Sun Microsystems Netra T1 AC200, Netra T1 DC200 User Manual

DIMM Installation Guide

Netra T1 AC200 and DC200 Servers

use, copying, distribution, and decompilation. No part of thisproductordocumentmaybe reproducedinanyformbyanymeanswithoutpriorwrittenauthorizationofSunanditslicensors,if any. Third-partysoftware,includingfonttechnology,iscopyrightedandlicensedfromSun suppliers.

Parts of the productmaybederivedfromBerkeleyBSDsystems,licensedfromtheUniversityof California. UNIX is a registeredtrademarkintheU.S.andothercountries,exclusivelylicensed throughX/OpenCompany,Ltd.

Sun, Sun Microsystems,theSunlogo,SunDocs,Netra,andSolarisaretrademarks,registered trademarks, or service marks of Sun Microsystems,Inc.intheU.S.andothercountries.AllSPARC trademarks areusedunderlicenseandaretrademarksorregisteredtrademarksofSPARC International, Inc. in the U.S. and other countries. ProductsbearingSPARCtrademarksarebased upon an architecturedevelopedbySunMicrosystems,Inc.

The OPEN LOOKandSun™GraphicalUserInterfacewasdevelopedbySunMicrosystems,Inc.for its users and licensees. Sun acknowledges the pioneering effortsofXeroxinresearchingand developing the concept of visual or graphical user interfaces forthecomputerindustry.Sunholdsa non-exclusive license fromXeroxtotheXeroxGraphicalUserInterface,whichlicensealsocovers Sun’slicenseeswhoimplementOPENLOOKGUIsandotherwisecomplywithSun’swrittenlicense agreements.

RESTRICTEDRIGHTS: Use, duplication, or disclosurebytheU.S.Governmentissubjectto restrictionsofFAR52.227-14(g)(2)(6/87) and FAR 52.227-19(6/87), or DFAR252.227-7015(b)(6/95) and DFAR227.7202-3(a). DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

InstallingDIMMs

Note – Use only dual inline memory modules (DIMMs) that

are specifically designed for the Netra™ T1 AC200 and DC200 servers. There are two DIMMs available: a 256 Mbyte DIMM (sales part number X7083A) and a 512 Mbyte DIMM (sales part number X7084). For the maximum 2 Gbytes of memory, install four 512-Mbyte DIMMs.

1. Power off your system and open the system unit.

Remove the top cover by following the procedure described in the Netra T1 AC200 and DC200 Server User’s Guide (part number 8065978-10). Make sure you disconnect all power cables and wear an antistatic wrist strap.

2. Locate the wrist strap, and attach its adhesive copper strip to the metal casing of the power supply. Wrap the other end twice around your wrist with the adhesive side against your skin.

3. Locate the DIMM slots on the motherboard (see Figure 1-2).

4. Unpack the DIMM, holding it only by the edges.

Figure 1-1 Unpacking the DIMMs

DIMM slots

CPU fan

Figure 1-2 Inserting a DIMM into Slot 0

5. Insert the DIMM into the first vacant socket.

For illustrations of the correct insertion procedure, refer to the diagrams labeled “Memory insertion” inside the top cover of the system. If your system contains no DIMMs, use Slot 0 first (see next Note box).

Note – There are four DIMM slots. The one nearest to the

CPU fan is slot 0. The one nearest to the power supply unit is slot 3. Put the first DIMM in slot 0, and install subsequent DIMMs in contiguous slots.

The DIMMs are designed with two slots cut into the connector. These ensure that you can only insert the DIMMs the correct way round.

Caution – If you do not seat the DIMM into its slot evenly,

it can cause shorts that will damage the system. Ensure that all contacts engage at the same time. You will hear a “click” when the DIMM is properly seated.

6. Detach the wrist strap and close the system unit.

Replace the top cover by following the procedure described in the Netra T1 AC200 and DC200 Server User’s Guide (part number 8065978-10).

restreignentl’utilisation,lacopie,ladistribution, et la décompilation. Aucune partie de ceproduitou document ne peut êtrereproduitesousaucuneforme,parquelquemoyenquecesoit,sans l’autorisation préalable et écrite de Sun et de ses bailleurs delicence,s’ilyena.Lelogicieldétenupar des tiers, et qui comprendlatechnologierelativeauxpolicesdecaractères,estprotégéparun copyright et licencié par des fournisseurs de Sun.

Des parties de ce produitpourrontêtredérivéesdessystèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marquedéposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.

Sun, Sun Microsystems,lelogoSun, SunDocs, Netra, et Solaris sont des marques de fabrique ou des marquesdéposées,oumarquesdeservice,deSun Microsystems, Inc. aux Etats-Unis et dans d’autres pays. Touteslesmarques SPARCsontutiliséessouslicenceetsontdesmarquesdefabriqueoudes marques déposées de SPARCInternational,Inc.auxEtats-Uniset dans d’autres pays. Les produits portant les marquesSPARC sont basés sur une architecturedéveloppéeparSunMicrosystems,Inc.

L’interfaced’utilisationgraphiqueOPENLOOKet Sun™ a été développée par Sun Microsystems, Inc. pour ses utilisateurs et licenciés. Sun reconnaîtleseffortsdepionniersdeXeroxpourla rechercheetledéveloppementduconceptdesinterfacesd’utilisationvisuelleougraphiquepour l’industrie de l’informatique. Sun détient une licence non exclusive de Xeroxsurl’interface d’utilisation graphique Xerox,cettelicencecouvrantégalement les licenciés de Sun qui mettent en place l’interface d’utilisation graphique OPEN LOOK et qui en outreseconformentauxlicences écrites de Sun.

CETTE PUBLICATIONESTFOURNIE"ENL’ETAT"ETAUCUNEGARANTIE,EXPRESSEOU IMPLICITE, N’EST ACCORDEE, Y COMPRIS DES GARANTIES CONCERNANT LA VALEUR MARCHANDE, L’APTITUDEDELAPUBLICATIONAREPONDREAUNEUTILISATION PARTICULIERE,OULEFAITQU’ELLE NE SOIT PAS CONTREFAISANTEDEPRODUITDE TIERS. CE DENI DE GARANTIE NE S’APPLIQUERAITPAS, DANS LA MESURE OU IL SERAIT TENU JURIDIQUEMENT NUL ET NON AVENU.

A Sun Microsystems, Inc. Business 901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 fax 650 969-9131

Part Number: 806-6991-10 Revision A of October 2000