Sunny SF-T7604 User Manuals

SF-T7604 TREADMILL

USER MANUAL

IMPORTANT: Read all instructions carefully before using this product.
Retain owner’s manual for future reference. For customer service, please
contact: [e-mail]

1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including
the following:

Read all instructions before using (this appliance).

DANGER – To reduce the risk of electric shock:

1. Always unplug this appliance from the electrical outlet immediately after using and before
cleaning.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. An appliance should never be left unattended when plugged in. Unplug from outlet when
not in use, and before putting on or taking off parts.

2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire,
electric shock, or injury to persons.

3. Close supervision is necessary when this appliance is used by, on, or near children,
invalids, or disabled persons.

4. Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water. Return the appliance to a service
center for examination and repair.

6. Do not carry this appliance by supply cord or use cord as a handle.

7. Keep the cord away from heated surfaces.

8. Never operate the appliance with the air openings blocked. Keep the air openings free of
lint, hair, and the like.

9. Never drop or insert any object into any opening.

10. Do not use outdoors.

11. Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.

12. To disconnect, turn all controls to the off position, then remove plug from outlet.

13. Connect this appliance to a properly grounded outlet only. See Grounding Instructions.

CAUTION: Risk of Injury to Persons:

1. To Avoid Injury, use extreme caution when stepping onto or off of a moving belt. Read
Instruction Manual Before Using.

SAVE THESE INSTRUCTIONS

2

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the
equipment are informed of all warnings and precautions.

1. Before starting any exercise program you should consult your physician to determine if
you have any medical or physical conditions that could put your health and safety at risk

or prevent you from using the equipment properly. Your physician’s advice is essential if

you are taking any medication that may affect your heart rate, blood pressure, or
cholesterol level.

2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your
chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of
nausea. If you do experience any of these conditions, you should consult your physician
before continuing with your exercise program.

3. Keep children and pets away from the equipment. The equipment is designed for adult
use only.

4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 2 feet of free space all
around it.

5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.

6. It is recommended that you lubricate all moving parts on a monthly basis.

7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from the
equipment during exercise, stop using the equipment immediately and don’t use the
equipment until the problem has been rectified.

8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.

9. Do not place fingers or objects into the moving parts of the equipment.

10. The maximum weight capacity of this unit is 265 pounds.

11. This equipment is not suitable for therapeutic use.

12. Move with caution when lifting and moving the equipment. Always use proper lifting
technique and seek assistance if necessary.

13. Your product is intended for use in cool, dry conditions. You should avoid storage in
extreme cold, hot, or damp areas as this may lead to corrosion and other related
problems.

14. This equipment is designed for indoor household use only! It is not intended for
commercial use!

3

IMPORTANT OPERATION INSTRUCTIONS

1. Insert the power plug directly into the socket.

2. The constant running time for this machine is less than 2 hours. Be sure to read the

manual before operating the equipment.

3. Changes in speed do not occur immediately. Set your desired speed using the

adjustment keys on the main console. The speed will increase gradually.

4. While on the treadmill, move with caution as distractions may cause you to lose

balance and stray from walking in the center of the belt which may result in serious
injury.

5. This unit starts at a very low speed. The proper way to begin use is to stand on the

side rails during its acceleration, then step onto the belt once it’s in constant motion.

6. Always hold the handrail when making control changes.

7. A safety key is provided for emergency use. Operation to the machine can only be

done if the safety key is inserted into the computer console. In case of emergency,
remove the safety key to immediately stop the belt and shut off the treadmill. The
display screen will reset once the safety key is reinserted.

8. The console control keys are precisely set and requires very little finger pressure to

use. To avoid damaging these keys, do not use excessive pressure when operating
these controls.

9. This equipment is designed of adult use only! Children should not be allowed to use

or play near this equipment. When present, children should be supervised at all
times by an adult.

10. Women who are pregnant or nursing should consult a physician before attempting to
begin any exercise program.

11. Always stay hydrated during and after an exercise.

IMPORTANT NOTE:

The belt must be lubricated before the first use! Please see Page 12 for
instructions on how to properly apply lubricant.

4

EXPLODED DRAWING

PARTS LIST

No.

Description

Specification

Qty

No.

