Sunny SF-E3628 User Manual

MAGNETIC ELLIPTICAL TRAINER

SF-E3628

USER MANUAL

WARNING! Your elliptical trainer is not designed for reverse pedaling. Failure to comply
with this warning may result in permanent damage to your new equipment.

IMPORTANT! Read all instructions carefully before using this product. Retain owner’s
manual for future reference. For customer service, please contact:

[e-mail]

- 1 -

IMPORTANT SAFETY NOTICE

Note the following precaution before assembling and operating the machine.

1. Assemble the machine exactly as described in the instruction manual.

2. Check all the bolts, nuts and other connections before using the machine for the first time
to ensure the machine is in the safe condition.

3. Set up the machine in a dry level place and keep it away from moisture and water.

4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine in the
area of assembly to avoid dirt.

5. Before beginning exercise, remove all objects within a radius of 4 feet from the machine.

6. Do not use aggressive cleaning articles to clean the machine. Only use the supplied
tools or suitable tools of your own to assemble the machine or repair any parts of machine.
Remove drops of sweat from the machine immediately after finishing training.

7. Your health can be affected by incorrect or excessive training. Consult a doctor before
beginning the training program. This machine is not suitable for therapeutic purpose.

8. Only use the elliptical when it is working correctly. Use only original spare parts for any
necessary repairs.

9. This machine can be used by one person at a time.

10. Wear training clothes and shoes that are suitable for fitness training with the machine.
Do not wear clothing that could get tangled in the machine.

11. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop
training and consult a doctor immediately.

12. This elliptical is intended for adult use only. Keep children away from the elliptical.

13. Do not put fingers or objects in the moving parts of the machine.
14．Maximum user’s weight is 220 LBS.

- 2 -

EXPLODED DIAGRAM

- 3 -

PARTS LIST

NO.

DESCRIPTION

QTY

NO.

DESCRIPTION

QTY

1

Main frame

1

32

Nylon nut M8

2

2

Handlebar post

1

33

Hex bolt M10X45

4

3

Front stabilizer

1

34

Flat washer d10X1.5

6

4

Rear stabilizer

1

35

Nylon nut M10

6

5L/R

Pedal support (L/R)

1.pr

36

Nut cap S16

4

6L/R

Swing bar(L/R)

1.pr

37

Hex bolt M10X50

2

7L/R

Handlebar (L/R)

1.pr

38L/R

Pedal locking bolt (L/R)

1.pr

8

Armrest

1

39

Axle bushing Φ24 X20XΦ16.1

4

9

Computer

1

40L/R

Connecting joint (L/R)

1.pr

10L/R

Pedal (L/R)

1.pr

41

Spring washer Φ13 XB2

2

11

Front end cap

2

42L/R

Nylon nut (L/R)

1.pr

12

Carriage bolt M8XL74

4

43

Nut cap S19

2

13

Arc washer
d8X2XΦ20XR30

4

44

Arc washer Φ20 Xd8X2XR16

4

14

Acorn nut M8

8

45

Carriage bolt M8X40

4

15

Rear end cap

2

46

Mushroom end cap

2

16

Allen screw M8X16

4

47

Handlebar foam grip

2

17

Tension controller

1

48

Armrest foam grip

2

18

Extension wire

1

49

Round end cap Φ25X1.5

2

19

Tension cable

1

50

Pulse sensor wire

2

20

Sensor wire

1

51

Hex bolt M8X30

2

21

Cross screw M5X45

1

52

Spring washer D8

8

22

Crank

1

53

Handlebar chuck cover

1

23

Nut cap S14

4

54

Waveform washer
Φ20XΦ28X0.3

2

24

Hex bolt M8X15

2

55

Cross screw M4X12

4

25

Flat washer Φ8.2XΦ32 X2

2

56

Arc washer Φ20Xd8.5XR25

4

26

Axle bushing Φ32 X2.5

6

57

Nut cap S13

2

27

Long axle

1

58

Crossing tapping screw
ST3X10

2

28

Round end cap Φ28 X1.5

2

59

Flat washer D5

1

29

Square end cap
40X25X1.5

4

60

Tension controller cover

1

30

Hex bolt M8X55

2

61

Metal bushing Φ14X10XΦ10.1

4

31

Flat washer d8 X1.5

4

62

Waveform washer D17X0.3

2

NOTE:

Most of the listed assembly hardware has been packaged separately, but some hardware
items have been preinstalled in the identified assembly parts. In these instances, simply
remove and reinstall the hardware as assembly is required.

Please reference the individual assembly steps and make note of all preinstalled hardware.

PREPARATION: Before assembling, make sure that you will have enough space around
the item; Use the present tooling for assembling; Before assembling please check whether
all needed parts are available.

It is strongly recommended this machine to be assembled by two or more people to avoid
possible injury.