Wireless IP Camerea
SunEyes Group Co.,Ltd
User Manual
SP-FJ01W SP-FJ02W
User manual
2
Contents
1 WELCOME..................................................................................................................-3-
1.1 Features................................................................................................................-3
1.2 Pcking list.............................................................................................................-4-
1.3 Product view.........................................................................................................-4-
1.3.1 Front View..........................................................................................................-4-
1.3.2 Rear Panel........................................................................................................ .-5-
1,4 PC System Requirements....................................................................................-5-
1.5 Hardware Instruction............................................................................................-6
1.6 Software installation.............................................................................................-6-
2 SOFTWARE OPERATION.......................................................................................... -8-
2.1 IP Camera Finder .............................................................................................-8-
2.2 Camera Login.......................................................................................................-13
2.3 Camera Icon Functions.................................................................................... -15
2.4 Setting details(user&password)………………………………………………………16
2.4.1 Multi-Device Settings...................................................................................- 17
2.4.2 Network Settings..........................................................................................- 19
2.4.3 Wireless Settings ................................................................................ ………19
2.4.4 DDNS Service Settings...................................................................................20
2.4.5 Mail and FTP Serivce ......................................................................................21
2.4.6 Motion Detection Alarm……………………………………………………………22
3 IP Camera Super-Client Software..............................................................................-24
3.1 Step by step to use..............................................................................................-24
3.2 Add Equipment IP Camera...................................................................................-25
3.3 Email&Motion Detection Alarms Settings …………………………………………27
3.4 Record Settings by Schedule……………………………………………………..-…..28
3,5 Paly Back the Videos ...................................................................................-…….28
3.6 Setting Storage Path ...........................................................-………………………29
3.7 More details help about this software…………………………………………………30
4 How to View the Camera at outise networks and on Mobile phone,Iphone………..31
4.1 Using a Router to acess the internet.....................................................................-31
4.1.1Do Port Forwarding in the LAN Routers ...................-………………………………32
4.2 Static IP User ……………………………………………………………………………….33
4.3 How to use other DDNS......................................................................................-….34
4.4 how to surveillance from iphone ,Smart phones...................................................34
4.1.1 Use the Mobile Phone Browser….…………………………………………......…-34
4.1.2 Use the Mobile Software………………………………. …………………......…...-36
5 FAQ………………………………………………………………………………………………39
1 WELCOME
User manual
3
IP Camera is a new generation product combined with analog camera & IP video
technology. Despite all functions which analog cameras have, IP camera can compress and
encrypt video and audio signal then through internet send them to remote terminals with its
built-in processor and web server. Via its IP address, users can use standard PC IE browser to
visit IP camera, real time monitor targets, manage and store video or image. PT control also is
available through network.
Being a new member of camera family, IP camera shares the same operation functions
with the analog camera, such as, auto white balance, auto shutter speed, AGC, auto backlight
compensation etc. On the other hand, IP camera supports remote access through internet and
multi-user visit. Some IP cameras are able to extend to both analog and digital signal.
F series IP camera‘s core is 32Bit RSIC. It adopts standard MJPEG compression format.
The camera sensor is CMOS which supports auto white balance and backlight balance,
support IE, cell phone browser, centralized monitor interface management. In general, as its
function of audio simplex & duplex, infrared, wired, wireless, local storage, it has hundreds of
products, to meet requirements of various kinds of users.
1.1 Features
MJPEG video compression
Wireless(Wifi 802.11B/G/N,WEP,WPA,WPA2)
Remote Pan Tilt (P: 355°T:90°Speed adjustable) (SP-FJ01W)
IR night vision(Range:10~15m)
Support two-way audio function (SP-FJ01W)
High-sensitivity CMOS sensor
Resolution:640 x 480(VGA), 320 x 240(QVGA)
Video Frame Rate:25fps(QVGA), 15fps(VGA)
Minimum Illumination:0.5Lux @ F2.0
Supports control P/T through IP network(SP-FJ01W)
Support auto Pan Tilt(SP-FJ01W)
Supporting up to 4 users online simultaneously
Supporting image snapshot and video record
Support image flip ,mirror
Brightness and Contrast adjustable
Built-in 10M/100M auto MDI/MDIX Ethernet interface
Light Frequency:50Hz, 60Hz or Outdoor
Multi-level users management and passwords definition
Built-in Web server, supports remotely viewing and/or management the camera form a
standard Web browser on any computer which can trhough internet.
