SUNON ME40100V1-000U-G99 Specification

2010.08.20

SUNON

SPECIFICATION FOR APPROVAL

CUSTOMER

MOTOR TYPE

DESCRIPTION

DIMENSIONS :

M O D E L

SUNON SPEC. NO.

CUSTOMER
APPROVAL NO.
APPROVED BY
CUSTOMER

(AUTHORIZED)

:

:

: MagLev Motor Fan

40X40X10 mm

: ME40100V1-000U-G99

D04077420G-00

:

:

:

SPEC.NO D04077420G-00

DRAWN

建準電機工業股份有限公司

SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.

NO. 30, LN. 296, XINYA RD., QIANZHEN DIST., TEL:[phone]

KAOHSIUNG CITY 80673, TAIWAN (R.O.C) FAX:[phone]

URL:http://www.sunon.com

Jodi

05/24

CHECKED

Kiddy

APPROVED

建 準 電 機

SUNONWEALTH

Page 1 of 16

Meijung

E-mail: [e-mail]

ISSUE DATE 05.24.2010

EDITION 0

REVISION DATE

E.SPEC E10900481

2010.08.20

I. MODEL NUMBERING SYSTEM

ME

Series Code

0

Voltage

0: 5VDC
1: 12VDC
2: 24VDC
3: 36VDC

V

1

Speed

X:Super High
1: High
2: Medium
3: Low

-

000U40 10

-

Customer Code

G99

Function Code

編碼 尺寸(mm) 編碼 尺寸(mm) 編碼 尺寸(mm) 編碼 尺寸(mm)
01~09 1~9 A0~A9 100~109 K0~K9 200~209 V0~V9 300~309
10~19 10~19 B0~B9 110~119 L0~L9 210~219 W0~W9 310~319
20~29 20~29 C0~C9 120~129 M0~M9 220~229 X0~X9 320~329
30~39 30~39 D0~D9 130~139 N0~N9 230~239 Y0~Y9 330~339
40~49 40~49 E0~E9 140~149 P0~P9 250~259 Z0~Z9 340~349
50~59 50~59 F0~F9 150~159 Q0~Q9 260~269
60~69 60~69 G0~G9 160~169 R0~R9 270~279
70~79 70~79 H0~H9 170~179 S0~S9 280~289
80~89 80~89 I0~I9 180~189 T0~T9 290~299
90~99 90~99 J0~J9 190~199 U0~U9 290~299

4: 48VDC

Thickness Size

Bearing

V: Vapo
B: 2 Ball
O: 1Ball
S: Sleeve

建 準 電 機

SUNONWEALTH

Page 2 of 16

II. SPECIFICATION

2010.08.20

1. MECHANICAL CHARACTERISTIC

MOTOR DESIGN

BEARING SYSTEM

DIMENSIONS

MATERIALS OF FRAME

MATERIALS OF FAN BLADE

DIRECTION OF ROTATION

MOUNTING HOLES

WEIGHT

2 phases, 4-poles Brushless DC motor

Vapo bearing system

See Page 6

Thermoplastic PBT of UL 94V-0

Thermoplastic PBT of UL 94V-0

Counter-clockwise viewed from front of fan blade

Diameter 4.3 mm in 4 holes

13.5 g

2. ELECTRIC CHARACTERISTIC

RATED VOLTAGE

RATED CURRENT

RATED POWER CONSUMPTION

OPERATING VOLTAGE RANGE

STARTING VOLTAGE

OPERATING TEMPERATURE RANGE

STORAGE TEMPERATURE RANGE

5 VDC

215 mA / Max. 248 mA

1.08 WATTS / Max. 1.24 WATTS

3.5~6 VDC

3.5 VDC (25 deg. C POWER ON/OFF)

-10 to + 70 deg. C

-40 to + 70 deg. C

建 準 電 機

SUNONWEALTH

Page 3 of 16

3. PERFORMANCE CHARACTERISTIC

2010.08.20

RATED SPEED 7000 RPM ± 15% at rated voltage

AIR FLOW

STATIC PRESSURE 0.19 Inch-H

ACOUSTIC NOISE

AIR FLOW V.S. PRESSURE See Page 5

INSULATION CLASS UL Class A

INSULATION RESISTANCE

PLASTIC HOUSING

DIELECTRIC STRENGTH Applied AC 500V for one minute or AC 600 V for 2

LIFE EXPECTANCY 60,000 Hours at 40 deg. C, 65% humidity, 90% CL.

