Getting Started
With Your
LTE mobile phone
Model: N5704L, P1, G1
Hereby, SUN CUPID TECHNOLOGY (HK) LIMITED declares
that this Mobile phone is in compliance with the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
只供 FCC IC 認証使用
Index
G1 Overview 3
Setting up Your Phone 4
Getting Started 6
Safety information 8
Certificate 12
Warranty information & Registration 15
Customer Support 15
只供 FCC IC 認証使用
Setting Up Your Phone
Follow these step-by-step instructions to set up your G1.
Power off the phone before inserting any cards!
6
1
Remove Back Cover
• Remove the back cover by prying the lower left corner
2
Insert SIM
• Orient SIM card to match diagram on slot.
• SIM 1 (Micro) and SIM 2 (Nano) both support 4G LTE connections.
3
Insert microSD™ Memory Card (Optional)
• Remember to power off the phone and remove battery
4
Insert the Battery
• Align the battery contacts, then insert the battery
3
MicroSD
2
Sim2
of your device.
However, they do not support simultaneous 4G LTE.
before inserting memory card.
contact-first.
Sim1
2
battery
4
只供 FCC IC 認証使用
5
Replace Back Cover
• After installing the SIM card, memory card, and battery,
align the cover and snap it closed. Be sure to press all
around the edges to ensure a secure fit.
6
Charge/Sync
• Plug in the microUSB connector to charge the phone
or transfer data.
4
1
Warning:
SIM cards are small enough to become a choking hazard, so
please keep them away from Children & Pets. SIM cards are also
quite delicate. Please be careful when handling your card.
5
只供 FCC IC 認証使用
5