OPERATOR’S MANUAL
A Division of Snow Joe®, LLC
R
CORDLESS SPIN POWER SCRUBBER
Model 24V-PWSCRB-LTW Form No. SJ-24V-PWSCRB-LTW-880E-M
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in death or serious injury.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in death or serious injury.
General Safety
mWARNING! This appliance is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory, or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that
they do not play with the appliance.
Before starting up your power scrubber, please check it
carefully for any defects. If you nd any, do not start up your
power scrubber. Contact your authorized Snow Joe
Sun Joe
service center at 1-866-SNOWJOE (1-866-766-9563).
®
dealer or call the Snow Joe® + Sun Joe® customer
®
+
mWARNING! When using the power scrubber, basic
safety precautions should always be followed to reduce the
risk of re, electric shock, and personal injury. These include:
• Know your product – Know how to stop the power
scrubber quickly. Thoroughly familiarize yourself with the
controls.
• Keep bystanders away – All visitors and pets should be
kept a safe distance away from the work area.
• Use the right product – Do not use this power scrubber for
any job except that for which it is intended.
• Dressproperly– Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
•
mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
© 2019 by Snow Joe®, LLC
All rights reserved. Original instructions.
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the power scrubber when you are
tired, or under the inuence of alcohol or drugs.
• Do not overreach –
all times.
• Prevent unintentional starting – Make sure the switch is
o before inserting the battery, picking up, or carrying the
power scrubber. Do not carry the power scrubber with your
nger on the switch.
• Usesafetyglasses– Also use safety footwear, snug-tting
clothing, protective gloves, and hearing and head protection.
• Store idle tool indoors – When not in use, power scrubber
should be stored indoors in a dry and safe place out of the
reach of children. Do not expose to freezing temperatures.
Keep proper footing and balance at
mWARNING! Do not use this appliance without reading
this instruction manual.
mWARNING! Do not use the appliance within range of
other people unless they are wearing protective clothing.
mWARNING! Do not block any openings. Keep free of
lint, hair, dust, and anything that may aect air ow.
• Do not handle the scrubber's plug with wet or damp hands.
• Do not use scrubber on surfaces that could risk releasing
hazardous dust or liquids.
• Risk of explosion – Do not spray ammable liquids.
• Remove the battery – Remove the battery from the
compartment before performing any maintenance task.
• Keep children away – To reduce the risk of injury,
close supervision is necessary when the power scrubber is
used near children. This power scrubber must not be used
by children or untrained personnel.
• Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of improper
accessories may cause risk of injury.
• Follow the maintenance instructions specied in the
manual.
mWARNING! During cleaning, maintenance, or when
replacing parts, disconnect the power scrubber from its power
source by removing the battery from the compartment.
mWARNING! Do not pressure-wash the power scrubber,
which may cause a short circuit, personal injury, or damage to
components.
• Check for damaged parts – Do not use the appliance if
any important parts of the appliance are damaged.
SAVE THESE INSTRUCTIONS
1
• Do not allow the battery nor motor to come in contact with
water.
• In the event of an accident or breakdown, switch o the
power scrubber immediately.
SpecicSafetyWarningsfor
Cordless Power Scrubber
• Always use rubber gloves and proper eye wear to avoid
contact from splashing, soaps, or detergents on skin and/
or eyes while brush head is spinning and when brushes are
removed or attached.
• When done using power scrubber, turn the unit o while
brush is still in contact with surface to avoid getting
splashed.
• Always test on a small, inconspicuous area before using on
a larger area. Always follow manufacturer's guidelines for
cleaning and maintenence.
• Do not use with abrasive cleaners on any surface.
• Avoid exposing the power scrubber to excessive water.
If power scrubber accidentally becomes submerged in
water or water gets into battery charging compartment,
shake out liquid and allow power scrubber to dry overnight.
• Choose proper brush attachment and attach to power
scrubber as directed in assembly instructions.
• Wet the intended area and apply desired cleaning product.
• Place tip of brush on surface to be cleaned.
Electrical Safety
1. If the battery charger cord is damaged, please call the
Snow Joe
1-866-SNOWJOE (1-866-766-9563).
2. If charging the power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected power supply. The using of an RCD reduces the
risk of electric shock.