PROTECTION

8.0 CFM

O

2

32 dB(A)

10M ohm at 500 VDC between internal stator and
lead wire (+)

Seconds between housing and lead wire (+)

Automatic Restart

Note: In a situation where the fan is locked by an external
force while the electricity is on, an increase in coil
temperature will be prevented by temporarily turning off the
electrical power to the motor. The fan will automatically
restart when the locked rotor condition is released.

Polarity Protection

4. SAFETY

SAFETY UL CUR TUV

NO. E77551 E77551



建 準 電 機

SUNONWEALTH

Page 4 of 16

2010.08.20

MODEL :ME40100V1-000U-G99

PERFORMANCE CURVES

STATIC
PRESSURE

mm-H2O Inch-H2O

6

4

0.20

5 VDC

2

0

0.10

0 5 10
0 0.141 0.282

建 準 電 機

SUNONWEALTH

Page 5 of 16

CFM

3

m

/min

2010.08.20

DIMENSIONS

建 準 電 機

SUNONWEALTH

Page 6 of 16

2010.08.20

LABEL

BLACK WORD
COLOR :SILVER

BLACK WORD
COLOR:PANTONE 347C

GREEN

ME40100V1-000U-G99

DC5V

TUV

Rheinland

Product Saf e ty

1.08W

EP

BLACK WORD
COLOR :SILVER

DA TE CODE

建 準 電 機

SUNONWEALTH

Page 7 of 16

2010.08.20

T4T3T2 T1

T=1 Rotation

T=T1+T2+T3+T4 =(1 Rotation)

T1=T2=T3=T4=

建 準 電 機

SUNONWEALTH

Page 8 of 16

60

4  rpm

FAN 3rd WIRE SIGNAL

2010.08.20

V

H

V

L

t3t3t3t

I

R

Run

3

S

I

t

1

t

2

t

2

Locked

3rd wire signal
Run : Square Wave
Locked : V

H

or

V

L

t3: F Type has open collector circuit
designed for RPM measurement

Vcc

1/4

t

1

Vce(sat)

DC FAN

Run

(+)
3

rd

(-)

R

L

Locked

建 準 電 機

SUNONWEALTH

Page 9 of 16

Ic

Vcc

Vcc=VCC(Max)
Ic=4mA(Max)
R

L

Vcc/Ic

≧

III. OTHER SPECIFIED TESTING

2010.08.20

The following is a general description of certain tests that are performed on
representative Sunon fans. Nothing in this document is intended to suggest that these
tests are performed on every model of Sunon fan. Moreover, the descriptions that follow
each test are meant only to provide a general explanation of each test. If you would like a
more detailed explanation as to any test identified in this Section, Sunon can provide
such an explanation upon request.

1. DROP PROOF TEST

Fans are packaged in a standard size shipping box and are dropped to the ground from

certain heights and angles depending on the weight of the particular box.

2. HUMIDITY PROOF TEST

The fan is operated for 96 continuous hours in an environment with humidity of 90% to

95% RH at 60°C  2°C.

3. VIBRATION PROOF TEST

Vibration with an amplitude 2mm and a frequency of 5-55-5hz is applied in all 3

directions (X,Y,Z), in cycles of 1 hour each, for a total vibration time of 3hours.

4. THERMAL CYCLING TEST

The fan is operated in a testing chamber for 50 cycles. In each cycle, the temperature is

gradually increased from -10°C to 70°C for 90 minutes, and subsequently operated at

70°C for 120 minutes. The temperature is then gradually decreased from 70°C to -10°C

for 90 minutes, and subsequently operated at -10°C for 120 minutes.

5. SHOCK PROOF TEST

100G of force is applied in the 3 directions (X,Y, and Z) for 2 milliseconds each.

6. LIFE EXPECTANCY
The “Life Expectancy” of SUNON fans is determined in SUNON’s reliability test
laboratory by using temperature chambers. The “Life Expectancy” of this fan has not
been evaluated for use in combination with any end application. Therefore, the Life
Expectancy Test Reports (L10 and MTTF Report) that relate to this fan are only for
reference.

