Sundance SMT8081 User Manual
SMT8081
User Manual
Version 1.0 Page 2 of 13 SMT8081 User Manual
Revision History
Date Comments Engineer Version
09/09/2005 Original Document PSR 1.0
Version 1.0 Page 3 of 13 SMT8081 User Manual
Table of Contents
Revision History.......................................................................................................... 2
Table of Contents....................................................................................................... 3
Contacting Sundance................................................................................................. 4
Notes..........................................................................................................................4
Precautions................................................................................................................. 4
Outline description...................................................................................................... 5
Main Modules description........................................................................................... 5
Architecture. ............................................................................................................... 6
Hardware installation.................................................................................................. 7
Hardware Connections............................................................................................. 10
Software applications. .............................................................................................. 11
3L application........................................................................................................ 11
Description of the functions in the test software menu.......................................... 11
“FPGA CONFIG - Pull INIT low - for reconfiguration (new bitstream)”............... 11
“FPGA CONFIG - Configure FPGA - for sending bitstream” ............................. 12
“FPGA CONFIG - Retrieve configuration - FPGA already configured”.............. 12
“RESET - DAC - all DAC internal registers”....................................................... 12
“RESET – FPGA - Reset FPGA DCM”.............................................................. 12
“SETTINGS - Select DAC Clock Source”.......................................................... 12
“SETTINGS - Clock Synthesizer Frequency Setting” ........................................ 12
“SETTINGS - VCO Frequency Setting”............................................................. 12
“SHB – using DPRAM Data Source - SHBTODPRAM mode”........................... 12
“SHB - Direct Data Source - SHBDIRECTODAC mode”................................... 12
“RSL – Loop-Back”............................................................................................ 13
“FPGA - Sinewave Pattern - LOOKUPTABLE mode” ........................................ 13
“DAC - Sinewave Generator - Dac Internal Memory Mode” .............................. 13
What is provided in the SMT8081
system? .............................................................. 13
Version 1.0 Page 4 of 13 SMT8081 User Manual
Contacting Sundance.
You can contact Sundance for additional information by sending email to
support@sundance.com.
Notes.
- SHB stands for Sundance High-speed Bus.
- RSL stands for Rocket Serial Link.
- Comport denotes an 8-bit communication port following the TI C4x standards.
- SMT8081 is a PCI system to be plugged in a PC. The only software
requirement is to have 3L Diamond server installed.
Precautions
In order to guarantee that Sundance’s boards function correctly and to protect the
module from damage, the following precautions should be taken:
- They are static sensitive products and should be handled accordingly.
Always place the modules in a static protective bag during storage and
transition.
- When operated in a closed environment make sure that the heat
generated by the system is extracted e.g. a fan extracting heat or blowing
cool air. Sundance recommends and uses PAPST 12-Volt fans (Series
8300) producing an air flow of 54 cubic meters per hour (equivalent to 31.8
CFM). Fans are placed so they blow across the PCI bus.
Loading...