Sunny SF-B1203 User Manual

1. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is
assembled, maintained and used properly. It is your responsibility to ensure
that all users of the equipment are informed of all warnings and precautions.

2. Before starting any exercise program you should consult your physician to
determine if you have any medical or physical conditions that could put your
health and safety at risk, or prevent you from using the equipment properly.
Your physician's advice is essential if you are taking thatmedication

affects your heart rate, blood pressure or cholesterol level.

3. Be aware of your body’s signals. Incorrect or excessive exercise can
damage your health. Stop exercising if you experience any of the following
symptoms: pain, tightness in your chest, irregular heartbeat, extreme
shortness of breath, lightheadedness, dizziness or feelings of nausea. If you
do experience any of these
before continuing with your exercise program.

4. Keep children and pets away from the equipment, while it is in use. Do not
allow children to use the equipment.
only!

5. Use the equipment on a solid, flat, level surface with a protective cover for
your floor or carpet. To ensure safety, the equipment should have at least

1.5 feet of free space all around it.

6. Before using the equipment, check that the nuts and bolts are securely
tightened.

7. The safety of the equipment can only be maintained if it is regularly
examined for damage and/or wear and tear.

8. Always use the equipment as indicated. If you find any defective
components while assembling or checking the equipment, or if you hear any
unusual noises coming from the equipment during use, stop immediately.
Do not use the equipment until the problem has been rectified.

9. Wear suitable clothing while using the equipment. Avoid wearing loose
clothing that may get caught in the equipment or that may restrict or prevent
movement.

The equipment has Maximum user weight of: 220lb.

The equipment is not suitable for therapeutic use. There are many functions
of the computer, in which the value will show up when using the equipment.

Please note that the value of the heart pulse displayed on the monitor is
an estimate for reference.
To prevent injury to your back or other parts of body，care must be taken

when lifting or moving the equipment. Always use proper lifting techniques

and/or seek assistance if necessary.

Braking ability is independent of speed/tension.

This equipment is designed for indoor and home use only , it is not intended

for commercial use.

conditions you should consult your physician

The equipment is designed for adult use

Upper sensor wire

Lower Sensor wire

U shape slider

Fix onto

Fix

onto

tighten

tighten

A. Connect the Lower Sensor wire (48) with the Upper sensor wire (46), then push the

connected sensor wire back into the tube of Main frame(1).

B. Fix the Front post (42) onto the Main frame (1) with Arc washers (41), Washers (7)

and Screws (40).

Computer mount

USAGE AND MAINTENANCE

1. If there is no signal coming the computer please check if the sensor wires
(46 & 48) are connected correctly.

2. If the display becomes blurry, please replace the batteries to improve the result.

3. This bike can be leveled toto compensate for uneven surfaces. To level the bike,
ple

ase raise or lower the foot pads, which are located on the bottom of the front
and rear stabilizers. To raise the foot pad, screw it counterclockwise; to lower
the foot pad, screw it clockwise (See picture below). Once the mainframe is
leveled, turn the nut (4) upward and secure it tightly against the front and rear
stabilizers.

#4

4. B

efore every workout, please check the pedal axle. If the pedals have become

loose, please retighten them.

5

.

Always make sure all hardware parts such as bolts，nuts and washers are
positioned correctly and tightly secured.

6.

Always inspect the safety chain guard that protects the moving parts of the
bike to be in safe and good order.

7.

Always inspect the seat post, seat slider, pedals and handlebar to make sure
they are in safe and stable position before using the bike.

8.

It is recommended that you lubricate all moving parts on a monthly basis.
Do not dismount the bike until the pedals are at a complete STOP.

9.

EXERCISE COMPUTER

SPECIFICATIONS:

TIME --------------------------------------------------00:00 - 99:59 MIN:SEC

SPEED -------------------------------------------------0.0 – 999.9 KM/H OR ML/H

DISTANCE ----------------------------------------------0.00 – 99.99 KM OR ML

CALORIES ----------------------------------------------0.0 – 999.9 KCAL

KEY FUNCTION:

MODE: To select the func

on you want. Hold the key for 4 seconds to have all

values reset to zero .

OPERATION PROCEDURES:

AUTO ON/OFF .The monitor will be automa

cally shut off if there is no signal coming in for

4 minutes. The monitor will be auto-powered when starts exercise or press the key.

FUNCTION:

<1>.TIME Accumulates the workout

<2>.SPEED Disp

lay the current speed.

while exercising.

<3>.DISTANCE Accumulates the distances while exercising.

<4>.CALORIES Accumulates amount of calories consumed while exercising.

<5>.SCAN Automa

cally scan through each func on between ① TIME② SPEED

③ DISTANCE④ CALORIE

BATTERY:

If the display on the monitor appears improper or becomes difficult to see ，

12