Sunix 8062-TX, 8062-GT, 8062-GS, 8082-GT 8, 8062-SS User Manual

...
771-ESWQIG0000-NCI
a
i
l
r
t
s
u
d
n
I
SWITCH
d
e
g
Industrial Management Ethernet Switches
a
n
M
a
Introduction
SUNIX Ethernet infrastructure products. SUNIX Ethernet Switches(ESW Series) are designed focus on Ethernet deployment in automation applications and specially developed for industrial Ethernet applications with all concerns for industrial environments taken into consideration. The advanced management features, Elite-Ring (communication redundancy technology), easy configuration and robust mechanical from factors enable quick Ethernet installation for factory, transportation , building and utility automation applications. Redundant power inputs and relay output alarm provides the possibility to build an on-site alarm system. SUNIX switches are ideal for any application where performance demands are highest, environments are harsh and operations are nonstop.
Features
Fast redundant ethernet ring with recovery time < 10ms (Elite Ring)
Support SNMPv1/v2c/v3 & RMON network management
Support Web-based, Telnet, Console, Utility configuration
Supports IGMPv1/v2/v3 snooping, Quality of Service determined by port
Supports port base/802.1Q VLAN and Dynamic VLAN Register Protocol (GVRP)
Event notification by Email, SNMP trap and Relay Output
Supports online port mirroring and IP security
Multi Ring and Dual Homing support
Port rate limiting and broadcast storm limiting
Redundant dual low-voltage DC inputs (12 ~ 48VDC)
Supports 802.3ad, LACP for optimum bandwidth utilization
Port Trunking for optimum bandwidth utilization
Long-haul transmission distance up to 30km (Fiber port)
Support all LAN switches setting at the same time by the SUNIX commander
Din-rail/Wall-mounting installation
Package List
Please check if the following items are present and in good condition upon opening
your package. Contact your vendor if any item is damaged or missing.
Management Industrial Ethernet Switch
Accessories
SUNIX Din Rail Accessory Package 1
Fiber Lid 2 ( For ESW-80XX-G Series Model )
SUNIX CD
Quick Installation Guide (This Document )
User Manual ( In CD )
×
×
×
Model Specification
8082-GT
8082-GP
8062-GM
8062-GS
8062-GT
8062-TX
8062-MM
8062-SS
8 Ports10/100Base-TX+2Ports10/100/1000Base-TX
8 Ports10/100Base-TX+2Ports1000Base-FX (SFP Type)
6 Ports10/100Base-TX+2Ports1000Base-SX Multi Mode()
6 Ports10/100Base-TX+2Ports1000Base-LX Single Mode()
6 Ports10/100Base-TX+2Ports10/100/1000Base-TX
8 Ports10/100Base-TX
6 Ports10/100Base-TX+2Ports100Base-FX(MultiMode)
6 Ports10/100Base-TX+2Ports100Base-FX(Single Mode)
DIN-Rail Installation Step
Quick Installation Guide
Wall-Mounting Installation Step
Version 1.0
Elite-Ring Technology
Redundancy is always a primary consideration for developing secure and reliable industrial networks. SUNIX Managed Switches are equipped with Elite-Ring feature which provides industrial Networks with high-speed communication redundancy.
A network can recover in less
than 10ms.
Elite-Ring employs a ring structure of either copper or fiber optic cable or combination of both by using two ports of each switch in a ring network.
SUNIX Comander Management Utility Software
SUNIX Commander is a powerful Switch managed software designed by SUNIX Group. It could provide users set up all Switches in the ethernet by one time. Users could set up one group Switches IP Address, every kind of IEEE 802 Protocol, upgra e at the same time. SUNIX
managing software lowers users' burden and saves time.
d Commander a strong
a
Quick Installation Guide
i
l
r
t
s
u
d
n
I
Version 1.0
SWITCH
d
e
g
Industrial Management Ethernet Switches
a
n
M
a
ESW-8062 Front Panel
No.8 LANPort
No.7 LANPort
No.5 LANPort
No.8 FiberPort
No.8 FiberACK/LINK LED
No.7 FiberPort
No.5 LANPort
ESW-8062 Front Panel (With Fiber Ports)
Switch ReadyLED
Power-1 OnLED
Power-2 OnLED
Elite RingMaster LED
Elite RingEnable LED
Fault DetectionLED
Serial ConsolePort
Reset Button
No.6 LANPort
ESW-8082-GT Front Panel ESW-8082-GP Front Panel
No.10 LANPort
No.9 LANPort
No.7 LANPort
No.5 LANPort
10
9
No.10 FiberPort
No.10 FiberPort
No.7 LANPort
No.5 LANPort
10
9
Switch ReadyLED
Power-1 OnLED
Power-2 OnLED
Elite RingMaster LED
Elite RingEnable LED
Fault DetectionLED
No.8 LANPort
No.6 LANPort
No.3 LANPort
ACT/LINK LED(Green)
No.1 LANPort
Full SpeedLED (Orange)
Bottom View (8062)
TerminalBlock Type Power-2 In
Relay Warning Output Pin
TerminalBlock Type Power-1 In
Ground
No.3 LANPort
ACT/LINK LED(Green)
No.1 LANPort
Full SpeedLED (Orange)
12~48VDC Adapter
No.4 LANPort
No.2 LANPort
Bottom View (8082)
TerminalBlock Type Power-2 In
Relay Warning Output Pin
TerminalBlock Type Power-1 In
Ground
No.3 LANPort
ACT/LINK LED(Green)
No.1 LANPort
Full SpeedLED (Orange)
12~48VDC Adapter
No.3 LANPort
ACT/LINK LED(Green)
No.1 LANPort
Full SpeedLED (Orange)
Copyright© by SUNIX Co, LTD.
All rights reserved.
TEL: +886-2-8913-1987 FAX: +886-2-8913-1986
Website: www.sunix-ncci.com.tw E-mail: info@sunix-ncci.com.tw
No.4 LANPort
No.2 LANPort
Loading...