![](/html/21/21f2/21f2443784b5d33403d53ab52e9a43e36786390c52bf7005c7066c5a6da2d35f/bg1.png)
Read Entire Manual Before Operating Device
USER INSTRUCTION MANUAL
SAPPHIRE SERIES 1100 & 1100EC
OI-S1100401-401.5
Uncontrolled Document
Rev. 6.0 - 06/23/2006
1
![](/html/21/21f2/21f2443784b5d33403d53ab52e9a43e36786390c52bf7005c7066c5a6da2d35f/bg2.png)
SAPPHIRE SERIES 1100 & 1100EC
PLEASE NOTE: It is important that the user read the entire manual before
operating this device.
USER ASSISTANCE INFORMATION:
If you have questions or need assistance with this product, call the company from whom it was
purchased, or contact Sunflower Medical L.L.C. at
1-888-321-3382
Table of Contents Page
General Warnings and Precautions 3
Purposes of the Device 3
Description of the Device 4
Unpacking/Parts Breakdown 4
Operating Instructions 5
Key Pad Quick Reference 7
Mattress and Blower Unit Cleaning 8
Maintenance 9
Storage 9
Troubleshooting 9
Frequently Ordered Parts 10
Return/Exchange Goods Policy 11
Warranty Provisions 11
Technical Description of the Equipment:
The two principle components of the Sunflower Medical Sapphire Series 1100 & 1100EC
Mattress System are a specialized air inflatable bladder (Air Mattress) and an electrically
powered, Air Blower/Control Unit.
User Assistance 2
2
![](/html/21/21f2/21f2443784b5d33403d53ab52e9a43e36786390c52bf7005c7066c5a6da2d35f/bg3.png)
GENERAL WARNINGS AND
PRECAUTIONS
WARNINGS
PRECAUTIONS
CAUTION: DO NOT use around an open flame.
CAUTION: The housing of the master control unit should only be opened by qualified
CAUTION: Electric Powered Mechanism. Electrical Hazard may occur if device is
WARNING: DO NOT use this device if the power cord is cut, frayed or loosely
connected to the device.
WARNING: Make sure power cord is plugged into a properly grounded A/C 110V
outlet.
technical personnel. Before opening the housing, make sure the unit is turned off and
unplugged from its power source.
plugged into inadequate electrical outlet. To avoid electrical shock hazard, make sure
unit is plugged into a grounded A/C 110 Volt outlet.
PURPOSE OF THE DEVICE
The purpose of the Sapphire Series 1100 & 1100EC Mattress System is to provide therapeutic
benefit to patients at risk or suffering from pressure ulcers.
The active component that has contact with the patient is a specialized, multi-cell air mattress
sized to fit a standard medical bed frame. The air mattress serves to replace the original mattress
and is equipped with 4 air hoses with connectors that mate with the Air Blower/Control Unit.
The Control Unit is a self contained, totally enclosed module that hangs by retractable hooks on
the bed frame at the foot of the bed or sits on the floor under the bed.
It is provided with a hospital grade electrical cord and a control panel that has selector switches
and indicator lights. The switches and indicators are protected under a flexible membrane to
keep out liquid spills and enhance clean-up and sanitation. Inside the Control Unit is a variable
output blower, a valve motor and air valves that allow the air mattress to operate in static mode
or provide alternating pressure variations within the mattress. There is also a printed circuit
board, which provides the electrical controls. The Control Unit has one user replaceable 250v
5.0 amp fuse near the AC Power Cord Entry.
3
![](/html/21/21f2/21f2443784b5d33403d53ab52e9a43e36786390c52bf7005c7066c5a6da2d35f/bg4.png)
DESCRIPTION OF THE DEVICE:
The Sapphire Series 1100 & 1100EC Mattress Replacement System consists of a control unit,
power cord, a Low Air Loss Mattress and a waterproof, vapor permeable, easy-to-clean cover.
UNPACKING / PARTS BREAKDOWN:
Parts
- Air Blower/Control Unit
- Power Cord (hospital Grade)
- True Low Air Loss Mattress Replacement
- Mattress Cover
Tools Required: NONE
Unpacking instructions: Remove the products from the packing material and examine for
shipping damage. If damage is detected in shipping, contact the freight company and file a
damage complaint immediately.
Directions for Mattress Placement: Replace the existing bed mattress with True Low Air Loss
Mattress. Secure Air Mattress to the bed frame with straps provided.
Warning or Safety Instructions relating to setup:
Air Blower/Control Unit and
Power Cord
True Low Air Loss
Mattress and Cover
WARNING: Make sure the power cord is plugged into a properly
grounded A/C 110 Volt outlet.
4