Sunitec Enterprise BT User Manual

SUNITEC ENTERPRISE CO.,LTD www.sunitec.com

Bluetooth USB_Headset Combo(BTH-07C)User Manual

About Bluetooth Technology?

Bluetooth makes wireless transmission between all mobile and non-mobile facilities possible. This

technique utilizes global sound & digital data 2.4G ISM transmission and makes global communication easily.

How does Bluetooth COMBO help you?

This multi-functional Bluetooth COMBO consists of Headset and Dongle – Class 2. (to be referred as

COMBO.)

(A) Headset:

When it’s under Headset mode, supports all Bluetooth mobile phones and facilities with Bluetooth audio

transmission. Powered by a built-in rechargeable battery, it can be either charged via the attached mini

AC/DC charger or via the built-in USB connector to the PC USB port.

This Bluetooth Unit

(a) It wirelessly activates phones located in anywhere within 10 meters(max.) to this unit.

(b) Voice Activation: To voice activate phone through microphone of this unit or phone itself, subject to phone

built-in with voice activation function.

Simply press the multi-function key on this unit.

(d) Volume Adjustment: Simply tune the built-in volume switch to adjust volume.

(e) It makes real Hands-Free & safe driving possible.

(B)

Dongle:

When it’s under USB mode, with the attached Windows driver, it support most of the common Bluetooth

profiles such as Mobile Phone, Digital Camera, P.D.A., Printer, Mouse, Fax, Bluetooth Serial Port, File

Sharing/Transmission, Network Access, Object Push, Dial-up Network, LAN Access,…, etc. It’s the most

efficient tool to communicate with the latest Bluetooth-enabled devices. To use, please refer to the attached

Window Driver CD.

Working Mode:

The COMBO is a combination of Headset and Dongle. It’s auto switching in between the two modes by detecting the external connections. It’ll be only switched to USB mode, when it’s connected to the USB port of PC. Under normal status, without connecting to USB port, it’s always under headset mode.

SUNITEC ENTERPRISE CO.,LTD www.sunitec.com

Instruction for Headset Mode:

Preparation & Start to Use:

Make sure the phone is with Bluetooth function or connected to Bluetooth Adaptor.

First Time Use:

(A) Pairing this unit with phones - Configuration set up.

(B) Locate this unit to phones within 10 meters(max.).

(approx.)

(D) Please refer to Bluetooth function access of each phones. (Bluetooth access could be varied between

different phones.)

For ERI Phones:

(A) Enter into Pairing Mode:

(a) This unit is first set under off mode - LEDs are off.

(b) To enter into pairing mode, press function key for 7 seconds (approx..) until red & green LEDs blink in turn.

Mean while, a short beep will come up.

(B) Pairing Between Phones and Headset:

(a) Initiate Bluetooth function of phones & search for Bluetooth devices.

For example: ERI T68i, procedure is "Menu/Connect/Bluetooth/Paired Device/Add Device/Phone initiates/All

types"

(b) Phones will start searching for Bluetooth devices. If it's successful, phone screen will indicate the name of

obtained device - “Earpiece”(This can be customized upon customer's request.) Press "Yes" to pair this unit to

the phones.

complete pairing. (Pairing procedure might be varied because of different phones. Users are recommended

to refer to individual User's Manual.) Mean while, this unit is under stand-by mode - green LED blinks once

every 4 seconds.

(d) To remove pairing, constantly press function key for 3 seconds until both green & red LEDs are off. Mean

while, a short beep comes up.

Once pairing is successful, this unit is under stand-by mode and ready for Bluetooth communication.

Please locate this unit within 10 meters (max.) to phones.

(a)To Answer a Call:

When a call is in, a ringing tone will come out of this unit. Press function key, up & down, to answer a call.

(User may press phone key to answer, too.) Once it's under talking status, green LED blinks twice every 1.5

seconds.

(b) Not to Answer a Call:

When a call is in, a ringing tone will come out of this unit. If user doesn't intend to answer this call,

constantly press function key, up & down, for 3 seconds until ringing tone is off.

After pairing is done, user may dial out numbers through phones and talk through this unit. During

conversation, green LED blinks once every 1.5 seconds.

(d) Voice Activation:

SUNITEC ENTERPRISE CO.,LTD www.sunitec.com

To voice dialing, under stand-by mode, press function key, up & down, to enter into Bluetooth connection mode

- green LED blinks once every 1.5 seconds with a short beep coming out of this unit. User may talk to mic. of

this unit for voice dialing. If it's successful, green LED stays blinking once every 1.5 seconds. If not

successful, this until will resume stand-by mode - green LED blinks once every 4 seconds. Users are

recommended to refer to voice dialing procedure of individual phone.

(e) Volume Adjustment:

Simply adjust the function key, left & right, to adjust volume.

(D) LED Indication (Single LED, Bi-Colored.)

Status

Operation Battery Normal Battery Low

LED Indication

Power OFF

Stand-By

Incoming Calls

Outgoing Calls

Charging:

Under Charge

Fully Charge

Pairing:

Processing

Successful

LEDs OFF LEDs OFF

Green LED blinks once every 4 seconds Red LED blinks once every 4 seconds

Green LED blinks twice every 1.5 seconds Red LED blinks twice every 1.5 seconds

Green LED blinks once every 1.5 seconds Red LED blinks once every 1.5 seconds

Red LED blinks once every 0.5 seconds

Green LED blinks once every 0.5 seconds

Red & Green LEDs Blink in turn

Green LED blinks once every 4 seconds Red LED blinks once every 4 seconds

(E) Function Key– Up & Down Press: (a)Short Press:

To change from stand-by mode into automatic Bluetooth connection mode, vice versa.

Constant 3-second Press:

(b)

To change from stand-by mode into off mode.

To change from paired mode into off mode.

(c)Constant 5-second Press:

To change from off mode into stand-by mode.

(d)Constant 7-second Press:

To change from off mode into pairing mode.

Instruction-NKI Phones

(A) Enter into Pairing Mode:

(a) This unit is first set under stand-by mode - LEDs are off.

(b) To enter into pairing mode, press function key for 7 seconds (approx.) until red & green LEDs blink in turn.

Mean while, a short beep will come up.

(B) Pairing Between Phones and Headset:

(a) Initiate Bluetooth function of phones & search for Bluetooth devices.

For example: NKI 8910, procedure is "Menu/Bluetooth/search for audio accessories"

(b) Phones will start searching for Bluetooth devices. If it's successful, phone screen will indicate the name of

obtained device - “Earpiece” (This can be customized upon customer's request.) Press "Yes" to pair this unit

to the phones.

+ 4 hidden pages