Getting Started
With Your
4G LTE mobile phone
Model: N6201L, G4
SUN CUPID declares that this device complies with the essential
requirements and relevant provisions of the 2014/53/EU, 2014/30/
EU and 2014/35/EU directives.
SUN CUPID declares that the device complies with the International
guidelines on exposure of radio waves.
只供FCC認証使用
Index
G4 Overview 3
Setting Up Your Phone 4
Safety Information 6
Certificate 12
Warranty Information & Registration 15
Customer Support 15
只供FCC認証使用
Setting Up Your Phone
Follow these step-by-step instructions to set up your G4.
Power off the phone before inserting any cards!
1
Remove SIM Tray
• Remove the SIM tray by inserting a pin eject key/
paper clip in the small circular hole at the bottom of
the tray. The tray will then eject from the phone.
2
Configuration 1: Dual SIM Standby
• Orient SIM card to match layout on tray.
• SIM 1 (Nano) supports 4GLTE connections.
• SIM 2 (Nano) supports 4GLTE connections.
3
Configuration 2: microSD™ Card/SIM
• Orient microSD/SIM card to match layout on tray.
• microSD card supports up to 128GB
• SIM 2 (Nano) supports 4GLTE connections.
4
Replace SIM Tray
• After placing the SIMs and/or memory card in the
tray, slide it back into its slot. It will click and hold
in place.
5
Charge/Sync
• Plug in the type C connector to charge the phone or
transfer data.
1
Warning:
SIM cards are small enough to become a choking hazard, so
please keep them away from children & pets. SIM cards are also
quite delicate. Please be careful when handling your card.
4
只供FCC認証使用