建 準 電 機

SUNONWEALTH

Page 10 of 16

IV. CHARACTERISTIC DEFINITION

2010.08.20

The following is a general description of certain tests that are performed on
representative Sunon fans in order to determine the specifications of the fan. Nothing in
this document is intended to suggest that these tests are performed on every model of
Sunon fan. Moreover, the descriptions that follow each test are meant only to provide a
general explanation of each test. If you would like a more detailed explanation as to any
test identified in this Section, Sunon can provide such an explanation upon request.

1. ACOUSTICAL NOISE

Measured in a semi-anechoic chamber with background noise level below 15dB(A).

1 METER FROM MICROPHONE TO FAN INTAKE

The fan is running in free air under shaft horizontal condition with the microphone at
distance of one meter from the fan intake.

2. INPUT POWER

Measured after continuous 10 minute operation at rated voltage in clean air
( STATIC PRESSURE=0), and at ambient temperature of 25 degrees C under shaft
horizontal condition.

3. RATED CURRENT

Measured after continuous 10 minute operation at rated voltage in clean air
( STATIC PRESSURE=0), and at ambient temperature of 25 degrees C under shaft
horizontal condition.

建 準 電 機

SUNONWEALTH

Page 11 of 16

4. RATED SPEED

2010.08.20

Measured after continuous 10 minute operation at rated voltage in clean air
( STATIC PRESSURE=0), and at ambient temperature of 25 degrees C under shaft
horizontal condition.

5. STARTING VOLTAGE

Measured the voltage which enables to start the fan in the clean air (static pressure = 0 )
by switching on at the voltage under shaft horizontal condition. It is not at continuously
increasing voltage adjustment.

6. LOCKED ROTOR CURRENT

Measured immediately after the fan blade is locked.

7. AIR FLOW AND STATIC PRESSURE

The performance specification of air flow and static pressure shown in this specification for
approval is measured using the exhaust method. A double chamber is used in accordance
with AMCA 210 standard or DIN 24163 specification . The values are recorded when the
fan speed has stabilized at rated voltage.

8. INSULATION RESISTANCE

1. PLASTIC HOUSING:
(1) Measured between internal stator and lead wire(+).
(2) Measured between housing and lead wire(+).

2. ALUMINIUM HOUSING:
Measured between internal stator and lead wire(+).

9. DIELECTRIC STRENGTH

Measure between housing and lead wire(+).

建 準 電 機

SUNONWEALTH

Page 12 of 16

V. NOTE

2010.08.20

Ⅰ

.SAFETY

1. DO NOT use or operate this fan in excess of the limitations set forth in this
specification. SUNON is not be responsible for the non-performance of this fan
and/or any damages resulting from its use, if it is not used or operated in accordance
with the specifications.

2. SUNON recommends adding a protection circuit to the product or application in
which this fan is installed, such as a thermo-fuse, or current-fuse or thermo-protector.
The failure to use such a device may result in smoke, fire, electric shock by
insulation degradation in cases of motor lead short circuit, overload, or over voltage,
and/or other failure.

3. SUNON recommends installing a protection device to the product or application in
which this fan is installed if there is a possibility of reverse-connection between
VDC (+) and GND (-). The failure to install such a device may result in smoke, fire,
and/or destruction, although these conditions may not manifest immediately.

4. This fan must be installed and used in compliance with all applicable safety
standards and regulations.

5. Use proper care when handling and/or installing this fan. Improper handling or
installation of this fan may cause damage that could result in unsafe conditions.

6. Use proper care during installation and/or wiring. Failure to use proper care may
cause damage to certain components of the fan including, but not limited to, the coil
and lead wires, which could result in smoke and/or fire.

7. DO NOT use power or ground PWM to control the fan speed. If the fan speed needs
to be adjusted, please contact Sunon to customize the product design for your
application.

8. For critical or extreme environments, including non stop operation, please contact
Sunon and we will gladly provide assistance with your product selection to ensure an
appropriate cooling product for your application.

建 準 電 機

SUNONWEALTH

Page 13 of 16

II. SPECIFICATION MODIFICATION

2010.08.20

1. SUNON offers engineering assistance on fan installation and cooling system design.

2. All changes, modifications and/or revisions to the specifications, if any, are
incorporated in the attached specifications.

