Page 1
SMT6042
User Manual
Page 2
Version 1.0 Page 2 of 4 SMT6042 User Manual
Revision History
Date Comments Engineer Version
04/10/05 First release JPA 1.0
Page 3
Version 1.0 Page 3 of 4 SMT6042 User Manual
Table of Contents
Revision History.......................................................................................................... 2
Table of Contents....................................................................................................... 3
Introduction................................................................................................................. 4
Installation .................................................................................................................. 4
Examples.................................................................................................................... 4
Requirements............................................................................................................. 4
Page 4
Version 1.0 Page 4 of 4 SMT6042 User Manual
Introduction
The SMT6042 is a toolbox for Xilinx System Generator to design the FPGA on
Sundance’s modules.
The following modules are supported:
- SMT381-VP
- SMT391-VP
Installation
Unzip the package into <installdir>
Open Matlab and run <installdir>\startup.m
The documentation for each block is available by clicking the help button of the block.
Examples
Some example designs are provided to help you getting started.
The examples are available in the following directories:
- testSMT381 gathers the examples for the SMT381-VP
- testSMT391 gathers the examples for the SMT391-VP
Requirements
1 Matlab and Simulink R14 or above to able to run System Generator.
2 System Generator v7.1 or above
3 Xilinx ISE 7.1.3i
Loading...