Description

Specification

Qty

A01

Base Frame

1

C24

Flat foot pad

6

A02

Main Frame

1

C25

Cone-shape cushion

1

A03

Computer Bracket

1

C26

Quick button

1

A04

Left Upright

1

C27

Function button

1

A05

Right Upright

1

C28

Start button

1

A06

Motor Bracket

1

C29

Stop button

1

A07

Safety block

1

C30

Adjustable rubber pad

2

B01

Front Roller

1

C31

Rubber pad

2

B02

Rear Roller

1

C32

Cushion

4

B03

Air Pressure Cylinder

1

C33

Plate

2

B04

Allen Wrench

5mm

1

D01

Console

1

B05

Spanner w/ screw driver

S=13,14,15

1

D02

Control board

1

B06

Bushing

2

D03

Upper Signal Wire

1

B07

Transport wheel plug

4

D04

Lower Signal Wire

1

B08

Left speaker net

1

D05

Hand pulse upper wire

1

B09

Right speaker net

1

D06

Hand pulse lower wire

2

B10

Fixing Pin

2

D07

Panel connecting wire

1

C01

Console top cover

1

D08

Key board connecting wire

1

C02

Console bottom cover

1

D09

Sensor

1

C03

Console Panel

1

D10

Safety key sensor

1

C04

Motor top cover

1

D11

Safety key

1

C05

Motor bottom cover

1

D12

Hand pulse with on/off

1

C06

Left rear cover

1

D13

Hand pulse with speed

1

C07

Right rear cover

1

D14

AC signal wire

1

C08

Left Upright cover

1

D15

AC signal wire

2

C09

Right Upright cover

1

D16

AC signal wire

1

C10

Side rail

2

D17

AC signal wire

1

C11

Running belt

1

D18

Grounding wire

1

C12

Foam

2

D19

Power wire

1

C13

Pipe end cap

2

D20

Power outlet

1

C14

Computer acrylic

1

D21

Square switch

1

C15

Motor belt

1

D22

Overload Protector

1

C16

Transport wheel

2

D23

Magnetic Ring

1

C17

Adjustable foot pad

2

D24

Magnetic Core

1

C18

Water bottle holders

2

D25

DC motor

1

C19

Plastic pad

2

D26

Running deck

1

C20

Ring Protecting Wire Plug

2

D27

Transformer

1

C21

Black Cushion

4

D28

Filter

1

C22

Blue Cushion

2

D29

AC signal wire

1

C23

Blue Cushion

2

D30

AC signal wire

1

5

D31

Anti-slip pad

2

E16

Bolt

M5*16

6

E01

Nut

M6

2

E17

Bolt

M5*12

8

E02

Nut

M8

6

E18

Bolt

M5*8

13

E03

Nut

M10

2

E19

Screw

ST4.2*55

2

E04

Bolt

M10*30

2

E20

Screw

ST4.2*30

4

E05

Bolt

M8*80

2

E21

Screw

ST4.2*12

20

E06

Bolt

M8*70

2

E22

Bolt

ST4.2*12

25

E07

Bolt

M8*38

2

E23

Bolt

ST2.9*8

6

E08

Bolt

M8*45

3

E24

Bolt

ST2.9*6

27

E09

Bolt

M8*30

1

E25

Bolt

ST2.5*6

2

E10

Bolt

M8*20

4

E26

Washer

6

3

E11

Bolt

M8*15

13

E27

Washer

8

16

E12

Bolt

M8*45

2

E28

Washer

8

6

E13

Bolt

M6*55

3

E29

Washer

8

7

E14

Bolt

M6*35

2

E30

Screw

φ10*φ26*2.0

4

E15

Bolt

M6*25

6

E31

Bolt

M5*12

2

6

No.

Description

Specification

Qty

No.

Description

Specification

Qty

A

Main Frame

1

C08

Left Upright Tube Cover

1

E11

Bolt

M8*15

10

C09

Right Upright Tube Cover

1

E17

Bolt

M5*12

6

C18

Water Bottle Holder

2

E27

Washer

8

10

D19

Power wire

1

B04

Allen Wrench

5mm

1 H Lubricant Oil

1

B05

Spanner w/ Screw Driver

S=13,14,15

1

7

CARTON CONTENTS:

ASSEMBLY HARDWARE

Spanner with Screw Driver (S=13, 14, 15) – 1PC

ASSEMBLY TOOLS

Allen Wrench (5mm) – 1PC