3. Do not abuse the charging cord. Never use the cord for
carrying, pulling or unplugging the charger.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
4. Battery charger is for indoor use only. Do not charge the
power scrubber in rain, or in wet locations.
®
+ Sun Joe® customer service center at
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
IMPORTANT! Analyses conrm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
mWARNING! Use only approved replacement batteries;
other batteries may damage the power tool and cause it to
malfunction, which can lead to serious personal injury.
mWARNING! Do not use a battery pack or appliance that
is damaged or modied. Damaged or modied batteries may
exhibit unpredictable behavior resulting in re, explosion or risk
of injury.
Do not modify or attempt to repair the appliance or the battery
pack except as indicated in the instructions for use and care.
Have your battery pack serviced by a qualied repair person
using only identical replacement parts. This will ensure that the
safety of the battery pack is maintained.
mCAUTION! To reduce the risk of injury, charge the
24V iON+ lithium-ion battery pack only in its designated
24V iON+ lithium-ion charger. Other types of chargers present
risk of re, personal injury and damage. Do not wire a battery
pack to a power supply plug or car cigarette lighter. Such
misuse will permanently disable or damage the battery pack.
• Avoid dangerous environments – Do not charge the
battery pack in rain, snow or in damp or wet locations.
Do not use the battery pack or charger in the presence of
explosive atmospheres (gaseous fumes, dust or ammable
materials) because sparks may be generated when inserting
or removing the battery pack, which could lead to a re.
• Charge in a well-ventilated area – Do not block the
charger vents. Keep them clear to allow for proper
ventilation. Do not allow smoking or open ames near a
charging battery pack. Vented gases may explode.
NOTE: The safe temperature range for the battery is
41°F (5°C) to 105°F (40.5°C). Do not charge the battery
outside in freezing weather; charge it at room temperature
59ºF - 77ºF (15ºC - 25ºC).
2
• Maintain charger cord – When unplugging the charger,
pull the plug, not the cord, from the receptacle to reduce
the risk of damage to the electrical plug and cord.
Never carry the charger by its cord or yank it by the cord
to disconnect it from the receptacle. Keep the cord away
from heat, oil and sharp edges. Make sure the cord will not
be stepped on, tripped over or subjected to damage or
stress when the charger is in use. Do not use the charger
with a damaged cord or plug. Replace a damaged charger
immediately.
• Do not use an extension cord unless it is absolutely
necessary – Using the wrong, damaged or improperly
wired extension cord poses a risk of re and electric shock.
If an extension cord must be used, plug the charger into a
properly wired 16 gauge or larger extension cord with the
female plug matching the male plug on the charger. Make
sure that the extension cord is in good electrical condition.
• Use only recommended attachments – Use of an
attachment not recommended or sold by the battery
charger or battery pack manufacturer may result in risk of
re, electric shock or personal injury.
• Unplug charger when not in use – Make sure to remove
battery packs from unplugged chargers.
mWARNING! To reduce the risk of electric shock,
always unplug the charger before performing any cleaning
or maintenance. Do not allow water to ow into the charger.
Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock
hazards.
• Do not burn or incinerate battery packs – Battery packs
may explode, causing personal injury or damage.
Toxic fumes and materials are created when battery packs
are burned.
• Do not crush, drop or damage battery packs – Do not
use the battery pack or charger if they have sustained a
sharp blow, been dropped, run over or have been damaged
in any way (i.e. pierced with a nail, hit with a hammer,
stepped on, etc.).
• Do not disassemble – Incorrect reassembly may pose
a serious risk of electric shock, re or exposure to toxic
battery chemicals. If the battery or charger are damaged,
contact an authorized Snow Joe
call the Snow Joe
1-866-SNOWJOE (1-866-766-9563) for assistance.
• Battery chemicals cause serious burns – Never let a
damaged battery pack contact the skin, eyes or mouth.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. Liquid ejected from the battery may
cause irritation or burns. If a damaged battery pack leaks
battery chemicals, use rubber or neoprene gloves to safely
dispose of it. If skin is exposed to battery uids, wash the
aected area with soap and water and rinse with vinegar.
If eyes are exposed to battery chemicals, immediately
ush with water for 20 minutes and seek medical attention.
Remove and dispose of contaminated clothing.
