Sunny Health & Fitness SF-T1407M User Manual
MANUAL WALKING TREADMILL
USER MANUAL
SF-T1407M
IMPORTANT: Please read this manual carefully before using the product.
Retain owner’s manual for future reference. For Customer Service,
please contact: support@sunnyhealthfitness.com
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the
equipment are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine if
you have any medical or physical conditions that could put your health and safety at
risk or prevent you from using the equipment properly. Your physician’s advice is
essential if you are taking any medication that may affect your heart rate, blood
pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain,
tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness,
dizziness, or feelings of nausea. If you do experience any of these conditions, you
should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult
use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 2 feet of free space all
around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.
6. It is recommended that you lubricate all moving parts on a monthly basis.
7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from
the equipment during exercise, stop using the equipment immediately and don’t use
the equipment until the problem has been rectified.
8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that
may become entangled in the equipment.
9. Do not place fingers or objects into the moving parts of the equipment.
10. The maximum weight capacity of this unit is 220 pounds.
11. This equipment is not suitable for therapeutic use.
12. Move with caution when lifting and moving the equipment. Always use proper lifting
technique and seek assistance if necessary.
13. Your product is intended for use in cool, dry conditions. You should avoid storage in
extreme cold, hot, or damp areas as this may lead to corrosion and other related
problems.
14. This equipment is designed for indoor use only! It is not intended for commercial use!
1
EXPLODED DRAWING
2
No.
Description
Qty
No.
Description
Qty
1
Main frame
1
25
Adjustable feet pad
2 2 Running belt
1
26
Running decking
1
3L
Left flywheel cover
1
27
Front roller
1
3R
Right flywheel cover
1
28
Rear roller
1 4 Right upright support
1
29
Side rail
2
5
Left upright support
1
30
Anti-slip cloth
2
6
Handlebar
1
31L
Left side rail block
1
7
Decorated cover
2
31R
Right side rail block
1
8
Monitor
1
32
Feet cover
2 9 Monitor holder
1
33
Handlebar foam
2
10
Lock knob
1
34
End plug
2
11
Feet pad
2
35
Hexagon screw M8×40
2
12
Flat washer
6
36
Nylon nut M6
8
13
Philips head screw M4×15
6
37
Nylon nut M8
2
14
Philips head screw M5×10
4
38
nut M8
2
15
Hexagon bolt M10×20
2
39
Flat washer D12.5
2
16
Allen screw M8×35
4
40
Adjustable bolt M6*55
4
17
Carriage bolt M8×38
4
41
Philips head screw ST3.5*12
4
18
Arc washer D8
4
42
Wrench W/screw driver 13*14*15
1
19
Flat washer D10
2
43
Allen wrench S6
1
20
Domed nut M8
4
44
Allen wrench S5
1
21
Plug
3
45
Cross screw M6*45
8
22A
Lower sensor wire
1
46
Sensor wire
1
22B
Upper sensor wire
1
47
Transportation wheel
2
23
Base frame
1
48
Plate for rear roller
2
24L
Rear end cover L
1
49
Handlebar foam
2
24R
Rear end cover R
1
PARTS LIST
3
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the Left & Right Upright Supports (No. 4 and No. 5) to the Main Frame (No.
1) using 2 Flat Washers (No. 19) and 2 Hexagon Bolts (No. 15) and tighten
securely.
Screw the Lock Knob (No. 10) into the holes of the Right Upright Support (No. 4)
and Main Frame (No. 1).
Secure the Left and Right Flywheel Covers (No. 3/L and 3/R) to the Main Frame
(No. 1) using 4 Phillips Head Screws (No. 14).
Connect the Lower Sensor Wire (No. 22A) to Sensor Wire (No. 46).
NOTE: To complete steps that involve assembling heavy components, seek extra
assistance to help hold the components in place during installation.
STEP 2:
Secure the Right & Left Upright Supports (No. 4 and No.5) to the Base Frame (No.
23) using 4 Carriage bolts (No. 17), 4 Flat Washers (No. 12) and 4 Domed Nuts
(No. 20). Tighten securely.
ASSEMBLY INSTRUCTIONS
4
Loading...