Page 1
Instruction Manual
For AT-3002 Heater
Please read it carefully before use and save these important
safeguards
Page 2
Introduction:
The electric heater can quickly and quietly warm up any room.
This model is with 1000-1200 watts and 2 heat settings. Ensuring exceptional and
highly flexible performance for the room.
Features:
1. Electronics control, Remote control function.
2. working comfortable and quietly
3. Safe for family use.
4. Unique appearance, novel style.
5. 2 heat settings.
6. With thermal fuse to avoid over-heating.
Views of the appliance and part name:
Care & Cleaning:
1.Always pull out the plug before cleaning or repairing the appliance.
2.Do not knock against or use sharp objects near the appliance so as to
avoid damaging the coating or rusting it.
3.Never immerse the appliance in water.
1.Body
2. LCD Display
3. Plot Crotral
4. Remote Control Panel
5. Power Switch
6. Power Line
Important Safety Instructions:
1. It is absolutely wrong to overturn the appliance to use.
2. The appliance can only be used indoor. It cannot be used in the places full of vapor,
ash or in inflammable, explosive air.
3. When using the appliance. Do not put any obstructions within 0.5 meter above it and
it must be far from furniture, the things that are easy to be out of shape or change
color after being heated. Do not hang any unstable object over the heater.
4. Do not use the appliance on the same socket or electric circuit with other electrical
appliances so as to prevent the circuit from being overloaded, which will cause fire.
Please do not prolong the power cords by yourself or use movable socket.
5. Do not let children insert hands, sticks and so on into the holes, and slots of the
appliance so as to avoid accidents.
See figure 4 for the default heating mode from Monday to Sunday. The program will be
followed if without any modification. The upper limited temperature for fully power is
25 . The lower limited temperature for half power is 20 .
Technical Information:
This electric heater can warms up any room quickly and quietly. It has 650-750
watts and 2 heat settings ensuring exceptional and highly flexible performance for
the room.
Model
Power Regulation Range
Voltage
AT-3002
650-750 W
220V AC/50Hz
Correct disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
Page 3
6. Do not put clothes, towels and other things on the appliance directly to be dried or
drop water into the appliance.
7. When cleaning the appliance, please turn it off and pull out the plug.
8. When the appliance is working, please do not put the power cord on the top of the
heated appliance, never let power cord knotted.
9. Avoid pressing the power cords with heavy things.
10.If the appliance is broken down, never attempt to use it and do not disassemble or
repair it by yourself, it should be sent to a appointed repair stations in time to be
repaired by specialized personnel.
11. When the appliance is working, do not often open the doors or windows, otherwise.
It will affect the warming effect.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
13. If the appliance is covered, there is a fire risk.
14. Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool or use outdoor..
15. Connect the appliance only to properly wired outlet.
16. Handle power cord carefully, do not bend or pull the power cord and always unplug
from outlet when not in use.
17. Closed supervision is necessary when any appliance used by or near children. Never
leave appliance unattended.
18. The use of accessory attachment not recommended by the appliance manufacture
may cause hazard.
19. Do not use appliance for other than intended use.
20. Maintenance other than cleaning should be performed at an authorized serviced
facility.
21. If your AC wall outlet becomes loose, it may overheat. Should this happen, consult
a qualified electrician.
22. Smoke or smell will be emitted while in use for the first time. Continue heating the
appliance until the smoke stop emitting.
23. WARNING In order to avoid overheating, do not cover the heater.
24. The heater must not be located immediately below a socket-outlet
25. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Mouting:
1.Initialize a space for installing the heater according to figure1.
2.Drill holes into the wall, and put the plastic expanse into the hole and attach the
pothook with screws.
5
Automatically. Press key, on the contrary, the temperature will be decreased. The
minimum temperature is 5 .
6. PROG mode setting: There are 3 steps for heating mode setting. First step is setting
the date. Second step is setting the time. Third step is setting from Monday to Sunday.
(1). Date setting: When the heater is plug on but not in working status, press PROG
key with short time then enter into the date setting status. The default date in
program is Monday(MON),the icon for Monday is blinking. Press + with short
time, the date will be displayed from Monday-Tuesday- -Sunday-Monday.
