Sundance SMT8090-374 User Manual
SMT8090_374
User Manual
User Manual (QCF42); Version 3.0, 8/11/00; © Sundance Multiprocessor Technology Ltd. 1999
Version 0.9 Page 2 of 12 SMT8090 User Manual
Revision History
Date Comments Engineer Version
18/02/04 First release PSR 0.9
25/06/04 Updates PSR 1.0
Version 0.9 Page 3 of 12 SMT8090 User Manual
Table of Contents
Revision History............................................................................................................ 2
Table of Contents ......................................................................................................... 3
Contacting Sundance. .................................................................................................. 4
Notes............................................................................................................................. 4
Precautions................................................................................................................... 4
Outline description. ....................................................................................................... 5
Architecture................................................................................................................... 6
Hardware involved. ....................................................................................................... 7
Hardware installation. ................................................................................................... 8
Software applications. ................................................................................................ 11
3L application. ......................................................................................................... 11
Description of the functions in the test software menu. .......................................... 11
“Configuring FPGA - Full configuration - Loading keys and bitstream” ..... 11
“Configuring FPGA - FPGA Already configured - Loading END key only” ..... 11
“Pulse on Config Line - for FPGA reconfiguring” ................................................ 11
“Configuring internal Registers” .......................................................................... 11
“Reading-back internal registers” ........................................................................ 11
“Temperature Updates” ....................................................................................... 12
“Serial Numbers Read Back” .............................................................................. 12
“Capturing data” .................................................................................................. 12
Pegasus application (to be done). .......................................................................... 12
Version 0.9 Page 4 of 12 SMT8090 User Manual
Contacting Sundance.
You can contact Sundance for additional information by sending email to
support@sundance.com
.
Notes.
- SHB stands for Sundance High-speed Bus.
- CommPort denotes an 8-bit communication port following the TI C4x
standards.
Precautions
In order to guarantee that Sundance’s boards function correctly and to protect the
module from damage, the following precautions should be taken:
- They are static sensitive products and should be handled accordingly.
Always place the modules in a static protective bag during storage and
transition.
-
When operating, make sure that the heat generated by the system is
extracted e.g. a fan extracting heat or air blower. It is vital for the SMT390
daughter module.
Loading...