Sunlighten lumiNIR Quick Start Manual

Follow these simple steps for maximum results:

• Read Quick Start Guide.

• Take note of the treatment area before you begin to measure results.

• Take a “before” picture if applicable.

• Refer to www.sunlighten.com/lumiNIR for FAQs and treatment protocols.

lumiNIR

Congratulations on your lumiNIR purchase!

Get to Know Your Device:

LED attachment

LED detach lever

Power button

Intensity button

Treatment Steps:

• Cleanse and dry skin

• Turn on device and select intensity level (see chart on back)

• Place light directly on clean, dry skin

• Device will beep when treatment time ends

• Move on to your next treatment area

QUICK START GUIDE

lumiNIR Intensity Options

The lumiNIR offers four intensity levels. Level 1 is considered one dose.

This is the minimum amount needed for a treatment. You can increase the dosage based on your need.

Intensity Level

Light Indicator

(the light on the on device will change color for each level)

Treatment Time

Level 1 (default) Green light 35 seconds

Level 2 Blue light 1:10 minutes

Level 3 Green/Red light 1:45 minutes

Level 4 Red light 2:20 minutes

Cleaning:

Use a damp, soft, lint-free cloth and water or rubbing alcohol to clean the LED attachments. Makeup wipes are also a good option.

Do not immerse in water at any time. The back of the LED heads must remain dry.

For specic treatment protocols, visit www.sunlighten.com/luminir/#protocols.

www.sunlighten.com | 877-292-0020