Supporting Dynamic IP (DDNS) ,Buit-in Free DDNS
Giving alarm in cause of motion detection, sending pics to email or FTP, record videos on
pc when alarms.
Supporting multiple network
protocols:HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP
User manual
4
Support mobile surveillance like Smart phone,3G phone,IPhone,PDA,etc.(Has APP Soft)
Free 81ch professional software clients support.
Ten language (English, Simplified Chinese, Traditional Chinese, Spanish, French,
Russian, Polski, Italian, German, Portugal) support
Support Firefox browser
Reset button available if lost password
1.2 Packing List
Untie the pack and check the items contained against the following list;
Wireless IP Camera 1
Wi-Fi Antenna 1
DC Power Supply 1
CD 1 (User Manual﹑software)
Mounting bracket 1
NOTE:Contact us immediately in the case of any damaged or short of contents.
1.3 Product views
1.3.1 Front view
SP-FJ01W SP-FJ02W
1.3.2 Rear panel
User manual
5
LAN: RJ-45/10-100 Base T
DC5V: 5V/2A Power supply
RESET BUTTON: press and hold down the RESET BUTTON(Figure 1.3 underpan)
for 7-10 Seconds .Release the reset button and IP Camera will be reset back to the
factory default Parameter.
1.4 PC System Requiements
Minimum Hardware Configuration
CPU: Pentium 1.6 GHz
Memory: 256MB
Audio card: need audio monitor, two way talkback essential
Hard Disk : if need to record video image，no less than 40G
Operation System: 32 bit simple/ English Windows2000、Windows XP、
Windows2003、Windows Vista & 64 bit simple Chinese/English Windows2003、
Windows XP、Windows Vista etc.
Software environment
IE 5.0 or above version
DirectX8.0 or above version
TCP／IP network protocol
1.5 Hardware Instruction
User manual
6
Follow the steps below to set up your camera hardware.Make sure to follow each step
Carefully to ensure that the camera operates properly
1) Plug the network cable into the camera and then into your Cable/DSL router.
2) Plug the power adapter into the camera and then into the power outlet.
1.6 Software installation
Software installation is the key to the successful use of this product.
1 Open the CD,find the software as instruction;
2 Double click Super Client and install the software as instruction.
3 Only click Next,you will complete the software installation.
User manual
7
From the computer desktop you can find an icon appears on
the Desktop automatically.
NOTE:Before installing and using the product, please read the following precautions
carefully and make sure they are fully understood.
Use only the power adapter attached with the product .Use of unauthorized power
adapter may cause damages to your IP Camera.
Do not touch the lens of the IP Camera at will .The optimum focus range has been set
before the IP Camera is delivered out of the factory. If you turn the lens,it may cause
incorrect focus and vague images.
Do not turn the Pan/Tilt by force for it may cause damage to intemal components of
the Pan/Tilt.
IP Camera terminal shall be installed in an indoor environment.(SP-FJ01W)
User manual
8
2 SOFTWARE OPERATION
2.1 IP Camera Finder
When the Device has been mounted properly, you can double click the Icon “IP Camera
Wizard” and a dialog box will pop up.
Wizard Mode(if you not familiar the settings pls chose this mode):
User manual
9
User manual
10
(you can use One key Set or Manually set)
User manual
11
Advanced Mode (if you are already familiar with the settings pls chose this mode):
Basic Properties
There are some device informations in the Basic Properties ,such as Device
MAC,System Firmware Version, Web UI Version.
User manual
12
Note: The software searches IP Servers automatically over LAN.
1 .The ip camera and the pc should be in the same LAN, if you not familiar how to
configure your ip you can use one key set
2 To install more than one cameras in the LAN,all of the cameras port and IP
address can not be same.