• Do not short circuit – A battery pack will short circuit if
a metal object makes a connection between the positive
and negative contacts on the battery pack. Do not place a
®
+ Sun Joe® customer service center at
®
+ Sun Joe® dealer or
battery pack near anything that may cause a short circuit,
such as paperclips, coins, keys, screws, nails and other
metallic objects. A short-circuited battery pack poses a risk
of re and severe personal injury.
• Store your battery pack and charger in a cool,
dry place – Do not store the battery pack or charger where
temperatures may exceed 105ºF (40.5ºC), such as in direct
sunlight or inside a vehicle or metal building during the
summer.
Information About the Battery
1. The battery pack supplied with your cordless power tool is
only partially charged. The battery pack has to be charged
completely before you use the tool for the rst time.
2. For optimum battery performance, avoid low discharge
cycles by charging the battery pack frequently.
3. Store the battery pack in a cool place, ideally at
59°F (15°C) and charged to at least 40%.
4. Lithium-ion batteries are subject to a natural aging
process. The battery pack must be replaced at the latest
when its capacity falls to just 80% of its capacity when
new. Weakened cells in an aged battery pack are no
longer capable of meeting the high power requirements
needed for the proper operation of your cordless power
scrubber, and therefore pose a safety risk.
5. Do not throw battery packs into an open re as this poses
a risk of explosion.
6. Do not ignite the battery pack or expose it to re.
7. Do not exhaustively discharge batteries. Exhaustive
discharge will damage the battery cells. The most
common cause of exhaustive discharge is lengthy storage
or non-use of partially discharged batteries. Stop working
as soon as the performance of the battery falls noticeably
or the electronic protection system triggers. Place
the battery pack in storage only after it has been fully
charged.
8. Protect batteries and the tool from overloads.
Overloads will quickly result in overheating and cell
damage inside the battery housing even if this overheating
is not apparent externally.
9. Avoid damage and shocks. Immediately replace batteries
that have been dropped from a height of more than
3 feet (1 meter) or those that have been exposed to violent
shocks, even if the housing of the battery pack appears to
be undamaged. The battery cells inside the battery may
have suered serious damage. In such instances, please
read the waste disposal information for proper battery
disposal.
10. If the battery pack suers overloading and overheating,
the integrated protective cuto will switch o the
equipment for safety reasons.
IMPORTANT! Do not press the ON/OFF switch any more
if the protective cut-o has been activated. This may
damage the battery pack.
11. Use only original battery packs. The use of other batteries
poses a re risk and may result in injuries or an explosion.
3
12. Do not expose a battery pack or appliance to re or
excessive temperature. Exposure to re or temperature
above 266°F (130°C) may cause explosion.
13. Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specied in the instructions. Charging improperly
or at temperatures outside of the specied range may
damage the battery and increase the risk of re.
Information About the Charger and the
Charging Process
1. Please check the data marked on the rating plate of the
battery charger. Be sure to connect the battery charger
to a power supply with the voltage marked on the rating
plate. Never connect it to a dierent mains voltage.
2. Protect the battery charger and its cord from damage.
Keep the charger and its cord away from heat, oil and
sharp edges. Have damaged cords repaired without delay
by a qualied technician at an authorized Snow Joe
Sun Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
3. Electrical plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
grounded appliances. Unmodied plugs and matching
outlets will reduce the risk of electric shock.
4. Keep the battery charger, battery pack(s) and the cordless
tool out of the reach of children.
5. Do not use the supplied battery charger to charge other
cordless tools.
6. During periods of heavy use, the battery pack will become
warm. Allow the battery pack to cool to room temperature
before inserting it into the charger to recharge.
7. Do not overcharge batteries. Do not exceed the maximum
charging times. These charging times only apply to
discharged batteries. Frequent insertion of a charged or
partially charged battery pack will result in overcharging
and cell damage. Do not leave batteries in the charger for
days on end.
8. Never use or charge batteries if you suspect that it has
been more than 12 months since the last time they were
charged. There is a high probability that the battery pack
has already suered dangerous damage (exhaustive
discharge).
9. Charging batteries at a temperature below 41°F (5°C) will
cause chemical damage to the cells and may cause a re.
10. Do not use batteries that have been exposed to heat
during the charging process, as the battery cells may have
suered dangerous damage.