3. No changes, modifications and/or revisions to these specifications are effective
absent agreement, by both Sunon and the customer, in writing.

4. This fan will be shipped in accordance with the attached specification unless
SUNON and the customer have agreed otherwise, in writing, as specficied in
Paragraph 3, above.

III. OTHER

1. When building your device, please examine thoroughly any variation of EMC,
temperature rise, life data, quality, etc. of this product by shock/drop/vibration
testing, etc. If there are any problems or accidents in connection with this product, it
should be mutually discussed and examined.

2. Use proper care when handling this fan. Components such as fan holders or bearings
may be damaged, if touched with fingers or other objects. Additionally, static
electricity (ESD) may damage the internal circuits of the fan.

3. DO NOT operate this fan in proximity to hazardous materials such as
cyanogens, formalin, phenol, or corrosive gas environments including, but not
limited to, H2S, SO2, NO2, or Cl2.

4. SUNON recommends that you protect this fan from exposure to outside elements
such as dust, condensation, humidity or insects. Exposure of this fan to outside

organic silicon,

elements such as dust, condensation, humidity or insects may affect its performance
and may cause safety hazards. SUNON does not warrant against damage to the
product caused by outside elements.

5. This fan must be installed properly and securely. Improper mounting may cause
harsh resonance, vibration, and noise.

建 準 電 機

SUNONWEALTH

Page 14 of 16

6. Fan guards may prevent injury during handling or installation of the fan and are

2010.08.20

available for sale with this fan.

7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient
temperature and sixty-five percent (65%) relative humidity.

8. DO NOT store this fan in an environment with high humidity. This fan must be
stored in accordance with the attached specifications regarding storage temperature.
If this fan is stored for more than 6 months, SUNON recommends functional testing
before using.

9. SUNON reserves the right to use components from multiple sources at its discretion.
The use of components from other sources will not affect the specfications as
described herein.

10. The “Life Expectancy” of this fan has not been evaluated for use in combination
with any end application. Therefore, the Life Expectancy Test Reports (L10 and
MTTF Report) that relate to this fan are only for reference.

VI. WARRANTY

This fan is warranted against all defects which are proved to be fault in our
workmanship and material for one year from the date of our delivery. The sole
responsibility under the warranty shall be limited to the repair of the fan or the
replacement thereof, at SUNON’s sole discretion. SUNON will not be responsible for
the failures of its fans due to improper handing, misuse or the failure to follow
specifications or instructions for use. In the event of warranty claim, the customer shall
immediately notify SUNON for verification. SUNON will not be responsible for any
consequential damage to the customer’s equipment as a result of any fans proven to be
defective.

建 準 電 機

SUNONWEALTH

Page 15 of 16

2010.08.20

Declaration of RoHS

Control declaration of environment-related substances/materials

1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive,

Sunon product have complied with law and discipline not to employ the forbidden
substances, and restrict the allowable concentration of some limited substances
deliberately in our components.

No Substance Criteria

1

CFCs & HCFCs (ozone depleting substances) Forbidden

2

Chlorinated Organic Solvent Forbidden

Plastic (Frame, Impeller, wire harness, etc.) <100ppm

Solder <1000ppm

3

Lead and its compounds

Steel alloy <3500ppm

Aluminium alloy <4000ppm

Copper alloy <4wt%

Solder <20ppm

4

Cadmium and its compounds

5

PBBs and PBDEs Forbidden

6

PCB and PCT Forbidden

7

CP, Short-chain Chlorinated paraffins C10-13, Cl ≥48 wt% Forbidden

8

Mirex Forbidden

9

PCN Forbidden

10

Hexavalent Chromium compounds <100ppm

11

Mercury and its compounds Forbidden

12

Asbestos Forbidden

13

Organic Tin compounds Forbidden

14

Azo compounds Forbidden

15

TBBP-A in external case plastic parts of products (PCB is exempted) <1000ppm

16

Nickel in external case parts, which are likely to result in prolonged skin exposure <1000ppm

Parts composed of metals containing zinc

<100ppm

(e.g. brass, zinc for die casting)

Plastic <5ppm

建 準 電 機

SUNONWEALTH

Page 16 of 16