Sunny SF-RB4417 User Manual
MAGNETIC RECUMBENT BIKE
SF-RB4417
USER MANUAL
IMPORTANT: Please read this manual carefully before using the product. Retain
owner’s manual for future reference. For Customer Service, please contact:
support@sunnyhealthfitness.com
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the
equipment are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine if
you have any medical or physical conditions that could put your health and safety at
risk or prevent you from using the equipment properly. Your physician’s advice is
essential if you are taking any medication that may affect your heart rate, blood
pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain, tightness
in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or
feelings of nausea. If you do experience any of these conditions, you should consult
your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult
use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 2 feet of free space all
around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.
6. It is recommended that you lubricate all moving parts on a monthly basis.
7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from
the equipment during exercise, stop using the equipment immediately and don’t use the
equipment until the problem has been rectified.
8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that
may become entangled in the equipment.
9. Do not place fingers or objects into the moving parts of the equipment.
10. The maximum weight capacity of this unit is 300 pounds.
11. This equipment is not suitable for therapeutic use.
12. Move with caution when lifting and moving the equipment. Always use proper lifting
technique and seek assistance if necessary.
13. Your product is intended for use in cool, dry conditions. You should avoid storage in
extreme cold, hot, or damp areas as this may lead to corrosion and other related
problems.
14. This equipment is designed for indoor use only! It is not intended for commercial use!
1
2
No.
DESCRIPTION
QTY
No.
DESCRIPTION
QTY
1
Computer (wire 1a and 1b)
1
27
Seat cushion 245
1
2
Screw M5*10
2
28
Backrest cushion 246
1
3
Front upright tube
1
29
Screw M8*45*20*S6
3
4
Upper sensor wire 1
1
30
Spring washer d8
8
5A
Tension control
1
31
Washer d8*16*1.5
17
5B
Tension cable
1
32
Bumper 22*18*16*4
2
6
Arc washer d8*20*2*R30
6
33
Screw M4*16*6
2
7
Screw M5*16*S6
12
34
Washer d4*9.1
2
8
Screw M5*15
1
35
Nut M8*H7.5*S14
1
9
Arc washer d5
1
36
Screw M8*40*20*S6
2
10
Tension wire
1
37
End cap J53*23*11
1
11
Sensor wire
1
38
Upper sensor wire 2
1
12
Main frame
1
39
End cap 25*16
2
13
Front stabilizer
1
40
Handle pulse for tube 25
2
14
End cap
2
41
Washer d6*12.1
2
15
Carriage bolt M8*60*20*H5
6
42
Screw ST4*19*7
2
16
Screw ST4*10*6
2
43
Foam grip 23*5*500
2
17L/R
Pedal L/R
2
44
Handlebar
1
18
Nut M8*H16*S13
6
45
Hand pulse wire
1
19
Bushing J60*30*J53*23*L100*8.5
2
46
Grommet
2
20
Seat support tube
1
47
Lower sensor wire 1
1
21
Curve support tube
1
48
Adjustment knob
1
22
Backrest frame
1
49
Lower sensor wire 2
1
23
Rear support tube
1
50
Allen wrench S6
1
24
Rear stabilizer
1
51
Spanner S13-14-15
1
25
End cap 50*45.5*64.5*64.5
2
52L/R
Crank arms (left and right)
1
26
End cap F38*38*14
2
PARTS LIST
3
Loading...