11. Do not use batteries that have suered curvature or
deformation during the charging process or those that
exhibit other atypical symptoms (gassing, hissing,
cracking, etc.).
®
dealer or call the Snow Joe® + Sun Joe®
®
+
12. Never fully discharge the battery pack (maximum
recommended depth of discharge is 80%). A complete
discharge of the battery pack will lead to premature aging
of the battery cells.
ProtectionFromEnvironmentalInuences
1. Wear suitable work clothes. Wear safety goggles.
2. Protect your cordless tool and the battery charger from
moisture and rain. Moisture and rain can cause dangerous
cell damage.
3. Do not use the cordless tool or the battery charger near
vapors and ammable liquids.
4. Use the battery charger and cordless tools only in dry
conditions and at an ambient temperature of 50°F – 122°F
(10°C – 50°C).
5. Do not keep the battery charger in places where the
temperature is liable to reach over 104°F (40°C).
In particular, do not leave the battery charger in a car that
is parked in the sunshine.
6. Protect batteries from overheating. Overloads,
overcharging and exposure to direct sunlight will result
in overheating and cell damage. Never charge or work
with batteries that have been overheated – replace them
immediately, if possible.
7. Store the charger and your cordless tool only in dry
locations with an ambient temperature of 40°F - 104°F
(4.5°C - 40°C). Store your lithium-ion battery pack in a
cool, dry place at a temperature of 50°F - 68°F (10°C 20°C). Protect the battery pack, charger and cordless tool
from humidity and direct sunlight. Only place fully charged
batteries in storage (charged to at least 40%).
8. Prevent the lithium-ion battery pack from freezing.
Battery packs that were stored below 32°F (0°C) for more
than
60 minutes must be discarded.
9. When handling batteries, be wary of electrostatic charge.
Electrostatic discharges can damage the electronic
protection system and the battery cells. Avoid electrostatic
charging and never touch the battery poles.
Product Description
Purpose
• This cordless power scrubber is intended for residential
use only. The scrubber can be used just with the head and
handle as it arrives, or with the provided pole attachment
for extra length. The scrubber comes with four dierent
brush attachments designed for heavy to light duty cleaning
jobs in areas like bathroom, kitchen, home interior, vehicles,
and more. Its adjustable, waterproof head can tilt up to 45º
for easy access to dicult areas.
4
Safety Symbols
The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all
instructions on the power scrubber before attempting to assemble and operate.
Symbols SymbolsDescriptions Descriptions
READ THE OPERATOR'S
MANUAL(S) – Read, understand,
and follow all instructions in the
user manual(s) before attempting
to assemble and operate.
WARNING! Do not expose the unit
to rain or wet conditions. Keep dry.
SAFETY ALERT – Indicates a
precaution, a warning, or a danger.
WEAR EYE AND HEARING
PROTECTION – For protection
against injury, wear ear defenders
and safety goggles.
Spinning brush. Keep hands away.
Store indoors. Never store the
power scrubber outdoors.
If the pump freezes, permanent
damage may result.
Indoor use only. Only use battery charger indoors.
Wear safety gloves during
use to protect hands.
Wear non-slip footwear that will
protect your feet and improve your
footing on slippery surfaces.
5
Know Your Cordless Power Scrubber
Read the owner’s manual and safety rules carefully before operating the power scrubber. Compare the illustration below to the
power scrubber in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for
future reference.
1
1. Scrubber head
2. Head adjustment button
3. Pole locking collar
4. Pole attachment
5. Handle locking collar
6. On/O switch (2 speed settings)
7. Scrubber handle
8. Charge socket
9. Push button for battery indicator
10. Battery indicators
2
19
3
18
17
4
16
11. Push lock button
12. 24V iON+ lithium-ion battery (24VBAT-LTW)
featuring exclusive EcoSharp
13. Battery compartment
14. 24V iON+ lithium-ion charger (XZ2600-0450)
15. Charger plug
16. Round brush
17. Large at brush
18. Cone brush
19. Small at brush
6
5
14
13
15
®
technology
7
8
9
10
12
11
Technical Data
Battery Voltage* ....................................... 24 V D.C.
Battery Capacity ...................................... 1.3 Ah
Charging Time Max ................................. 3 hours
Charger Input........................................... 100 – 240 V AC,
50 – 60 Hz, 0.4 A
Charger Output ........................................ 26 V D.C.
