Sunitec Enterprise BH001 User Manual

®

V

User Manual English

SUNITEC ENTERPRISE CO., LTD.

Email: [e-mail] http://www.sunitec.com.t w

BH670 User Manual

Appearance and Function

V+

Button Function

Power On/Off
Pairing
Connect AG Service

“MFB”

Multi-Function Button

“V+” and “V-”

Volume Button
Passkey Code Code: 0000

Receive Call
End Call
Voice Dial
Reject Call
Redial
Volume Control
Mute
Call Transfer

-

MFB

BH670 www.sunitec.com.tw 第 1页, 共 4页

®

User Manual English

1. Introduction

This versatile Bluetooth Stereo Headset is specially designed for user to enjoy convenience of wireless communication. It
complies with Bluetooth V2.0+EDR specification that gives you the sound quality you've never experienced.

2. About Bluetooth Technology

Bluetooth wireless technology is set to revolution iz e the personal connectivity. By providing freedom from wired
connections-enabling links and connectivity between mobile computers, mobile phones, portable handhel d devices and
other Bluetooth enables devices within 10 meters. Utilizing global sound & digital data 2.4G ISM transmission, it makes
global communication in the way you've never dreamed of!

3. Product Specification

Bluetooth Specifications: V2.0+EDR
Bluetooth Profile Supported: Headset and Hands-Free Profiles
Working Distance: Classs 2, 10 meters
Support Multiple Pa iring. (Up to 8 Bluetooth Phone can be paired, use one device at each time.)
Operating Frequency Band: 2.402 to 2.480GHz Spectrum
Battery Tye: AAAA battery x 2pcs
Talk Time: Up 40 hrs. This could be varied because of power consumption difference of various phones.
Standby Time: Up to 600 hr s.
Headset Dimension: 48mm(L)x22mm(W)x16mm(H)
Headset Weight: 24g

4. Getting Start

A. Battery
(a) Please install the 2pcs “AAAA” batteries in the heaset before using.
(b) Low Voltage Indication: When the battery voltage is low, the headset will emit 2 beeps every 30 seconds and the Red
LED will be flashing. Plea se change the new battery.

B. Powering On
When the headset is unde r off mode, press and hold the “MFB” for 3 seconds, then the headset will be turning on. The
earpiece will emit 1 beep sound, and the Green LED will be flashing 5 pulses.

C. Powering Off
When the headset is under standby mode, press and ho ld the “MFB” for 3 sec ond s, then th e hea dse t w ill be tu rn ing off.
The earpiece will emit 2 beep sounds, and the Red LED will be flas hing 5 pulses.

D. Pairing
Prior to using the headset fo r the first time, you must pair it with a Bluetooth-enabled mobile phone. The following steps
describe pairing instruction for a typical Bluetooth-enabled mobile phone.
(a) Place the headset and mobile phone within 1 meter apart.
(b) Ensure the headset is turned off.
(c) Press and hold the “MFB” for 5 seconds until the headset’s LED f lashes red and green alternately. It is now ready for

BH670 www.sunitec.com.tw 第 2页, 共 4页