3. pls make sure the camera ip address is in the same subnet as the gateway
(i,e .the first three sections are the same)
4.Mask: The default subnet mask of the equipment is :255.255.255.0
5.Gateway: Make sure it is in the same subnet with PC IP address .Default
Gateway address is 192.168.1.1
6.DNS: IP address of IPS network provider.
7.Port:LAN port assigned for the equipment, usually 81-10000
8.User & Password : Default administrator username/password: admin?No
password
User manual
13
2.2 Camera Login in IE (LAN)
You can access the camera through IP Camera Tool or IE directly.
1) Click the inner RUL: “open”
2) It will start your web browser automaticly.
Enter your account and password on the login page as shown above
Administrator’s username is: admin and no password… Sign in with ActiveX Mode(for IE)
User manual
14
2.3 Camera Icon Functions
Rotate the cameras(pan/title)
Auto Pan/Titlt Ajust Pan/Tilt Speed:
If you want to detect 4 or 9 views, need to click this ico
Flip: To see the flip image.
User manual
15
Mirror: To see the mirror image.
Resolutions: can chose 320*240 or 640*480
Mode: can chose 50HZ ,60HZ or outdoor
Brightness and Contrast:can set the brightness and contrast
Record:Click icon to record videos
Snapshot: Click icon to snap the picture.
AUDIO: Click icon Camera MIC open, Local Voice input
TALK: Click icon Camera Speaker open, Remote Voice Output
2.3 Setting Details :
User manual
16
Alias Serrings: You can Input the new name as you like.
Data&Time Settings: Data&Time Settings page.
Users Settings:Eight accounts are acceptable for this system.Here the eight users can
Configure their user names and password as administrator,Operator or Visitor.
Administrator:You can sertup the advanced configurations of the IP Camera.
Visitor: In this mode ,you can only view.
Operator:You can control the direction of IP Camera and set some parameter.
User manual
17
2.4.1
Multi-Device Settings
Use multiple cameras in LAN
In the Multi-Device Settings page, you can see all devices searched in LAN. You can add
more cameras list in LAN for monitoring
User manual
18
2.4.2 Network Settings:
Http Port: if multi cameras this port cannot be same in one LAN.
2.4.3Wireless Lan Settings:
Click the Scan button (at least two times),select your wifi SSID, and write in your wifi’s
password.
User manual
19
ADSL Settings ( pls don’t use it ,if you use routers)
When connected to the Internet through ADSL directly ,you can enter the ADSL username
and password obtained from ISP.
2.4.4DDNS Service Settings
DDNS Service: The system support protocols from some DDNS providers,and our own
ddns IPCAM( built-in)..
User and Password: the user name and password used when applying for the domain
name .(if use our Built-in ddns, and you can find the ddns user and password from the
label of ip camera)
DDNS or Proxy Server: If you access the DDNS host through a proxy, you should input
the Proxy IP.(if use our Built-in ddns,it’s should be user.suneyes.hk)
DDNS or Proxy Port: Proxy Port.(if use our Built-in ddns, the port should be 808 or 80)
User manual
20
2.4.5Mail and FTP Service
Configure the E-mail box to receive and send mails. The E-mail box is used for receiving
the images sent after alarm and the system IP address after successful dial-up.
User manual
21
Settings the FTP Service:
2.4.6Alarm Service Settings:
Enter Alarm Service Settings page to configure Motion Detection function.
Sheduler
You can set the exact time when the alarms will be open on.
Send Mail on Alarm
User manual
22
Sent picture and mail inform to customer’s e-mail after alarmed. (firstly you should finish
the Mail Service Settings.)
REC automatically and save to PC
When you enable motion detect and open the camera monitoring page on the PC. If there
is an alarm triggered, REC will start automatically for several seconds and save to the PC.
PTZ Settings,(here you can set the speed of pan/tilt)
L
User manual
23
og
Maintenance:
Upgrade Device Firmware: pls follow your supplier instructions ,pls do not upgrade
yourself.
Restore Factory Settings: Restore factory settings of the device.
Reboot Device:Rebboot the device.
