Sunfull 1002-ARM, 2004-LITE, 2004-ARM, 2004-A9, 1022-1U Instructions For Installation Manual

Instruction for installation

Suitable gateway type（1 network port 2 serial port）
Model:BAC1002-ARM MOD1002-ARM HUB1002-ARM SNMP1002-ARM

1.0 software configuration step (refer to the relevant configuration software operation manual)
please confirm the following:

- the configuration project is correct;

- upload engineering files to the gateway (note not download works)

- simulation test to collect data;

2.0 gateway graphic

Wall type installation gateway size:129mm×109mm×27mm(L×W×H) weight：200g
Guide rail installation gateway size: 129mm×86mm×34mm(L×W×H) weight：200g
Power: AC/DC 9~24V (rated power 5 W);（V+ , V-）

Gateway:

3.0 wiring description:

Ethernet network: if the network port protocol is used, the default IP address is 192.168.1.88.

Reset: when the user forgets the gateway IP address, the user can press the Reset button until the
gateway "tick" and the network port temporarily restore the default IP address, and then log in

192.168.1.88 to check the original IP address of the gateway.(the operation takes effect immediately,
and fails after power failure)
RS485 interface: 2 total isolation RS485 interface A (+) B negative (-)
RS232 interface: 2 full isolation RS232 interface (note: reusing relationship with RS485)
Rx (2) TX (3) GND (5)
DB9-M Gateway RX (2) ~~ device TX (3)

Gateway TX (3) ~~ device RX (2)
Gateway GND (5) ~~ equipment GND (5)

DB9-F Gateway RX (2) ~~ device RX (2)

Gateway TX (3) ~~ device TX (3)
Gateway GND (5) ~~ equipment GND (5)

4.0 login gateway Web server
The network line receives the Ethernet, the default IP address: 192.168.1.88 login user name:
admin password: admin123456

Note: download gateway configuration software after entering the web server, please refer to the
PDF document under the Help folder for specific operation.

5.0 common problems
Question 1: how to change the IP address?
Answer 1: gateway factory default IP address 192.168.1.88, subnet mask 255.255.255.0, default

gateway 192.168.1.1.
Users to use for the first time with a computer and gateway with cable local docking, then change the
IP address to the computer and the gateway within the same network segment in able to ping the
gateway IP address, open a browser and enter the gateway IP address 192.168.1.88, can login gateway
Web server, as shown above in the "front-end ports set" column set IP address.

Q2: what if the project files are saved in the computer?
Answer 2: login gateway, WEB page "download file" to have the last project file backup, download

can.

Q3: what is the difference between different models of the gateway hardware?
Answer 3: the main models are as follows:

Model

Hardware Parameter

Interfaces

Supported

Points

Supported Port

1002-LITE

CPU：240MHz
Memory：32M

1 ethernet

2 serial ports

256

2 RS485 & 2

RS232

1002-ARM

CPU：240MHz
Memory：32M

1 ethernet

2 serial ports

256

2 RS485 & 2

RS232

2004-LITE

CPU：400MHz
Memory：64M

2 ethernets

4 serial ports

1024

4 RS485

2004-ARM

CPU：400MHz
Memory：64M

2 ethernets

4 serial ports

1024

4 RS485

2004-A9

CPU：1.4GMHz

Memory：512M

2 ethernets

4 serial ports

2048

4 RS485

1022-1U

CPU：400MHz

Memory：DDR2

1 ethernets

4 serial ports

1024

4 RS485

Sunfull Gateway model

BACnet Gateway:BAC1002-LITE (economical),BAC1002-ARM,BAC2004-LITE(economical),

BAC2004-ARM, BAC2004-A9

Modbus Gateway: MOD1002-LITE (economical), MOD1002-ARM, MOD2004-LITE (economical),

MOD2004- ARM, MOD2004-A9

Modbus Hub Gateway: HUB1002- ARM, HUB2004-ARM
SMS Alarm Gateway: HMI2004-A9-GPRS
SNMP Gateway: SNMP1002- ARM, SNMP2004-ARM
IEC104 Gateway: IEC 2004-ARM
WEB Configuration Gateway: HMI2004-A9-GW

Sunfull WEB Touch Panel series

Basic version: W7-1041

Gateway version: W7-1041-GW, W10-1041-GW, W15-1041-GW

Sunfull Software Gateway

OPC transfer BACnet: O2B- Softkey, O2B-USBkey
OPC transfer Modbus: O2M- Softkey, O2M-USBkey
OPC transfer Modbus- cloud: O2M-WEB- Softkey, O2M-WEB-USBkey
OPC transfer IEC104: O2I-Softkey、O2I-USBkey
OPC transfer SMS: O2S-Softkey、O2S-USBkey
OPC transfer Web: O2W-Softkey、O2W-USBkey
OPC transfer SNMP: OtS-Softkey、OtS-USBkey

Sunfull OPC server

OPC server: X2O- Softkey, X2O-USBkey
OPC server: OPCHub

Sunfull Free Software

BACnetScan scanning tool, MBUS scanning tool, Niagara interface, and WEBS interface

Welcome to follow Shanghai Sunfull’s wechat public number : BACnet

to know more new products and solutions.

Shanghai Sunfull Automation Co., LTD. TEL: [phone]
Address: A466,building1, NO.2588,JinhaiRoad,Pudong,Shanghai,China
Technical support E-mail: [e-mail]
Technical support Tel: [phone] Website 1: www.bacnetchina.com
SalesTel: 13564889340 Contacts: Linda Chen Website 2: www.opcmaster.com