Battery Run Time Max ............................ 50 min
Max length ............................................... 27 in. (69 cm)
(head + handle + attachments)
Max length (with pole attachment) .......... 50 in. (128 cm)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under typical load is 21.6 volts.
450 mA
Variable Speed Settings ....................................2
Brush Speeds ....................................................Low 600 rpm
Head Tilt Adjustment .........................................45º
Small Flat Brush Diameter .................................2.4 in. (6 cm)
Cone Brush Diameter ........................................2.4 in. (6 cm)
Large Flat Brush Diameter .................................3.7 in. (9.5 cm)
Round Brush Diameter ......................................5 in. (12.5 cm)
Weight (power scrubber alone) .........................2.7 lbs (1.2 kg)
Weight (with battery installed) ...........................3.5 lbs (1.6 kg)
6
High 1000 rpm
Unpacking
Carton Contents
• Cordless power scrubber head (pre-assembled)
• Scrubber handle (pre-assembled)
• Pole attachment
• Large at brush (pre-assembled)
• Small at brush
• Cone brush
• Round brush
• 24V iON+ lithium-ion battery
• 24V iON+ lithium-ion charger
• Manuals with registration card
1. Carefully remove the power scrubber and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
power scrubber. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
®
+ Sun Joe® customer service center at
mWARNING! Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
Light IndicatorsLights
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, insert the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
mWARNING! Charge only 24V iON+ lithium-ion battery
packs with its compatible 24V iON+ lithium-ion charger.
Other types of batteries may cause personal injury and
damage. To reduce the risk of electric shock, do not allow
water to ow into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT-LTW
Lithium-iON Battery
NOTE: The iON+ 24VBAT-LTW lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before inserting the charger plug.
• Use the battery indicator lights to determine when to charge
your iON+ 24VBAT-LTW lithium-ion battery pack.
• You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery
1. Push the push lock buttons on the battery to pull the
battery out from the battery compartment (Fig. 1).
Fig. 1
Push lock button
Battery
compartment
Battery
7
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, plug the
charger adapter into an appropriate AC power outlet.
Connect the charger plug into the charge socket of the
battery to start charging (Fig. 2).
Fig. 3
Fig. 2
Battery
indicators
3. The battery will take approximately 3 hours to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery
Scrubber head
Handle locking collar
2. Align the arrows on the pole attachment with the arrows
on the scrubber head and slide together. Use the pole
locking collar to screw in place (Fig. 4).
Fig. 4
Scrubber head
Pole locking collar
Handle
Pole
attachment
mWARNING! This charger does not automatically turn o
when the battery is fully charged. Please take care not to leave
the battery plugged into the charger. Switch o or unplug the
charger at the mains when charging is complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
Assembling Pole Attachment
1. The power scrubber should arrive pre-assembled with the
large at brush, scrubber head, and handle attached.
To add extra length by using the pole attachment,
rst unscrew the handle locking collar until the handle and
head are able to detach (Fig. 3).
3. Align the arrows on the pole attachment with the arrows
on the scrubber handle and slide together. Use the handle
locking collar to screw in place (Fig. 5).
Fig. 5
Handle locking collar
Pole
attachment
Handle
8
Changing Brush Attachments
1. To change brush attachments, simply pull the original
brush rmly o the head. Then, click the new brush into
place (Fig. 6).
3. The cone brush is moderately rm and ideal for getting
into small, hard to reach spaces like grout (Fig. 9).
Fig. 9
Fig. 6
Brush
Scrubber head
Using the Brush Attachments
1. The large at brush is the most rm, suitable for cleaning
larger areas of dust, mud, oil stains, and other heavy duty
messes (Fig. 7).
Fig. 7
Scrubber
head
Scrubber
head
Cone brush
4. The round brush is the least rm and more suitable for
curved, irregular surfaces. It is ideal for everyday cleaning,
especially on surfaces like tile and porcelain (Fig. 10).
Fig. 10
Scrubber
head
Round brush
Largeat
brush
2. The small at brush has a similar performance to the large
at brush, but is better suited to smaller areas like sink
edges (Fig. 8).