3 IP Camera Super-Client
3.1 Step by Step
User manual
24
Registery ( you can find the register code from the label of disc ):
:
3.2 Search and Add equipment:
User manual
25
LAN:(local network)
WAN(outside network):
if you are using our built-in ddns:
User manual
26
if you use your own ddns:
User manual
27
3.3 Email&Motion Detection Alarms Settings
User manual
28
3.4 Record Settings by Shedule
3,5 Paly Back the Videos
Click
User manual
29
3.6 Setting Storage Path
Click
User manual
30
3.7 More details help about this software…
click
4.HOW TO View in Outside Netwrok
4.1Using a router to access the Internet
Using a router to access the Internet by shared ADSL If a router is set for dial-up
Internet access, it is not required to set ADSL dial-up account and password on the IP
Camera.
User manual
31
4.1.1 Do port forwarding in your routers:
User manual
32
1) Pls make sure the Server IP Address,start port and end port be same with your
camera’s.
2) Enter IP Camera Wizard to set the basic configuration,
3) Login the Camera homepage as Administration.
4) Enter DDNS Settings Page and ennable DDNS service. Click <Submit> and the
device will reboot
5) You can access the Camera from Internet by domain name( like:
http://demo.suneyes.hk )
4.2Static IP user
Static IP user is not need to use DDNS for remote access. When finished the setting of
the IP Camera in LAN, and port forwarding in the routers,you can access the Camera
directly from Internet by the WAN IP. You can obtain the WAN IP by two ways.
Obtain the WAN IP address from the router
User manual
33
Take the WRT54G router of LINKSYS for example,
1) Obtain the IP address of the router (LAN gateway address), user name and
password for logon to the router from the network administrator,
2) Enter the LAN IP address of the router; Open the Status page to find out the WAN
address of the router. In this example, the address is 116.25.51.115.
Access the IP Camera from the Internet
User can access the IP Camera from the Internet, by enter WAN IP address + port
number in the IE to access different IP Cameras. For example,
Http://116.25.51.115:81 or Http://116.25.51.115:812
4.3How to use other DDNS
For each ADSL reconnection, ISP will re-assign a new IP address for the IP Camera to
facilitate the access. DDNS( Dynamic Domain Name Server) can map the dynamic IP
address of an IP Camera to a fixed domain name. Therefore, we can access the IP
Camera by the fixed domain name whether the IP address changes or not. The IP
address is not necessary when you using the DDNS via the domain name to find your
network.
1) Go to the website which Provides free domain name, register and apply a free
domain name. such as http://www.dyndns.com/
2) Login the Camera homepage as Administration and enter “DDNS Service
Settings” page input the name, password and Host . Then click<SUBMIT> and
reboot Device.
3) Re-login the Camera homepage and enter “DDNS Service Settings” page to check
the DDNS Status is DynDns Succeed or not.
User manual
34
4) You only need to enter the domain name(domain name+Port number
http://suneyes.kicks-ass.net:81/ ) in the IE address bar, the browser will visit the IP
Camera.
If multiple IP Camera are connected to the same router, enter DDNS dynamic domain
+port number (for example, http://suneyes.vicp.net:85/ ) in the address bar of the IE to
access different IP Cameras .
4.4 How to Surveillance the camera from iphone, mart phone,etc.
There are two path to realize the mobile surveillance.
1> Use the mobile phone browser (support iphone Safari,opera mobile,etc.)
2> Use the mobile software to realize the surveillance.
4.4.1 Use the mobile phone browser
Marks: before do that,pls make sure your camera has success in outside
networks.
1.open the mobile browser , type in your ip camera’s DDNS or Static Public IP (like:
http://demo.suneyes.hk or http://115.23.56.118:81
2.Log in user and password,select the Mobile Phone(for browser that supports Javascript)
User manual
35
4.4.2 Use the mobile Software
Install the software in your phone by the two ways below:
1. Directly visit the website with your phone at http://3g.suneyes.hk
A page will be appeared as below:
Choose Chinese or English version, i.e. click English then have the following page:
We offer IPhone,android,Symbian,Windows Mobile and Java phone.
User manual
36
5 FAQ
5.1 Frequently Asked Questions
Note: Any quesetions you would meet, please check Network connections firstly.
