www.SunLED.com
PRELIMINARY SPEC
Features
●4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm
THICKNESS.
●LOW POWER CONSUMPTION.
●WIDE VIEWING ANGLE.
●IDEAL FOR BACKLIGHT AND INDICATOR
●VARIOUS COLORS AND LENS TYPES AVAILABLE.
●PACKAGE: 2000PCS/REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
●RoHS COMPLIANT.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
A=25°C)
(T
Reverse Voltage V
Forward Current I
R 5 V
F 30 mA
Forward Current (peak)
1/10 Duty Cycle
FS 100 mA
i
0.1ms Pulse Width
Power Dissipation P
Operating Temperature T
T 111 mW
A -40 ~ +85
Storage Temperature Tstg -40 ~ +85
Electrostatic Discharge Threshold
(HBM)
M2BB
(InGaN)
1000 V
Unit
°C
Part Number:
ZM2BB90W
4.1 x 1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
Operating Characteristics
(T
A=25°C)
Forward Voltage (Typ.)
(I
F=20mA)
Forward Voltage (Max.)
F=20mA)
(I
Reverse Current (Max.)
R=5V)
(V
F 3.2 V
V
F 3.7 V
V
R 10 uA
I
Wavelength Of Peak
Emission (Typ.)
(I
F=20mA)
λ P
Wavelength Of Dominant
Emission (Typ.)
(I
F=20mA)
λ D
Spectral Line Full Width
At Half-Maximum (Typ.)
(I
F=20mA)
Capacitance (Typ.)
F=0V, f=1MHz)
(V
Δλ
C 110 pF
M2BB
(InGaN)
458 nm
465 nm
22 nm
Unit
Part
Number
Emitting
Color
Emitting
Material
Lens-color
Luminous
Intensity
(IF=20mA)
mcd
min. typ.
Wavelength
nm
λ P
ZM2BB90W Blue InGaN Water Clear 110 248 458
Published Date : FEB 26,2008 Drawing No :SDSA6416 M V1 Checked : B.L.LIU P. 1/4
Viewing
Angle
2 θ 1/2
110
°
www.SunLED.com
M2BB
Part Number:
4.1 x 1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
ZM2BB90W
Published Date : FEB 26,2008 Drawing No :SDSA6416 M V1 Checked : B.L.LIU P. 2/4
www.SunLED.com
Part Number:
4.1 x 1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
ZM2BB90W
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specification (Units : mm)
The device has a single mounting surface. The device
must be mounted according to the specifications
.
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 26,2008 Drawing No :SDSA6416 M V1 Checked : B.L.LIU P. 3/4
www.SunLED.com
PACKING & LABEL SPECIFICATIONS ZM2BB90W
Part Number:
4.1 x 1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
ZM2BB90W
Published Date : FEB 26,2008 Drawing No :SDSA6416 M V1 Checked : B.L.LIU P. 4/4
Loading...