Fig. 8
Scrubber
head
Smallat
brush
Operation
To use the power scrubber, be sure to wet the intended area
and apply desired cleaning product.
mWARNING! The scrubber head is waterproof and can
be briey dipped in water. DO NOT submerge head in water
for long periods of time. DO NOT expose handle or battery to
water. If the unit accidentally falls into water, shake out loose
liquid and allow to dry overnight.
9
Adjusting Scrubber Head.
1. Push and hold down the head adjustment button to adjust
the angle of the scrubber head if desired. The scrubber
head can tilt up to 45º (Fig. 11).
Maintenance
mCAUTION! Before working on the cordless power
scrubber, switch o the unit and remove the battery from the
compartment.
Fig. 11
Head adjustment button
Scrubber head
Starting + Stopping
1. Insert the battery into the battery compartment on the
handle (Fig. 12).
Fig. 12
Battery
Battery
compartment
2. Turn the unit on by using one of the brush's two speeds.
From the middle OFF setting, slide the switch forward for
the slow setting. From the OFF position, slide the switch
back for the fast setting (Fig. 13).
Fig. 13
Middle (OFF)
Slow setting
Fast setting
Cleaning the Scrubber
It is recommended to clean and dry the power scrubber and
attachments after each use to maintain optimum functionality
for long-term use.
• Clean the scrubber and attachments with a mild detergent
and a soft sponge or cloth.
• Make sure the scrubber is completely dry before stored in
a safe, dry location. Keep the battery and motor dry at all
times.
Storage
• Store the power scrubber indoors in a safe, dry location.
Battery Caution + Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
mCAUTION! Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover
the terminals to prevent the battery pack from shorting, which
could cause a re or explosion.
mWARNING! To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead or completely discharged. When burned, toxic fumes and
materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specic information.
2. Install only new batteries of the same type in your product
(where applicable).
3. Failure to insert batteries in the correct polarity, as
indicated in the battery compartment or manual, may
shorten the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc) or
Rechargeable (Nickel Cadmium, Nickel Metal Hydride,
or Lithium-Ion) batteries.
6. Do not dispose of batteries in re.
7. Batteries should be recycled or disposed of as per state
and local guidelines.
3. When shutting down the unit, keep the brush in contact
with the surface to avoid splatter. Slide the switch to the
center OFF position (Fig. 13), and remove the battery.
10
Service + Support
If your Sun Joe® 24V-PWSCRB-LTW cordless power scrubber
requires service or maintenance, please call the
Snow Joe
1-866-SNOWJOE (1-866-766-9563).
®
+ Sun Joe® customer service center at
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
2 4 V - P W S C R B - L T W
Model #:
Serial #:
11
Optional Accessories
mWARNING! ALWAYS use only authorized Snow Joe
replacement parts or accessories that are not intended for use with this cordless power scrubber. Contact Snow Joe
®
+ Sun Joe® replacement parts and accessories. NEVER use
®
+ Sun Joe®
if you are unsure whether it is safe to use a particular replacement part or accessory with your power scrubber. The use of any
other attachment or accessory can be dangerous and could cause injury or mechanical damage.
Accessories Item Model
1
2
3
24V iON+ 2.0 Ah Lithium-Ion Battery
Battery Charge Time Max:
24VCHRG-AC: 1 hr 20 min
24VCHRG-QC: 55 min
Battery Runtime Max: 1 hr 15 min
24V iON+ 2.5 Ah Lithium-Ion Battery
Battery Charge Time Max:
24VCHRG-AC: 1 hr 40 min
24VCHRG-QC: 1 hr 10 min
Battery Runtime Max: 1 hr 35 min
24V iON+ 4.0 Ah Lithium-Ion Battery
Battery Charge Time Max:
24VCHRG-AC: 2 hrs 40 min
24VCHRG-QC: 1 hr 50 min
Battery Runtime Max: 2 hr 30 min
24VBAT-LTE
24VBAT-LT
24VBAT
4
24V iON+ 5.0 Ah Lithium-Ion Battery
Battery Charge Time Max:
24VCHRG-AC: 3 hrs 20 min
24VCHRG-QC: 2 hrs 20 min
Battery Runtime Max: 3 hr 10 min
24VBAT-XR
5
24V iON+ Lithium-Ion Battery Quick Charger 24VCHRG-QC
6
24V iON+ Lithium-Ion Battery Dual Port Charger 24VCHRG-DPC
12
Accessories Item Model
7
Large Flat Brush 24V-PWSCRB-LB
8
Small Flat Brush 24V-PWSCRB-SB
9
Cone Brush 24V-PWSCRB-CB
10
Round Brush 24V-PWSCRB-RB
11
4-PK Replacement Brushes 24V-PWSCRB-4PK
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe® + Sun Joe® to provide notice of such
changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563).
