Sunny SF-RW5515 User Manual
MAGNETIC ROWING MACHINE
SF-RW5515
USER MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain owner’s
manual for future reference. For customer service, please contact:
support@sunnyhealthfitness.com
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the equipment
are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk or
prevent you from using the equipment properly. Your physician’s advice is essential if you
are taking any medication that may affect your heart rate, blood pressure, or cholesterol
level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your
chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of
nausea. If you do experience any of these conditions, you should consult your physician
before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use
only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 2 feet of free space all around
it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.
6. It is recommended that you lubricate all moving parts on a monthly basis.
7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from the
equipment during exercise, stop using the equipment immediately and don’t use the
equipment until the problem has been rectified.
8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
9. Do not place fingers or objects into the moving parts of the equipment.
10. The maximum weight capacity of this unit is 250 pounds.
11. This equipment is not suitable for therapeutic use.
12. Move with caution when lifting and moving the equipment. Always use proper lifting
technique and seek assistance if necessary.
13. Your product is intended for use in cool, dry conditions. You should avoid storage in
extreme cold, hot, or damp areas as this may lead to corrosion and other related problems.
14. This equipment is designed for indoor use only! It is not intended for commercial use!
1
EXPLODED DRAWING
2
No.
Description
Spec.
QTY
No.
Description
Spec.
QTY
1
Front stabilizer
1
44
Main frame
1 2 Washer
d8*Φ16*1.5
16
45
Trunk wire 1
1 3 Screw
M8*50*20*S6
2
46
Washer
d12*Φ24*2
1 4 End cap
2
47
Knob
M12
1 5 Nut
M8*H7.5*S13
3
48
Bolt
M12 *Φ12.5*160*23*S19
4 6 Screw
ST4.2*25*Φ10.5
4
49
Pedal L/R
2 7 Handlebar
1
50
Pedal strap
2 8 Foam grip
Φ23*3*180
2
51
Magnet
Φ15*7
1 9 End cap
Φ25*16
2
52
Spring washer
d8
8
10
Left chain cover
1
53
Wheel
Φ40*92
3
11
Screw
ST4.2*19*Φ8
11
54
Casing pipe for idler wheel
Φ14*Φ8*78
3
12
Screw
ST4.2*16*Φ8
6
55
Bearing
608Z
6
13
Computer
1
56
Rubber pad
M8*H5.5*S14
1
14
Tension control
1
57
Right chain cover
1
15
Washer
D5
1
58
Bolt
Φ10*95*M6*25
1
16
Screw
M5
1
59
Screw
M6*16*S5
1
17
Nut
M10*1*H8*S15
4
60
Pull pin
Φ8*100*105
1
18
Nut
M10*1*H5*S17
4
61
Sensor wire
1
19
Cover for mesh belt wheel
Φ149*14
1
62
Sliding rail
1
20
Outer PC board
1
63
Screw
M6*16*Φ12
4
21
Volute spring
1
64
Washer
d6*Φ16*1.5
4
22
Axle for mesh belt wheel
1
65
Limit mat
Φ33*Φ8*13
4
23
Bearing
6000-ZZ
4
66
Limit axle
Φ12*80*M6
2
24
PC board
1
67
Grommet
Φ12*11*Φ3
1
25
Fixing axle for mesh belt
Φ5*32
1
68
End cap
J80*40*18
1
26
Mesh belt wheel
1
69
Rear support
1
27
Belt wheel
1
70
End cap
2
28
Bolt
M6*55*S10
3
71
Saddle
DDPU986
1
29
Circlip
d10
1
72
Screw
M8*16*S6
8
30
Bolt
M10*60*25*S17
1
73
Bolt
M8*125*15*S14
3
31
Spacer
Φ14*Φ10*2.5
2
74
U shape baffle
2
32
Spacer
Φ15*Φ10.2*19
1
75
Left seat supporting board
1
33
Mesh belt pulley
Φ45*35
1
76
Right seat supporting board
1
34
Washer
d10*Φ20*2
1
77
Spacer
d8*Φ15*4
6
35
Nut
M10*H9.5*S17
1
78
Spanner
S17-19
1
36
Handlebar seat
1
79
Allen wrench
S5
1
37
Screw
M5*10*Φ10
2
80
Allen wrench
S6
1
38
Mesh belt
t1.3*18*2140
1
81
Spanner
S13-14-15
1
39
Belt
6PJ250
1
40
Inertial wheel
Φ176
1
41
Adjusting screw
M6*40*Φ10*2.5
4
42
Adjusting U seat
30*10*1.5
4
43
Nut
M6*H6*S10
7
PARTS LIST
3
HARDWARE PACKAGE
4
Loading...