Sunny SF-E902 User Manual

SF-E902

Edited with the trial version of
Foxit Advanced PDF Editor

To remove this notice, visit:

www.foxitsoftware.com/shopping

IMPORTANT!
Please read these instructions carefully before use.

For Customer Service, please contact: [e-mail]

Important Safety Information

Edited with the trial version of
Foxit Advanced PDF Editor

To remove this notice, visit:

www.foxitsoftware.com/shopping

1

We thank you for choosing our product. To guarantee your safety and health, please use this equipment
correctly. Please read the information below carefully before using this equipment.

1. It is important to read this entire manual before assembling and using the equipment. Safe and effective
use can only be achieved if the equipment is assembled, maintained and used properly.

2. Before starting any exercise program you should consult your doctor to determine if you have any

medical or physical conditions that could put your health and safety at risk, or prevent you from using
the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your
heart rate, blood pressure or cholesterol level.

3. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop

exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do
experience any of these conditions you should consult your doctor before continuing with your exercise
program.

4. Keep children and pets away from the equipment. The equipment is designed for adult use only.

5. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure
safety, the equipment should have at least 1.7 feet of free space all around it.

6. Before using the equipment, check that the nuts and bolts are securely tightened. Always use the
equipment as indicated. If you find any defective components while assembling or checking the

equipment, or if you hear any unusual noises coming from the equipment during use, stop immediately.
Do not use the equipment until the problem has been rectified.

7. There are many functions of the computer; the data will show when using the equipment and will display
information about your exercise routine.

8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in
the equipment or that may restrict or prevent movement.

9. This equipment is designed for indoor and home use only, not intended for commercial use.

10. Care must be taken when lifting or moving the equipment so as not to injure your back.

11. The equipment is not suitable for therapeutic use.

12. Maximum weight of user: 220LB

13. Please save this manual and the assembling tools as well.

EXERCISE INSTRUCTIOOONS:

Edited with the trial version of
Foxit Advanced PDF Editor

To remove this notice, visit:

www.foxitsoftware.com/shopping

2

NO

Parts

QTY

Stand behind your AIR WALK, with both hands on the handlebar assembly, place your right foot on the right
pedal, and carefully move your left foot and place it on the left f oot pedal. Make sure you are balanced, using
smooth and controlled movements.

ASSEMBLY INSTRUCTIONS:

Edited with the trial version of
Foxit Advanced PDF Editor

To remove this notice, visit:

www.foxitsoftware.com/shopping

3

Main frame (part 7)

Pull out the support
tube

Insert the abdominal
support (part 8)

Remove the pin
(part 10)

Insert the pin (part 6)
to secure it

Fasten using screws
(part 9)

Remove the pin
(part 6)

Move the pedals
down

Insert the pin
(part 10)

Assemble the arm
(part 2)

Insert the screws
(part 3)

Fasten the screws
securely using nuts

(part 5) with washers
(part 4)

Attach the
computer (part 1)

Assembly is done

COMPUTER FUNCTIONS:

Edited with the trial version of
Foxit Advanced PDF Editor

To remove this notice, visit:

www.foxitsoftware.com/shopping

4

:

:

:

:::

Function Button : Press red button to select functions of time, count, total count, calories. Hold the
button for 4 seconds to have a total reset (except TOTAL COUNT).

SCAN : Press “mode” key to select “scan”. This function will automatically scan through all
the functions displayed on the bottom line of the monitor.
TIME : Automatically accumulates workout time when starting exercise.
COUNT : Automatically accumulates workout counts when starting exercise.
TOTAL COUNT : Automatically accumulates different sessions workout counts when starting
exercise. TOTAL COUNT will be reset by replace the battery.
CALS : Automatically accumulates calories amount consumed when starting exercise.

NOTE:

1. If there is an improper display on the monitor, please replace the battery to improve results.

2. Please use one AAA (1.5V) battery as a power supply.

3. The monitor will be automatically shut off if there is no signal coming in for 4 to 5 minutes.

4. The monitor will be auto-powered when you start to exercise, or you can push button to signal in.

5. When there is no signal coming in for a period of 4 seconds, all functions will automatically stop calculating
and a “stop” sign will appear on the upper left corner of the monitor.

6. The meter will automatically start calculating by simply starting to exercise and will automatically stop
calculating when exercise stops for 4 seconds.