®
+ Sun Joe® customer
13
NOTES
14
SNOW JOE® + SUN JOE® CUSTOMER PROMISE
ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant
as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We
think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise.
OUR PROMISE: Snow Joe
®
+ Sun Joe® warrant new products for two years from the date of purchase. If your product does
not work, or there’s an issue with a specic part, we will x this by either sending you a free replacement part or by sending
you a new or comparable product at no charge. How cool is that! Before you know it, you’ll be back in action cutting,
sawing, mowing, washing and…?
PRODUCT REGISTRATION:
®
Snow Joe
, LLC (“Snow Joe® + Sun Joe®”) strongly encourages
you to register your purchase. You can register online at
snowjoe.com/ProductRegistration, or by printing and mailing
in a registration card available online from our website, or
calling our Customer Service Department at 1-866-SNOWJOE
(1-866-766-9563), or by e-mailing us at help@snowjoe.com.
Failure to register your product purchase will not diminish your
warranty rights. However, registering your purchase will allow
®
Snow Joe
+ Sun Joe® to better serve you with any of your
customer service needs.
WHO CAN SEEK WARRANTY COVERAGE?
®
This Warranty is extended by Snow Joe
+ Sun Joe® to the owner
of this Machine (a “Machine” consists of a product powered by
a motor) for residential and personal household use only. This
Warranty does not apply to products used for commercial, rental
or re-sale purposes. Should ownership of this machine change
during the 2-year period, please update the Machine’s owner
information at snowjoe.com/ProductRegistration.
WHAT IS COVERED?
®
Snow Joe
+ Sun Joe® warrants to the owner that if this Machine
fails within 2 years from the date of purchase due to a defect in
material or workmanship or as a result of normal wear and tear
®
from ordinary household use, Snow Joe
+ Sun Joe® will send a
replacement part or product, as needed, free of charge and with
free shipping to the original purchaser.
®
If, in Snow Joe
cannot be repaired with a part, Snow Joe
+ Sun Joe®’s sole discretion, the failed Machine
®
+ Sun Joe® will elect to
either (A) send a new Machine at no charge and with free shipping
or (B) refund the full purchase price to the owner.
WHAT IS NOT COVERED?
This Warranty does not apply to the Machines that have been used
commercially or in non-household applications. This Warranty
does not cover cosmetic changes that do not aect performance.
This Warranty is only valid if the Machine is used and maintained
in accordance with the instructions, warnings and safeguards
®
contained in the owner’s manual. Snow Joe
+ Sun Joe® will not
be responsible for the cost of any unauthorized warranty repairs.
This warranty does not cover any cost or expense incurred by
the purchaser in providing substitute equipment or service during
reasonable periods of malfunction or non-use of this product
while waiting for a replacement part or unit under this warranty.
Wearing parts like belts, augers, chains and tines are not covered
under this warranty, and can be purchased at snowjoe.com or
by calling 1-866-SNOWJOE (1-866-766-9563). Batteries are
covered in full for 90-days from the date of purchase.
Repair, replacement or refund of the purchase price are the
exclusive remedies of purchaser and the sole liability of Snow Joe
®
+ Sun Joe
of Snow Joe
under this warranty. No employee or representative
®
+ Sun Joe® is authorized to make any additional
warranty or any modication to this warranty which may be
®
binding upon Snow Joe
+ Sun Joe®. Accordingly, purchaser
should not rely upon any additional statements made by any
®
employee or representative of Snow Joe
+ Sun Joe®. In no event,
whether based on contract, indemnity, warranty, tort (including
®
negligence), strict liability or otherwise, shall Snow Joe
®
Sun Joe
be liable for any special, indirect, incidental, or
+
consequential damages, including, without limitation, loss of
prot or revenue.
Some states do not allow limits on warranties. In such states, the
above limitations may not apply to you.
Outside the USA, other warranties may apply.
®
15
sunjoe.com
Loading...