When you press + with long time, the date will be changed automatically.
Press , vice versa. When the date is chose and confirmed. The icon for the date
is shining all the time.
Note: There are two ways to settle the date. First, the date setting is confirmed if
without any other signal input within 5 seconds. Second, when the heater is plug on
but not in working status, press PROG two times then enter into the setting status.
The present date will be confirmed by program.
(2). Time setting: When the heater is plug on but not in working status, press
PROG key two times or press one time after date setting then enter into the
time setting status. The default time in program is 12:00, press + with short
time, the hour will be displayed from 12-13- -24-01- -12-13. When you press
+ with long time, the hour will be changed automatically. Press , the minute
will be 01,then cycled displayed from 00-01- -59-00-01. When you press
with long time, the minute will be changed automatically. When the time is chose
and confirmed. The icon for the time is shining all the time.
Note:There are two ways to set the time. First, the time setting is confirmed if without
any other signal input within 5 seconds. Second, when the heater is plug on but not in
working status, press PROG three times then enter into the setting status. The
present time will be confirmed by program.
(3). Monday to Sunday setting: When the heater is plug on but not in working
status, press PROG key three times or press one time after time setting then enter
into the time setting status. The icon for Monday is shining all the time. The icon for
is blinking. The default setting in program is Monday(MON), see figure 4 for
working period. Press + key, the heater is working under fully power, press - key,
the heater is working under half power. Press - key again, then it becomes zero
power output. The heating mode can be settled from 00 to 24 hours by press PROG
key. After Monday setting, press PROG key with short time, it will be entered into
the setting status for Tuesday. Setting method as above.
Note:
The week setting is confirmed if without any other signal input within 5 seconds.
The setting status will come back to the date setting status if you press PROG
again after the week setting finished.
The whole heating mode program is valid only if the time, date and week setting are
confirmed.
"-"
""
""
""
"-"
""
""
""
" " "-"
"-"
""
""
" "
" " " "
""
""
""
""
The icon of the setting temperature is lighting.
Page 4
3.Attach the plastic space using screws supplied.
4.Plug the product into the pothook.(See figure 2)
5.Switch on the wall socket so that the heater can be turned on
6.Use bolts to fix bracket with heater body on the wall.
Figure 1
Figure 2
1. Back Body
2. Plastic space
3. Pothook
4. Screw
5. Plastic expanse
6.bracket
LCD Display and Remote control Panel:
1. LCD display diagram and remote control panel diagram
2. Time & temperature display diagram
3. PROG mode setting diagram
Operation instruction
1. Switch on: The program will run the self checking status after power plug ON. The
self checking will be finished when all the character display are extinguished. Press
the "POWER" key, the heater is under waiting for working status. The icon of the
environment temperature is lighting.
2. Nature heating mode: When the heater is plug on but not in working status, press
"MODE" key , the icon for nature heating mode is blinking. The heater will run the
nature heating mode if without any other "MODE" signal input after 5 seconds. The
nature heating mode is fully power output until the environment temperature is
surpassed 25 . The default environment temperature is 25 .
3. Energy saving heating mode: When the heater is plug on but not in working status,
press "MODE" key with two times continually, the icon for energy saving heating
mode is blinking. The heater will
""
""
""
""
""
""
""
run the energy saving heating mode if without any
other MODE signal input after 5 seconds. The economic heating mode is half power
output until the environment temperature is surpassed 20 temperature. The default
environment protect temperature is 20 .
4.Antifreezing mode: When the heater is plug on but not in working status, press
MODE key with three times continually, the icon for antifreezing mode is blinking.
The heater will run the antifreezing mode if without any other MODE signal input
after 5 seconds. The antifreezing mode is half power output until the environment
temperature is surpassed 15 . The default environment protect temperature is 15 .
Note: The icon for normal heating mode will blink and come to normal heating mode if
you press MODE key under antifreezing mode.(Operation cycled)
5. Temperature setting: Under three modes mentioned above, the icon for temperature
will be blinking and can be settled when press TEMP key with short time. Press key
+ with short time, the ambient temperature can be increased 1 , the maximum
temperature is 38 .When press + with long time, the temperature will be increased
Loading...