Check the working status revealed by the indicators on the network server, hub, exchange
and network card. If abnormal, check the network connections.
5.1.1 I have forgotten the administrator username and/or password.
To reset the administrator username and password, Press and hold down the RESET
BUTTON fur 7 seconds. Release the power button and the username and password will
be reset back to the factory default administrator username and password.
Default administrator username: admin
Default administrator password: No password
5.1.2 IP Address cojfiguration
Check whether IP address of the IP Ccamera server shares the same subnet as your
work station: Click My Computer >Control Panel> Network & Dial-up Connections > LAN
> Attributes >Internet Protocols (TCP/IP), and check IP Address and Subnet Mask. Make
sure they are in the same subnet when configuring IP Camera IP address manually.
Unable to access IP Camera via web browser
5.1.3 Network Configuration
Double Check to ensure that your HTTP server software is configured and running
properly. If you’re running any firewall software, make sure it’s allowing inbound
connections to port 80, Also, if you happen to be using a cable/DSL router, make sure
you’ve set up port forwarding properly. ( consult your router’s documentation for more
information ). If none of these seem to be the problem, it’s documentation for more
information ). If none of these seem to be the problem, it’s also possible that your ISP
isblocking inbound connections to port 80-many IPSS have done this because of internet
worms such as Code Red, If this is the case, you’ll have to setup your HTTP server on an
alternate port (such as 8080).
5.1.4 No pictures Problems with ActiveX Controller
If Internet Explorer is used as WEB Browser, download ActiveX controller and set the
safety property of IE in the PC when you view it first time:
“IE” browser > “Tool” > “Internet Proper” > “Security”> “Custom Level” > “ActiveX control
and Plug-ins” three options of front should be set to be “Enable”, The ActiceX programs
read by the computer will be stored, as follows:
User manual
37
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plu-ins
5.1.5 Problems with network bandwidth
The image frame rate is subjected to the following factors: 1, network bandwidth; 2, PC
performance, network environment and display preference setting (brightness, theme,
etc); 3, the number of visitors (Too many visitors will slow down the image frame rate.): 4,
choice of switch or hub (Use a switch for multiple IP Camera Servers rather than a HUB,).
5.1.6 For example: Register procedure from a DDNS web
Step 1: enter http://www.dyndns.com/ and Create Account
User manual
38
Step2: enter your information
Step3: After a minute, you will receive a E-mail from DynDNS Support and it will give you
a confirmation address
(e.g. https://www.dyndns.com/account/confirm/vXMVT78-KvenhydmKMWH5kg)
Step4: When the Account Confirmed, login and start using your account. Choose Add
Host Services and enter Add New Hostname page.
User manual
39
Step5: On the Add New Hostname page
1) input your Hostname.
2) Choose Host with IP address
3) Click Use auto detected IP address xxx.xx.xx.xxx Then click Create Host.
Step6: Now you obtained a Dynamic Domain Name(Figure 4.6), and can use it in the
DDNS Service Settings (details:2.5.3)
5.3 Specification
Item Specifications
Video Compression MJPEG video compression
Video Resolution Adjustment 640*480(VGA), 320*240(QVGA)
Video Parameters Brightness, contrast
User manual
40
Video Frame 25 frame/sec(QVGA), 15 frame/sec(VGA)
Communication interface One 10M/100Madaptive Ethemet interface
Wi-Fi Module Supporting IEEE802.11b/g/n
Power Supply DC 5V/1A
Maximum Power < 5W
Operating Temperature 0℃～+55℃ /+14℉～ +122℉
Storage Temperature -20℃～+70℃/ -44℉～+158℉
Operating Humidity 10～85%
System Requirements Microsoft Windows 98/ME/2000/XP/Vin7
Explorer Microsoft Internet Explorer 5.0 or above
Diminsions 110×110×100mm
Weight 600 g
5 OBTAINING TECHNICAL SUPPORT
While we hope your experience with the IP CAMERA network camera is enjoyable and
easy to use, you may experience some issues or have some questions that this User’s
Guide has not answered.
TO obtain the latest information and support for your Observer network camera, please
visit our webpage forr additional FAQ’S and troubleshooting tips.
Loading...