Sunny SF-E3416H User Manual
MAGNETIC ELLIPTICAL TRAINER
SF-E3416
USER MANUAL
IMPORTANT: Please read this manual carefully before using the product.
Retain owner’s manual for future reference. For Customer Service, please
contact: support@sunnyhealthfitness.com
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use
this equipment correctly. It is important to read this entire manual before assembling
and using the equipment. Safe and effective use can only be achieved if the equipment
is assembled, maintained and used properly. It is your responsibility to ensure that all
users of the equipment are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine
if you have any medical or physical conditions that could put your health and safety
at risk, or prevent you from using the equipment properly. Your physician’s advice is
essential if you are taking medication that affects your heart rate, blood pressure or
cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain,
tightness in your chest, irregular heartbeat, and extreme shortness of breath,
lightheadedness, dizziness or feelings of nausea. If you do experience any of these
conditions, you should consult your physician before continuing with your exercise
program.
3. Keep children and pets away from the equipment. The equipment is designed for
adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor
or carpet. To ensure safety, the equipment should have at least 2 feet of free space
all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment.
The safety of the equipment can only be maintained if it is regularly examined for
damage and/or wear and tear.
6. It is recommended that you lubricate all moving parts on a monthly basis.
7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming
from the equipment during exercise, stop using the equipment immediately and don’t
use the equipment until the problem has been rectified.
8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that
may become entangled in the equipment.
9. Do not place fingers or objects into moving parts of the exercise equipment.
10. The maximum weight capacity of this unit is 250 pounds.
11. The equipment is not suitable for therapeutic use.
12. You must take care of yourself when lifting and moving the equipment so as not to
injure your back. Always use proper lifting technique and seek assistance if
necessary.
13. This equipment is designed for indoor and home use only! It is not intended for
commercial use!
1
2
3
4
4
5
6
7
8
14
23
9
10
12
13R
14
12
13L
15
16
24
22
23
21
17
19
18
20
31
34
37
38
56
17
63
3
44
45
46
47
46
49
50
31
32
33
33
37
38
20
21
24
23
22
21
52A
53
29
25R
11
60
60
41
60
61
30
36
21
60
60
70
39
39
32
33
33
35
25L
41
41
60
61
48
49
46
46
70
40
17
56
63
41
44
62
56
63
34
16
62
43L
43R
55
55
64
54
54
54
54
35
47
66
67
68
69
1
27
28
28
51
51
65
19
29
19
29
57
58
59
29
19
17
19
18
42
26
26
38
63
38
56
37
37
71
52B
Please ADD Part
Numbers (5 & 6) to
the Drawing
Please
ensure that
all numbers
for parts are
the same
font and size
53
Please ADD Part Numbers
in RED to the Exploded
Drawing
EXPLODED DRAWING
2
Description
Qty
No.
Description
Qty
1
Computer
1
31
Bolt M8*65*30*S14
2
2
Middle handlebar
1
32
Spacer 14*8.3*48
2
3
Foam grip 23*5*445
2
33
Alloy wrap 1 32*3*28*16*14
4
4
End cap 25*16
2
34
Bolt M10*42*20*S17
2
5
Washer d6*Φ12*1
2
35
U shape plate
2
6
Screw ST4*19
2
36
Arc washer d6*Φ20*1.5*R30
1
7
Handle pulse sensor *25
2
37
Washer d8*Φ16*1.5
6
8
Screw M8*30*S6
2
38
Nylon nut M8*H7.5*S13
6
9
Handle pulse wire
1
39
Wave washer d19*Φ25*0.3
2
10
Upper sensor wire
1
40
Hinge bolt R Φ16*89*23*1/2*S8
1
11
Grommet 12*11*Φ3
1
41
End cap J40*25*15
4
12
Foam grip 26*5*510
2
42
Clamp cover
1
13L/R
Handlebar L/R
2
43L/R
Pedal
2
14
End cap 28*32*50
2
44
Bolt M10*50*13*S17
2
15
Screw M5*10
2
45
Hinge bolt L Φ16*89*23*1/2*S8
1
16
Bushing 32*25*L83
2
46
Alloy bushing 28*4*Φ24*12*16.1
4
17
Bolt M8*40*20*S14 Grade A
6
47
Link connector combination
2
18
Arc washer d8*Φ20*2*R16
2
48
Nylon nut R 1/2*20*H8*S19
1
19
Nut M8*H16*S13
6
49
Spring washer 1/2”
2
20
Long spacer 32*19.2*75.5
2
50
Nylon nut L 1/2*20*H8*S19
1
21
Alloy wrap 2 *32
4
51
End cap 50*45.5*64.5
2
22
Washer d8*Φ32*2
2
52A
Tension control
1
23
Spring washer d8
4
52B
Tension cable
1
24
Bolt M8*16*S14
2
53
Screw M8*16*S6
4
25L/R
Swing rod L/R
2
54
Alloy bushing 18*3*14*7*10.1
4
26
End cap 50*61*50
2
55
Connecting rod
2
27
Front stabilizer
1
56
Washer d10*Φ20*2.0
4
28
Carriage bolt M8*60*20*H5
4
57
Tension wire
1
29
Arc washer d8*Φ20*2*R30
8
58
Lower sensor wire
1
30
Screw M5*16
1
59
Main frame
1
PARTS LIST
3
No.
Description
Qty
No.
Description
Qty
60
Ball cap S13
6
66
Allen wrench S8
1
61
Ball cap S18
6
67
Allen wrench S6
1
62
Ball cap S16
2
68
Spanner S13-14-15
1
63
Nylon nut M10*H9.5*S17
2
69
Spanner S17-S19 (inner 17)
1
64
Handlebar post
4
70
Wave washer d17*Φ25*0.3
2
65
Rear stabilizer
1
71
Computer wire
1
PARTS LIST
NOTE: Most of the listed assembly hardware has been packaged separately, but some
hardware items have been preinstalled on the machine in. In these instances, simply
remove the hardware and reinstall the hardware as assembly is required.
4
Loading...