle. If a mating wall
receptacle is not available, it is the personal responsibility of the customer to have a
properly grounded, 3-pring wall receptacle installed by a certified electrian.
WARNING!
· DO NOT use an extension cord or an adapter plug with this appliance.
· DO NOT, under any circumstances, cut or remove the ground-prong.
· Improper connection of the connection of the equipment grounding conductor can result in
electric shock.
· Check with a qualied electrician or service representative if you are in doubt whether
the appliance is properly grounded.
3
Connecting the Dishwasher
Faucet Adapter & Washer
Your dishwasher is equipped with a Faucet Adapter (installed on the Quick Connect),
Quick Connect, Drain and Inlet Hose. The faucet adapter must be installed on the
faucet before connecting the dishwasher.
Remove the Faucet Adatper by pulling back the locking collar
on the Quick Connect; while pulling the Faucet Adapter in the
opposite direction.
Locking Collar
Installing Quick Connect to faucet
The Faucet Adapter is compatible with either female
(inside) or male (outside) threaded faucet connections:
· If your faucet is “female” type, both rubber washers
must be installed inside the faucet adapter.
· If your faucet is “male” type, use only one rubber
washer. Remove the second rubber washer.
4
1. Screw the Faucet Adapter onto (or into) the faucet. Check for leaks (use Teon or plumbers
tape to eliminate any leaks if necessary).
2. Connect the six-sided connection of the Drain Hose to the dishwasher’s drain port, located
on back of the dishwasher cabinet. To avoid damage to threads, do not over-tighten.
3. Connect the star-shaped connection of the Inlet Hose to the dishwasher’s inlet port, located
on the back of the dishwasher cabinet. Do not over-tighten.
4. Connect the circular connection of the Drain Hose to the longer (bottom) male connection
on the Quick Connect.
5. Connect the circular connection of the Inlet Hose to the shorter (top) male connection on the
Quick Connect.
6. Attach the Quick Connect assembly onto the Faucet Adapter - pull down on the locking collar,
while pushing the Quick Connect assembly upwards onto the Faucet Adapter.
7. Release the locking collar when the Quick Connect Assembly snaps onto the Faucet Adapter.
Verify connection is secure.
8. Slowly turn on the water line and check for any signs of water leak at all connections. If leaks
are located, immediately turn off the water supply and repair hose connections.
IMPORTANT
· Once you turn on the water supply (even if turned off immediately), the inlet hose will be pressurized.
· To relieve the water pressure (make sure water supply is turned off): press and hold the red
pressure relief button on the Quick Connect until the ow of water stops.
WARNING
FAILURE TO RELIEVE WATER PRESSURE, BEFORE DISCONNECTING THE QUICK-CONNECT
FROM THE FAUCET, WILL RESULT IN BACK-PRESSURE OVER-SPRAY. THE TEMPERATURE
OF INCOMING WATER CAN BE VERY HOT, AND BACK-PRESSURE OVER-SPRAY CAN CAUSE
SEVERE BURNS AND/OR SCALDING.
DANGER
DO NOT LET CHILDREN DISCONNECT THE DISHWASHER; CLOSE SUPERVISION OF
CHILDREN IS ALWAYS IMPORTANT AROUND APPLIANCES.
NOTE:
Hard water conditions will adversely affect the washing performance of your dishwasher. Hard
water conditions will also contribute to 'lime' (white lm substance) deposits and/or 'scaling' on the
stainless steel surface of the dishwasher tub and heater element, located in the sump underneath
the removable lter screen. To assist in minimizing these conditions, it is recommended to
periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of white vinegar at least
once a week.
Disconnecting the Dishwasher
1. Turn off water supply at the faucet.
2. Disconnect the power supply cord.
3. Release water pressure inside the inlet hose. Press and hold the red Pressure Relief Valve until
the ow of water stops.
4. Disconnect the Quick Connect assembly by pulling down on the locking collar and release from
Faucet Adapter.
5
Loading...